journal article·2021-03

Synthesis of High-Entropy AlNiCoFeCrTi Coating by Cold Spraying

A. I. Yurkova, D. V. Hushchyk, A. V. Minitsky

Powder Metallurgy and Metal Ceramics· Volume 59· Issue 11-12
Publisher page

Abstract

The cold spraying (CS) process was applied to deposit coatings using the AlCoNiFeCrTi high-entropy alloy (HEA) powder. The HEA powder was produced by short-time mechanical alloying (MA) of an equiatomic mixture in a planetary-ball mill followed by annealing at 1200°C and grinding of the resultant agglomerates. X-ray diffraction and microstructural analyses were employed to study the phase and structural transformations at different stages of producing the AlCoNiFeCrTi alloy powder and after it was sprayed onto a steel substrate. When the powder mixture was subjected to the MA process, a metastable nanostructured bcc solid solution formed. Annealing changed the phase composition of the alloy to an ordered bcc solid solution (B2 phase), intermetallic σ-phase (FeCr), and titanium carbide TiC. Grinding in a planetary-ball mill for 1 h turned the ordered B2 phase into a disordered nanostructured bcc solid solution. The titanium carbide and σ phase remained in the alloy, but particles of the σ phase significantly refined and partially dissolved in the bcc solid solution. Following deposition, the phase composition and nanostructured state of the starting alloy powder remained unchanged and the cold-sprayed coating consisted of a bcc solid solution, an intermetallic σ phase, and TiC carbide. The average coating thickness was 405 μm and Vickers microhardness HV was 10.0 ± 0.3 GPa. The high hardness of the coating was due to hardening effects: solid-solution and nanostructured hardening, hardening by inclusions of intermetallic and carbide phases, and strain hardening under severe plastic deformation in deposition at supersonic speeds (~105–107 sec–1) at low temperatures. The HEA coating showed good adhesion to the substrate and low porosity (<1%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. M.C. Gao, J.-W. Yeh, P.K. Liaw, and Y. Zhang (eds.), High-Entropy Alloys. Fundamentals and Applications, Elsevier, Amsterdam (2016), p. 516, DOI: https://doi:https://doi.org/10.1007/978-3-319-27013-5.10.1007/978-3-319-27013-5 ↗
2. B.S. Murty, J.-W. Yeh, S. Ranganathan, and P.P. Bhattacharjee, High-Entropy Alloys, 2nd ed.: Elsevier, Amsterdam (2019), p. 388, Paperback ISBN: 9780128160671, eBook ISBN: 9780128160688, https://www.elsevier.com/books/high-entropy-alloys/murty/978-0-12-816067-1.10.1016/B978-0-12-816067-1.00001-1 ↗
3. Yong Zhang, High-Entropy Materials. A Brief Introduction (eBook), Springer Nature Singapore Pte Ltd. (2019), https://doi.org/https://doi.org/10.1007/978-981-13-8526-110.1007/978-981-13-8526-1 ↗
4. Y.F. Ye, Q. Wang, J. Lu, C.T. Liu, and Y. Yang, “High-entropy alloys: challenges and prospects,” Mater. Today, 19, No. 6, 349–362 (2016), DOI: https://doi:https://doi.org/10.1016/j.mattod.2015.11.026.10.1016/j.mattod.2015.11.026 ↗
