The Effect of Charge Component Composition on the Structure and Properties of Titanium Matrix Sintered Composites with High-Modulus Compounds
Source abstract
Abstract
The effect of the powder matrix base (Ti and TiH2) and the type of reinforcing additives (5 wt.% TiC, TiB2, B, and B4C) on the structurization features and some properties of metallic matrix composites sintered hereof is investigated. It is shown that the application of titanium hydride powder with TiC and TiB2 additives as the starting powder base allows obtaining sintered materials with lower porosity (≤2%) and higher hardness, compared to the composites produced based on commercial titanium powder. The microstructure of sintered composites considerably depends on the type of reinforcing additives. TiC particles hardly interact with the matrix phase and they are relatively equilibrium, while the TiB inclusions (as it is in the case of TiB2 additive) are acicular 1–5 μm in dia. and 10–25 μm long. The microstructure of the composites sintered from the mixture of titanium hydride and boron carbide powders has conglomerates 20–50 μm in size, consisting of highly dispersed acicular particles of titanium boride phases and unimportant number of TiC equilibrium particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. A. A. Il’in, B. A. Kolachev, and I. S. Pol’kin, Titanium Alloys. Composition, Structure, and Properties: Handbook [in Russian], VILS–MATI, Мoscow (2009), p. 520.
2. B. A. Kolachev, I. S. Eliseev, A. G. Bratukhin (Ed.), and V. D. Tatalaev, Titanium Alloys in Designs of Aircraft and Aerospace Technology [in Russian], Izd. MAI, Moscow (2001), p.416.
3. Titanium-2003: Science and Technology in: Proc. 10th World Conf. on Titanium (13–18 July 2003, Germany), Yamburg, Germany (2003), Vol. 1, No. 5, p.3425.
4. H. W. Wang, J. Q. Qi, C. M. Zou, et al., “High-temperature tensile strengths of in situ synthesized TiC/Tialloy composites,” Mater. Sci. Eng. A, 545, 209–213 (2012).10.1016/j.msea.2012.03.037 ↗
5. H. K. S. Rahoma, X. P. Wang, F. T. Kong, et al., “Effect of (α + β) heat treatment on microstructure and mechanical properties of (TiB + TiC)/Ti–B20 matrix composite,” Mater. Design., 87, 488–494 (2015).10.1016/j.matdes.2015.08.028 ↗
6. C. Poletti, M. Balog, and T. Schubert, “Production of titanium matrix composites reinforced with SiC particles,” Comp. Sci. Technol., 68, 2171–2177 (2008).10.1016/j.compscitech.2008.03.018 ↗
7. S. Li, K. Kondoh, H. Imai, et al., “Microstructure and mechanical properties of P/M titanium matrix composites reinforced by in-situ synthesized TiC–TiB. Mater. Sci. Eng. A, 628, 75–83 (2015).10.1016/j.msea.2015.01.033 ↗
8. V. N. Antsiferov, V. S. Ustinov, Yu. G. Olesov, Titanium-Based Sintered Alloys [in Russian], Metallurgiya, Moscow (1984), p.168.
9. M. Sumida and K. Kondoh, “In-situ synthesis of Ti matrix composite reinforced with dispersed Ti5Si3 particles via spark plasma sintering,” Mater. Trans., 46, No. 10, 2135–2141 (2005).10.2320/matertrans.46.2135 ↗
10. O. M. Ivasishin, A. N. Demidik, and D. G. Savvakin, “Use of titanium hydride for the synthesis of titanium aluminides from powder materials,” Powder Metall. Metal. Ceram., 38, No. 9, 468–487 (1999).
11. G. A. Baglyuk, A. G. Bogacheva, A. A. Mamonova, and I. B. Tikhonova, “The features of structurization, when heating the TiH2–Mn–Si–Fe–C powder charge,” Vis. Skhidnoukr. Nats. Unuv., No. 9(1), 240–247 (2013).
12. T. Saito, “The automotive application of discontinuously reinforced TiB–Ti composites,” J. Minerals, Metals & Materials Soc., 56, No. 5, 33–36 (2004).10.1007/s11837-004-0125-3 ↗
13. L. Shufeng, K. Katsuyoshi, I. Hisashi, et al., “Microstructure and mechanical properties of P/M titanium matrix composites reinforced by in-situ synthesized TiC–TiB,” Mater. Sci. Eng. A, 628, 75–83 (2015).10.1016/j.msea.2015.01.033 ↗
14. D. R. Ni, L. Geng, J. Zhang, and Z. Z. Zheng, “Fabrication and tensile properties of in situ TiBw and TiC hybrid-reinforced titanium matrix composites based on Ti–B4C–C,” Mater. Sci. Eng. A, 478, 291–296 (2008).10.1016/j.msea.2007.06.004 ↗
15. L. Weijie, Z. Di, Z. Xiaong, et al., “Microstructure and compressive properties of in situ synthesized (TiB +TiC)/Ti composites,” Mater. Trans., 42, No. 11, 1555–1561 (2000).
16. K. L. Seung, K. Do-Hyeong, and H. K. Chong, “Fabrication of TiB2/TiC composites by directional reaction of titanium with boron carbide,” J. Mater. Sci., 29, 4125–4130 (1994).10.1007/BF00355981 ↗
17. X. Zhang, C. Zhu, W. Qu, et al., “Self-propagating high temperature combustion synthesis of TiC/TiB2 ceramic–matrix composites,” Comp. Sci. Technol., 62, 2037–2041 (2002).10.1016/S0266-3538(02)00155-0 ↗
18. J.-X. Tang, J.-H. Cheng, Z. Zhao-Qiang, H.-Z. Miao, “Diffusion path and reaction mechanism between Ti and B4C,” J. Inorgan. Mater., 15, No. 5, 884–888 (2000).