journal article·2018-03

Effect of Graphene Nanoplatelets on Microstructure and Mechanical Properties of AlSi10Mg Nanocomposites Produced by Hot Extrusion

A. Saboori, R. Casati, A. Zanatta, M. Pavese, C. Badini, M. Vedani

Powder Metallurgy and Metal Ceramics· Volume 56· Issue 11-12
Publisher page

Abstract

In this research, AlSi10Mg composites reinforced with graphene nanoplatelets (GNPs) were fabricated in order to study the effect of GNPs on microstructure and mechanical properties of the AlSi10Mg alloy. The composites were produced by a wet mixing method followed by two-step hot consolidation (hot compaction then hot extrusion) at 673 K (400°C). The weight percentages of GNPs were 0.5 and 1 wt.% with respect to the AlSi10Mg alloy. Tensile and Vickers hardness tests at room temperature were performed to evaluate the effect of GNPs on mechanical properties of asfabricated composite. The outcomes show that the high quantity of GNPs (>0.5 wt.%) deteriorates the mechanical properties of AlSi10Mg composite due to the agglomeration of GNPs and, as a consequence, introduction of internal porosity in the composite. However, it is found that relatively low fraction of GNPs can uniformly be dispersed in the Al alloy matrix through the wet mixing method. The hardness and tensile results demonstrated that the mechanical properties improve slightly through the addition of 0.5 wt.% of GNPs, while 1.0 wt.% GNPs addition did not lead to improved performance owing to overwhelming effects of porosity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Material Properties and Applications · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Z. Fan, A. Marconnet, S. T. Nguyen, et al., “Effects of heat treatment on the thermal properties of highly nanoporous graphene aerogels using the infrared microscopy technique,” Int. J. Heat Mass Transf., 76, 122 (2014).10.1016/j.ijheatmasstransfer.2014.04.023 ↗
2. A. Saboori, M. Pavese, C. Badini, et al., “A novel approach to enhance the mechanical strength and electrical and thermal conductivity of Cu–GNP nanocomposites,” Metall. Mat. Trans. A, 49, 333 (2018).10.1007/s11661-017-4409-y ↗
3. A. Saboori, S. K. Moheimani, M. Pavese, et al., “New nanocomposite materials with improved mechanical strength and tailored coefficient of thermal expansion for electro-packaging applications,” Metals, 7, 536 (2017).10.3390/met7120536 ↗
4. A. K. Geim and K. S. Novoselov, “The rise of graphene,” Nat. Mater., 6, No. 3, 183 (2007).10.1038/nmat1849 ↗
5. X. Lin, X. Liu, J. Jia, et al., “Electrical and mechanical properties of carbon nanofiber/graphene oxide hybrid papers,” Compos. Sci. Technol., 100, 166 (2014).10.1016/j.compscitech.2014.06.012 ↗
6. A. Saboori, M. Pavese, C. Badini, et al., “Development of Al- and Cu-based nanocomposites reinforced by graphene nanoplatelets: Fabrication and characterization,” Front. Mater. Sci., 11, 171 (2017).10.1007/s11706-017-0377-9 ↗
7. E. Zaminpayma and P. Nayebi, “Mechanical and electrical properties of functionalized graphene nanoribbon: A study of reactive molecular dynamic simulation and density functional tight-binding theory,” Phys. B: Condens. Matter., 459, 29 (2015).10.1016/j.physb.2014.11.015 ↗
8. M. Asif, T. Yi, L. Pan, et al., “Thickness controlled water vapors assisted growth of multilayer graphene by ambient pressure chemical vapor deposition,” J. Phys. Chem. C., 119, 3079 (2015).10.1021/jp510106w ↗