5. D.B. Miracle and O.N. Senkov, “A critical review of high entropy alloys and related concepts,” Acta Mater., 122, 488–511 (2017), DOI: https://doi:https://doi.org/10.1016/j.actamat.2016.08.081.10.1016/j.actamat.2016.08.081 ↗
6. K.K. Alanemea, M.O. Bodunrin, and S.R. Oke, “Processing, alloy composition and phase transition effect on the mechanical and corrosion properties of high entropy alloys: a review,” J. Mater. Res. Technol., 5, Issue 4, 384–393 (2016), DOI: https://doi:https://doi.org/10.1016/j.jmrt.2016.03.004.10.1016/j.jmrt.2016.03.004 ↗
7. J. Chen, X. Zhou, W. Wang, B. Liu, Y. Lv, D. Xu, W. Yang, and Y. Liu, “A review on fundamental of high entropy alloys with promising high-temperature properties,” J. Alloys Compd., 760, 15–30 (2018), DOI: https://doi.org/https://doi.org/10.1016/j.jallcom.2018.05.067.10.1016/j.jallcom.2018.05.067 ↗
8. Ch. Zhang, M.C. Gao, and Sh.-K. Lin, “Progress in high-entropy alloys,” JOM, 71, No. 10, 3417–3418 (2019), DOI: https://doi.org/https://doi.org/10.1007/s11837-019-03728-w.10.1007/s11837-019-03728-w ↗
9. J. Li, Y. Huang, X. Meng, and Xie Yu, “A review on high entropy alloys coatings: fabrication processes and property assessment,” Adv. Eng. Mater., 21, 15–30 (2019), DOI: https://doi.org/10.1002/adem.201900343.10.1002/adem.201900343 ↗
10. M. Vaidya, G.M. Muralikrishna, and B.S. Murty, “High-entropy alloys by mechanical alloying: A review,” J. Mater. Res., 34, 664–686 (2019), DOI: https://doi:https://doi.org/10.1557/jmr.2019.37.10.1557/jmr.2019.37 ↗
11. Weijie Yu, Yun Wang, Ruitao Li, and Junhong Mao, “Phase evolution, microstructure and mechanical property of AlCoCrFeNiTi high-entropy alloy coatings prepared by mechanical alloying and laser cladding,” Metals, 9, 1036–1047 (2019), DOI: https://doi.org/https://doi.org/10.3390/met9101036.10.3390/met9101036 ↗
12. F.Y. Shu, S. Liu, H.Y. Zhao, W.X. He, S.H. Sui, J. Zhang, P. He, and B.S. Xu, “Structure and hightemperature property of amorphous composite coating synthesized by laser cladding FeCrCoNiSiB highentropy alloy powder,” J. Alloys Compd., 731, 662–666 (2018), https://doi.org/https://doi.org/10.1016/j.jallcom.2017.08.248.10.1016/j.jallcom.2017.08.248 ↗
13. Z. Cai, X. Cui, Z. Liu, Y. Li, M. Dong, and G. Jin, “Microstructure and wear resistance of laser cladded Ni–Cr–Co–Ti–V high-entropy alloy coating after laser remelting processing,” Opt. Laser Technol., 99, 276–281 (2018), DOI: https://doi.org/https://doi.org/10.1016/j.optlastec.2017.09.012.10.1016/j.optlastec.2017.09.012 ↗
14. B. Jin, N. Zhang, S. Guan, Y. Zhang, and D. Li, “Microstructure and properties of laser re-melting FeCoCrNiAl0.5Six high-entropy alloy coatings,” Surf. Coat. Technol., 349, 867–873 (2018), https://doi.org/https://doi.org/10.1016/j.surfcoat.2018.06.032.10.1016/j.surfcoat.2018.06.032 ↗
15. Z. Cai, Y. Wang, X. Cui, G. Jin, Y. Li, Z. Liu, and M. Dong, “Design and microstructure characterization of FeCoNiAlCu high-entropy alloy coating by plasma cladding: In comparison with thermodynamic calculation,” Surf. Coat. Technol., 330, 163–169 (2017), DOI: https://doi.org/https://doi.org/10.1016/j.surfcoat.2017.09.083.10.1016/j.surfcoat.2017.09.083 ↗
