Effect of deformation processing on the properties of Cu–50% Cr composite
Source abstract
Abstract
The paper examines the structure, density, resistivity, and mechanical properties of Cu–50 wt.% Cr powder composite after liquid-phase sintering at 1200°C in hydrogen and subsequent deformation processing: additional cold pressing under 550–600 MPa, sintering under 8.5 MPa at 1100°C, and hot forging beginning from 850°C. It is shown that the maximum compaction of the composite (up to 99% of the theoretical density), decrease in its resistivity, and increase in strength and plasticity are reached in hot forging in a closed die mold and subsequent annealing at 600°C to relieve internal stresses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. T. Matsuo, H. Fujimori, and S. Yanabu, “Insulation recovery characteristics after current interruption by various vacuum interrupter electrodes,” IEEE Trans. on Dielectrics and Electrical Insulation, 13, No.1, 11–17 (2006).10.1109/TDEI.2006.1593396 ↗
2. P. G. Paul, “Advances in material development for high power vacuum interrupter contacts,” Components, Packaging, and Manufacturing Technology. Part A, 17, No. 1, 96–106 (1994).10.1109/95.296374 ↗
3. R. V. Minakova, S. P. Gordienko, E. V. Khomenko, et al., “On sintering of Cr–Cu composites used as contacts for vacuum arc-suppressing chambers,” in: Proc. Int. Conf. Electrical Contacts EC-2002 (May 22–25, 2002, Saint-Petersburg, Russia) [in Russian], Saint-Petersburg (2002), pp. 68–72.
4. O. I. Get’man, N. D. Lesnik, R. V. Minakova, and E. V. Khomenko, “Structuring on sintering in the presence of liquid phase in Cr–Cu–iron group metal systems. I. Cr–Cu system,” Powder Metall. Met Ceram., 45, No. 5–6, 215–220 (2006).10.1007/s11106-006-0066-1 ↗
5. N. P. Lyakishev (ed.), Phase Diagrams of Binary Metal Systems: Handbook (in 2 Vols.) [in Russian], Vol. 1, Mashinostroenie, Moscow (1999), p. 1023.
6. S. S. Gorelik, L. N. Rastorguev, and Yu. A. Skakov, X-Ray and Electron-Optical Analysis [in Russian], Metallurgiya, Moscow (1970), p. 367.
7. N. D. Lesnik, R. V. Minakova, and E. V. Khomenko, “Chromium–copper system: adhesion characteristics, doping, the structure of phase boundary and composites,” Powder Metal. Met. Ceram., 40, No. 7–8, 426–431 (2001).
8. M. Yu. Bal’shin, Scientific Basis of Powder Metallurgy [in Russian], Metallurgiya, Moscow (1972), p. 336.
9. Yu. G. Dorofeev, Dynamic Hot Pressing of Porous Powder Billets [in Russian], Metallurgiya, Moscow (1977), p. 216.