9. Y. Lei, J. Sun, and X. Gong, “Mechanical and vibrational responses of gatetunable graphene resonator,” Phys. B: Condens. Matter., 461, 61 (2015).10.1016/j.physb.2014.12.012 ↗
10. A. Saboori, C. Novara, M. Pavese, et al., “An investigation on the sinterability and compaction behavior of Aluminum/Graphene nanoplatelets (GNPs) prepared by powder metallurgy,” J. Mater. Eng. Perform., 26, 993–999 (2017).10.1007/s11665-017-2522-0 ↗
11. V. Vijayaraghavan, A. Garg, C. H. Wong, et al., “Measurement of properties of graphene sheets subjected to drilling operation using computer simulation,” Measurement, 50, 50 (2014).10.1016/j.measurement.2013.12.028 ↗
12. A. Saboori, M. Pavese, C. Badini, et al., “A novel Cu–GNPs nanocomposites with improved thermal and mechanical properties,” Acta Metall. Sin. (Engl. Lett.) (2017).10.1007/s40195-017-0643-y ↗
13. Y. Y. Zhang, C. M. Wang, Y. Cheng, et al., “Mechanical properties of bilayer graphene sheets coupled by sp 3 bonding,” Carbon, 49, No. 13, 4511 (2011).10.1016/j.carbon.2011.06.058 ↗
14. N. Hong, J. Zhan, X. Wang, et al., “Enhanced mechanical, thermal and flame retardant properties by combining graphene nanosheets and metal hydroxide nanorods for Acrylonitrile–Butadiene–Styrene copolymer composite,” Compos. Part A: Appl. Sci. Manuf., 64, 203 (2014).10.1016/j.compositesa.2014.04.015 ↗
15. K. Hu, D. D. Kulkarni, I. Choi, et al., “Graphene-polymer nanocomposites for structural and functional applications,” Prog. Polym. Sci., 39, No. 11, 1934 (2014).10.1016/j.progpolymsci.2014.03.001 ↗
16. A. Saboori, M. Pavese, C. Badini, et al., “Microstructure and thermal conductivity of Al–Graphene composites fabricated by powder metallurgy and hot rolling techniques,” Acta. Metall. Sin. (Engl. Let.), 30, No. 7, 675 (2017).10.1007/s40195-017-0579-2 ↗
17. J. Ma, Q. Meng, I. Zaman, et al., “Development of polymer composites using modified, high-structural integrity graphene platelets,” Comp. Sci. Technol., 91, 82 (2014).10.1016/j.compscitech.2013.11.017 ↗
18. S. H. Ryu and A. M. Shanmugharaj, “Influence of long-chain alkylamine-modified graphene oxide on the crystallization, mechanical and electrical properties of isotactic polypropylene nanocomposites,” Chem. Eng. J., 244, 552 (2014).10.1016/j.cej.2014.01.101 ↗
19. D. S. Yu, T. Kuila, N. H. Kim, et al., “Enhanced properties of aryl diazonium salt-functionalized graphene/poly(vinyl alcohol) composites,” Chem. Eng. J., 245, 311 (2014).10.1016/j.cej.2014.02.025 ↗
20. J. Zhang and D. Jiang, “Molecular dynamics simulation of mechanical performance of graphene/graphene oxide paper based polymer composites,” Carbon, 67, 784 (2014).10.1016/j.carbon.2013.10.078 ↗
21. K. Wang, Y. Wang, Z. Fan, et al., “Preparation of graphene nanosheet/alumina composites by spark plasma sintering,” Mater. Res. Bull., 46, 315 (2011).10.1016/j.materresbull.2010.11.005 ↗
22. L. S. Walker, V. R. Marotto, M. A. Rafiee, et al., “Toughening in graphene ceramic composites,” ACS Nano, 5, 3182 (2011).10.1021/nn200319d ↗
23. W. J. Kim, T. J. Lee, and S. H. Han, “Multi-layer graphene/copper composites: Preparation using high-ratio differential speed rolling, microstructure and mechanical properties,” Carbon, 69, 55 (2014).10.1016/j.carbon.2013.11.058 ↗
24. M. Rashad, F. Pan, A. Tang, et al., “Development of magnesium-graphene nanoplatelets composite,” J. Compos. Mater., 49, 285 (2015).10.1177/0021998313518360 ↗