16. J. Lu, B. Wang, X. Qiu, Z. Peng, and M. Ma, “Microstructure evolution and properties of CrCuFexNiTi high-entropy alloy coating by plasma cladding on Q235,” Surf. Coat. Technol., 328, 313–318 (2017), DOI: https://doi.org/10.1016/j.surfcoat.2017.08.019.10.1016/j.surfcoat.2017.08.019 ↗
17. W.L. Hsu, H. Murakami, J.W. Yeh, A.C. Yeh, and K. Shimoda, “On the study of thermal-sprayed Ni0.2Co0.6Fe0.2CrSi0.2AlTi0.2 HEA overlay coating,” Surf. Coat. Technol., 316, 71–74 (2017), DOI: https://doi.org/https://doi.org/10.1016/j.surfcoat.2017.02.073.10.1016/j.surfcoat.2017.02.073 ↗
18. W.L. Hsu, Y.C. Yang, C.Y. Chen, and J.-W. Yeh, “Thermal sprayed high-entropy NiCo0.6Fe0.2Cr1.5SiAlTi0.2 coating with improved mechanical properties and oxidation resistance,” Intermetallics, 89, 105–110 (2017), DOI: https://doi.org/https://doi.org/10.1016/j.intermet.2017.05.015.10.1016/j.intermet.2017.05.015 ↗
19. L.M. Wang, C.C. Chen, J.-W. Yeh, and S. T. Ke, “The microstructure and strengthening mechanism of thermal spray coating NixCo0.6Fe0.2CrySizAlTi0.2 high-entropy alloys,” Mater. Chem. Phys., 126, No. 3, 880–885 (2011), DOI: https://doi:https://doi.org/10.1016/j.matchemphys.2010.12.022.10.1016/j.matchemphys.2010.12.022 ↗
20. Q. Xing, H. Wang, M. Chen, Z. Chen, R. Li, P. Jin, and Y. Zhang, “Mechanical properties and corrosion resistance of NbTiAlSiZrNx high-entropy films prepared by RF magnetron sputtering,” Entropy, 21, 396–409 (2019), https://doi.org/https://doi.org/10.3390/e21040396.10.3390/e21040396 ↗
21. W. Zhang, R. Tang, Z.B. Yang, C.H. Liu, H. Chang, J.J. Yang, J.L. Liao, Y.Y. Yang, and N. Liu, “Preparation, structure, and properties of an AlCrMoNbZr high-entropy alloy coating for accident-tolerant fuel cladding,” Surf. Coat. Technol., 347, 13–19 (2018), DOI: https://doi.org/https://doi.org/10.1016/j.surfcoat.2018.04.037.10.1016/j.surfcoat.2018.04.037 ↗
22. F. Cao, P. Munroe, Z. Zhou, and Z. Xie, “Microstructure and mechanical properties of a multilayered CoCrNi/Ti coating with varying structure,” Surf. Coat. Technol., 350, 596–602 (2018), DOI: https://doi.org/https://doi.org/10.1016/j.surfcoat.2018.07.066.10.1016/j.surfcoat.2018.07.066 ↗
23. W. Li, H. Assadi, F. Gaertner, and S. Yin, “A review of advanced composite and nanostructured coatings by solid-state cold spraying process,” Crit. Rev. Solid State Mater. Sci., 44, 109–156 (2019), DOI: https://doi.org/https://doi.org/10.1080/10408436.2017.1410778.10.1080/10408436.2017.1410778 ↗
24. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkhimov, and V. Fomin, Cold Spray Technology, Elsevier Sci. (2007), p. 336, Hardcover ISBN: 9780080451558, eBook ISBN: 9780080465487, DOI: https://doi.org/https://doi.org/10.1016/B978-0-08-045155-8.X5000-5.10.1016/B978-0-08-045155-8.X5000-5 ↗
25. A.P. Alkhimov, A.N. Papyrin, V.F. Kosarev, N.I. Nesterovich, and M.M. Shushpanov, Gas-Dynamic Spraying Method for Applying a Coating, U.S. Patent 5302414A, publication date April 12 (1994).
26. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, and M. Dao, “Review cold spray coating: review of material systems and future perspectives,” Surf. Eng., 36, No. 6, 369–395 (2014), DOI: https://doi:https://doi.org/10.1179/1743294414y.0000000270.10.1179/1743294414y.0000000270 ↗
27. S. Yin, P. Cavaliere, B. Aldwell, R. Jenkins, H. Liao, W. Li, and R. Lupoi, “Cold spray additive manufacturing and repair: Fundamentals and applications,” Addit. Manuf., 21, 628–650 (2018), DOI: https://doi.org/https://doi.org/10.1016/j.addma.2018.04.017.10.1016/j.addma.2018.04.017 ↗
28. R.N. Raoelison, Y. Xie, T. Sapanathan, M.P. Planche, R. Kromer, S. Costil, and C. Langlade, “Cold gas dynamic spray technology: A comprehensive review of processing conditions for various technological developments till to date,” Addit. Manuf., 19, 134–159 (2018), DOI: https://doi:https://doi.org/10.1016/j.addma.2017.07.001.10.1016/j.addma.2017.07.001 ↗
29. M.R. Rokni, S.R. Nutt, C.A. Widener, V.K. Champagne, and R.H. Hrabe, “Review of relationship between particle deformation, coating microstructure, and properties in high-pressure cold spray,” J. Therm. Spray Technol., 26, No. 6, 1308–1355 (2017), DOI: https://doi:https://doi.org/10.1007/s11666-017-0575-0.10.1007/s11666-017-0575-0 ↗
30. C. Huang, W. Li, Y. Xie, M.P. Planche, H. Liao, and G. Montavon, “Effect of substrate type on deposition behavior and wear performance of Ni-coated graphite/Al composite coatings deposited by cold spraying,” J. Mater. Sci. Technol., 33, Issue 4, 338–346 (2017), DOI: https://doi.org/10.1016/j.jmst.2016.11.016.10.1016/j.jmst.2016.11.016 ↗
31. R. Jenkins, S. Yin, B. Aldwell, M. Meyer, and R. Lupoi, “New insights into the in-process densification mechanism of cold spray Al coatings: Low deposition efficiency induced densification,” J. Mater. Sci. Technol., 35, 427–431 (2019), DOI: https://doi.org/10.1016/j.jmst.2018.09.045. URL: https://www.jmst.org/EN/https://doi.org/10.1016/j.jmst.2018.09.045 or https://www.jmst.org/EN/Y2019/V35/I3/427.10.1016/j.jmst.2018.09.045 10.1016/j.jmst.2018.09.045 ↗
32. Yin Shuo, Emmanuel J. Ekoi, Thomas L. Lupton, Denis P. Dowling, and Rocco Lupoi, “Cold spraying of WC–Co–Ni coatings using porous WC–17Co powders: Formation mechanism, microstructure characterization and tribological performance,” Mater. Des., 126, 305–313 (2017), DOI: https://doi.org/https://doi.org/10.1016/j.matdes.2017.04.040.10.1016/j.matdes.2017.04.040 ↗
33. A. Anupam, S. Kumar, N.M. Chavan, B.S. Murty, and R.S. Kottada, “First report on cold-sprayed AlCoCrFeNi high-entropy alloy and its isothermal oxidation,” J. Mater. Res., 34, Issue 5 (2019), DOI: https://doi.org/https://doi.org/10.1557/jmr.2019.38.10.1557/jmr.2019.38 ↗
34. S. Yin, W. Li, B. Song, X. Yan, M. Kuang, Y. Xu, K. Wen, and R. Lupoi, “Deposition of FeCoNiCrMn high entropy alloy (HEA) coating via cold spraying,” J. Mater. Sci. Technol., 35, No. 6, 1003–1007 (2019), DOI: https://doi.org/https://doi.org/10.1016/j.jmst.2018.12.015.10.1016/j.jmst.2018.12.015 ↗
35. M.-H. Tsai, R.-C. Tsai, T. Chang, and W.-F. Huang, “Intermetallic phases in high-entropy alloys: statistical analysis of their prevalence and structural inheritance,” Metals, 9, 247–265 (2019), DOI: https://doi:https://doi.org/10.3390/met9020247.10.3390/met9020247 ↗
36. S. Guo and C.T. Liu, “Phase stability in HEAs: formation of solid-solution phase or amorphous phase,” Prog. Mater. Sci: Mater. Int., No. 21, 433–446 (2011), DOI: https://doi:https://doi.org/10.1016/s1002-0071(12)60080-x.10.1016/s1002-0071(12)60080-x ↗
37. B.D. Cullity and S.R. Stock, Elements of X-Ray Diffraction, 3rd ed., Pearson Education Limited (2014), p. 654, ISBN 10: 1-292-04054-8. ISBN 13: 978-1-292-04054-7.