25. L. Y. Chen, H. Konishi, and A. Fehrenbacher, “Novel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites,” Scr. Mater., 67, 29 (2012).10.1016/j.scriptamat.2012.03.013 ↗
26. M. Rashad, F. Pan, A. Tang, et al., “Effect of graphene nanoplatelets (GNPs) addition on strength and ductility of magnesium-titanium alloys,” J. Magn. All., 1, 242 (2013).10.1016/j.jma.2013.09.004 ↗
27. M. Rashad, F. Pan, M. Asif, and A. Tang, “Powder metallurgy of Mg–1%Al–1%Sn alloy reinforced with low content of graphene nanoplatelets (GNPs),” J. Ind. Eng. Chem., 20, 4250 (2014).10.1016/j.jiec.2014.01.028 ↗
28. M. Rashad, F. Pan, A. Tang, et al., “Synergetic effect of graphene nanoplatelets (GNPs) and multi-walled carbon nanotube (MW–CNTs) on mechanical properties of pure magnesium,” J. Alloys Compd., 603, 111 (2014).10.1016/j.jallcom.2014.03.038 ↗
29. S. F. Bartolucci, J. Paras, M. A. Rafiee, et al., “Graphene–aluminum nanocomposites,” Mater. Sci. Eng. A, 528, 7933 (2011).10.1016/j.msea.2011.07.043 ↗
30. J. Wang, Z. Li, G. Fan, et al., “Reinforcement with graphene nanosheets in aluminum matrix composites,” Scr. Mater., 66, No. 8, 594 (2012).10.1016/j.scriptamat.2012.01.012 ↗
31. M. Rashad, F. Pan, Z. Yu, et al., “Investigation on microstructural, mechanical and electrochemical properties of aluminum composites reinforced with graphene nanoplatelets,” Prog. Nat. Sci. Mater. Int., 25, 460–470 (2015).10.1016/j.pnsc.2015.09.005 ↗
32. A. Saboori, M. Pavese, C. Badini, et al., “Effect of sample preparation on the microstructural evaluation of Al–GNPs nanocomposites,” Metallogr. Microstruc. Anal., 6, 619 (2017).10.1007/s13632-017-0397-y ↗
33. R. Pérez-Bustamante, D. Bolaños-Morales, J. Bonilla-Martínez, et al., “Microstructural and hardness behavior of graphene-nanoplatelets/ aluminum composites synthesized by mechanical alloying,” J. Alloys Compd., 615, 578 (2014).10.1016/j.jallcom.2014.01.225 ↗
34. M. Rashad, F. Pan, A. Tang, and M. Asif, “Effect of Graphene Nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method,” Prog. Nat. Sci. Mater. Int., 24, 101 (2014).10.1016/j.pnsc.2014.03.012 ↗
35. R. Casati and M. Vedani, “Metal matrix composites reinforced by nano-particles – A Review,” Metals, 4, 65–83 (2014).10.3390/met4010065 ↗
36. T. W. Clyne, An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge (1995), p. 26.
37. Z. Zhang and D. L. Chen, “Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength,” Scr. Mater., 54, 1321 (2006).10.1016/j.scriptamat.2005.12.017 ↗
38. A. Saboori, Metal Matrix Nanocomposites; Potentials, Challenges, Feasible Solutions, Politecnico di Torino (2017).
39. J. W. Luster, M. Thumann, R. Baumann, “Mechanical properties of aluminium alloy 6061–Al2O3 composites,” Mater. Sci. Technol., 9, 853 (1993).10.1179/026708393790171421 ↗
40. R. M. Aikin Jr and L. Christodoulou, “The role of equiaxed particles on the yield stress of composites,” Scr. Metall. Mater., 25, 9 (1991).10.1016/0956-716X(91)90345-2 ↗
41. K. Chu, Z. Liu, C. Jia, et al., “Thermal conductivity of SPS consolidated Cu/diamond composites with Crcoated diamond particles,” J. Alloys Compd., 490, 453 (2010).10.1016/j.jallcom.2009.10.040 ↗
42. A. Yu, P. Ramesh, M. E. Itkis, et al., “Graphite nanoplatelet–epoxy composite thermal interface materials,” J. Phys. Chem. C, 111, 7565 (2007).10.1021/jp071761s ↗
43. M. Bastwros, G. Kim, C. Zhu, et al., “Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering,” Compos. Part B, 60,111–118 (2014).10.1016/j.compositesb.2013.12.043 ↗