38. B.A. Galanov, Yu.V. Milman, S.I. Chugunova, and I.V. Goncharova, “Investigation of mechanical properties of high-hardness materials by indentation,” Superhard Mater., 21, No. 3, 23–35 (1998).
39. S. Varalakshmi, M. Kamaraj, and B. S. Murty, “Formation and stability of equiatomic and nonequiatomic nanocrystalline CuNiCoZnAlTi high-entropy alloys by mechanical alloying,” Metall. Mater. Trans. A, 41, No. 10, 2703–2709 (2010), DOI: https://doi:https://doi.org/10.1007/s11661-010-0344-x.10.1007/s11661-010-0344-x ↗
40. A.I. Yurkova, V.V.Chernyavskii, and V.F. Gorban, “Structure and mechanical properties of high-entropy AlCuNiFeТі and AlCuNiFeCr alloys produced by mechanical activation followed by pressure sintering,” Powder Metall. Met. Ceram., 55, No. 3–4, 152–163 (2016).10.1007/s11106-016-9790-3 ↗
41. A.I. Yurkova, V.V. Chernyavsky, V. Bolbut, M. Krüger, and I. Bogomol, “Structure formation and mechanical properties of high-entropy AlCuNiFeCr alloy prepared by mechanical alloying and spark plasma sintering,” J. Alloys Compd., 786, 139–148 (2019), DOI: https://doi:https://doi.org/10.1016/j.jallcom.2019.01.341.10.1016/j.jallcom.2019.01.341 ↗
42. J.-W. Yeh, S.-Y. Chang, Y.-D. Hong, S.-K. Chen, and S.-J. Lin, “Anomalous decrease in X-ray diffraction intensities of Cu–Ni–Al–Co–Cr–Fe–Si alloy systems with multi-principal elements,” J. Mater. Chem. Phys., 103, No. 41, 41–46 (2007), DOI: https://doi:https://doi.org/10.1016/j.matchemphys.2007.01.003.10.1016/j.matchemphys.2007.01.003 ↗
43. C. Suryanarayana, “Mechanical alloying and milling,” Prog. Mater. Sci., 46, No. 1–2, 1–184 (2001), DOI: https://doi:https://doi.org/10.1016/s0079-6425(99)00010-9.10.1016/s0079-6425(99)00010-9 ↗
44. Sherif El-Eskandarany, Mechanical Alloying Nanotechnology, Materials Science and Powder Metallurgy, Second ed., Elsevier (2015), p. 340, ISBN: 978-1-4557-7752-5, DOI: http://dx.doi.org/https://doi.org/10.1016/B978-1-4557-7752-5.00001-2.10.1016/B978-1-4557-7752-5.00001-2 ↗
45. K.B. Zhang, Z.Y. Fu, J.Y. Zhang, J. Shi, W.M. Wang, H. Wang, Y.C. Wang, and Q.J. Zhang, “Nanocrystalline CoCrFeNiCuAl high-entropy solid solution synthesized by mechanical alloying,” J. Alloys Compd., 485, No. 1–2, 31–34 (2009), DOI: https://doi.org/https://doi.org/10.1016/j.jallcom.2009.05.144.10.1016/j.jallcom.2009.05.144 ↗
46. H.X. Sui, M. Zhu, M. Qi, G.B. Li, and D.Z. Yang, “The enhancement of solid solubility limits of AlCo intermetallic compound by high-energy ball milling,” J. Appl. Phys., 71, No. 6, 2945–2949 (1992), DOI: https://doi:https://doi.org/10.1063/1.351028.10.1063/1.351028 ↗
47. K.B. Zhang, Z.Y. Fu, J.Y. Zhang, J. Shi, W.M. Wang, H. Wang, Y.C. Wang, and Q.J. Zhang, “Nanocrystalline CoCrFeNiCuAl high-entropy solid solution synthesized by mechanical alloying,” J. Alloys Compd., 485, L31–L34 (2009), DOI: https://doi.org/https://doi.org/10.1016/j.jallcom.2009.05.144.10.1016/j.jallcom.2009.05.144 ↗
48. M.H. Tsai, K.Y. Tsai, C.W. Tsai, C. Lee, C.C. Juan, and J.W. Yeh, “Criterion for sigma phase formation in Cr- and V-containing high-entropy alloys,” Mater. Res. Lett., 1, 207–212 (2013), DOI: https://doi.org/https://doi.org/10.1080/21663831.2013.831382.10.1080/21663831.2013.831382 ↗
49. B.S. Murty and S. Ranganathan, “Novel materials synthesis by mechanical alloying/milling,” Int. Mater. Rev., 43, 101–141 (1998), DOI: https://doi:https://doi.org/10.1179/imr.1998.43.3.101.10.1179/imr.1998.43.3.101 ↗
50. Y.F. Juan, J. Li, Y.Q. Jiang, W.L. Jia, and Z.J. Lu, “Modified criterions for phase prediction in the multicomponent laser-clad coatings and investigations into microstructural evolution/wear resistance of FeCrCoNiAlMo. laser-clad coatings,” Appl. Surf. Sci., 465, 700–714 (2019), DOI: https://doi.org/https://doi.org/10.1016/j.apsusc.2018.08.264.10.1016/j.apsusc.2018.08.264 ↗
51. H. Zhang, Y. Pan, Y. He, and H. Jiao, “Microstructure and properties of Fe6NiCoSiCrAlTi high-entropy alloy coating prepared by laser cladding,” Appl. Surf. Sci., 257, 2259–2263 (2011).10.1016/j.apsusc.2010.09.084 ↗
52. L. Tian, Z. Feng, and W. Xiong, “Microstructure, microhardness, and wear resistance of AlCoCrFeNiTi/Ni60 coating by plasma spraying,” Coatings, 8, 112 (2018), DOI: https://doi.org/10.3390/coatings8030112.10.3390/coatings8030112 ↗
53. A.S.M. Ang, C.C. Berndt, M.L. Sesso, A. Anupam, P.S. Rathod, R.S. Kottada, and B.S. Murty, “Plasmasprayed high entropy alloys: Microstructure and properties of AlCoCrFeNi and MnCoCrFeNi,” Metall. Mater. Trans. A, 46, 791–800 (2015), DOI: https://doi.org/https://doi.org/10.1007/s11661-014-2644-z.10.1007/s11661-014-2644-z ↗
54. L. Tian, “Microstructure and wear behavior of atmospheric plasma-sprayed AlCoCrFeNiTi high-entropy alloy coating,” J. Mater. Eng. Perform., 25, 5513–5521 (2016), DOI: https://doi.org/10.1007/s11665-016-2396-6.10.1007/s11665-016-2396-6 ↗
55. M. Löbel, T. Lindner, T. Mehner, and L. Thomas, “Microstructure and wear resistance of AlCoCrFeNiTi highentropy alloy coatings produced by HVOF,” Coatings, 7, 144–152 (2017), DOI: https://doi.org/https://doi.org/10.3390/coatings7090144.10.3390/coatings7090144 ↗
56. L. Chen, K. Bobzin, Z. Zhou, L. Zhao, M. Ote, T. Königstein, Z. Tan, and D. He, “Wear behavior of HVOF-sprayed Al0.6TiCrFeCoNi high entropy alloy coatings at different temperatures,” Surf. Coat. Technol., 358, 215–222 (2019), DOI: https://doi.org/https://doi.org/10.1016/j.surfcoat.2018.11.052.10.1016/j.surfcoat.2018.11.052 ↗