The Effect of Vanadium and Titanium on Mechanical Properties of Microalloyed PM Steel
Source abstract
Abstract
The effect of Ti and V additives on the microstructure and mechanical properties of microalloyed powder metallurgy (PM) steels is investigated. The microstructure of microalloyed PM steels is characterised with the help of optic microscope, SEM and EDS. The results showed that the addition of Ti and V elements has a beneficial effect on the improved mechanical properties. Ti–V microalloyed PM steels can be used to take advantage of improved grain refining propensity of titanium, whilst allowing vanadium to be used as dispersion strengtheners and to enhance the hardenability and transformation characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. J. Chen, M. Lv, S. Tang, et al., “Influence of cooling paths on microstructural characteristics and precipitation behaviors in a low carbon V–Ti microalloyed steel,” Mater. Sci. Eng. A, 594, 389–393 (2014).10.1016/j.msea.2013.09.086 ↗
2. S. M. K. Hosseini, A. Zarei-Hanzaki, E. Essadiqi, and S. Yue, “Effect of prior austenite characteristics on mechanical properties of thermomechanically processed multiphase TRIP assisted steels,” Mater. Sci. Tech., 24, No. 11, 1354–1361 (2008).10.1179/174328407X192813 ↗
3. M. Jahazi and B. Eghbali, “The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels,” J. Mater. Proc. Tech., 113, Nos. 1–3, 594–598 (2001).10.1016/S0924-0136(01)00599-4 ↗
4. S. Shanmugam, M. Tanniru, R. D. K. Misra, et al., “Precipitation in V bearing microalloyed steel containing low concentrations of Ti and Nb,” Mater. Sci. Tech., 21, No. 8, 883–892 (2005).10.1179/174328405X47564 ↗
5. A. Ghosh, S. Chatterjee, B. Mishra, and S. Das, “Microstructure, properties, and age hardening behavior of a thermomechanically processed ultralow-carbon Cu-bearing high-strength steel,” Metall. Mater. Trans. A, 36, No. 3, 703–713 (2005).10.1007/s11661-005-0186-0 ↗
6. M. Olasolo, P. Uranga, J. M. Rodriguez-Ibabe, and B. Lopez, “Effect of austenite microstructure and cooling rate on transformation characteristics in a low carbon Nb–V microalloyed steel,” Mater. Sci. Eng. A, 528, No. 6, 2559–2569 (2010).10.1016/j.msea.2010.11.078 ↗
7. T. Gladman, “Grain refinement in multiple microalloyed steels,” in: HSLA Steels: Processing, Properties and Applications, Minerals, Metals and Materials Society Warrendale, PA (1992), pp. 3–14.
8. T. N. Baker, “Process, microstructure and properties of vanadium microalloyed steels,” Mater. Sci. Tech., 25, No. 9, 1083–1107 (2009).10.1179/174328409X453253 ↗
9. T. Gladman, The Physical Metallurgy of Microalloyed Steels, Money Publishing, London (1997), p. 240.
10. A. Pandit, A. Murugaiyan, A. S. Podder, et al., “Strain induced precipitation of complex carbonitrides in Nb–V and Ti–V microalloyed steels,” Scripta Mater., 53, No. 11, 1309–1314 (2005).10.1016/j.scriptamat.2005.07.003 ↗
11. F. Velesco, M. A. Martinez, R. Calabres, et al., “Friction of PM ferritic stainless steels at temperatures up to 300°C,” Tribology Inter., 42, No. 8, 1199–1205 (2009).10.1016/j.triboint.2009.04.017 ↗
12. G. J. Kipouros, W. F. Caley, and D. P. Bishop, “On the advantages of using powder metallurgy in new light metal alloy design,” Fourth International Alloy Conference (IAC), Metall. Mater. Trans. A, 37, No. 12, 3429–3436 (2006).10.1007/s11661-006-1037-3 ↗
13. X. Dai-Hong, Y. Tie-Chui, O. Xiao-Qin, and H. Yue-Hui, “Microstructure and mechanical properties of powder metallurgy Ti–Al–Mo–V–Ag alloy,” Trans. Nonferrous Met. Soc. China, 21, No. 6, 1269–1276 (2011).10.1016/S1003-6326(11)60852-2 ↗
14. F. George and V. Voort, “Grain size measurement,” in: Practical Applications of Quantitative Metallography, ASTM Special Technical Publication 839, Philadelphia, PA (1994) p. 193.
15. J. R. Blank and T. Gladman, “Quantitative metallography,” in: Tools and Technique in Physical Metallurgy, New York (1970), pp. 265–327.
16. R. T. DeHoff and F. N. Rhines, Quantitative Microscopy, McGraw-Hill, Inc., USA (1968), p. 422.
17. E. R. Weibel, Stereological Methods, Academic Press, London (1979), p. 415.
18. T. Gladman and J. Woodhead, “The accuracy of point counting in metallographic investigation”, J. Iron Steel Inst., 194, 189–193 (1960).
19. R. M. Poths, R. L. Higginson, and E. J. Palmiere, “Complex precipitation behavior in a microalloyed plate steel,” Scripta Mater., 44, No. 1, 147–151 (2001).10.1016/S1359-6462(00)00617-5 ↗
20. S. S. Campos, H. J. Kestenbach, and E. V. Morales, “On strengthening mechanisms in commercial Nb-Ti hot strip steels,” Metall. Mater. Trans. A, 32, No. 5, 1245–1248 (2001).10.1007/s11661-001-0133-7 ↗
21. R. D. K. Misra, K. K. Tenneti, G. C. Weatherly, and G. Tither, “Microstructure and texture of hot rolled Cb–Ti and V–Cb microalloyed steels with differences in formability and toughness,” Metall. Mater. Trans. A, 34, No. 10, 2341–2351 (2003).10.1007/s11661-003-0297-4 ↗
22. B. Dutta and C. M. Sellars, “Strengthening of austenite by niobium during hot rolling of microalloyed steel,” Mater. Sci. Technol., 2, No. 2, 146–153 (1986).10.1179/mst.1986.2.2.146 ↗
23. J. G. Jung, J. S. Park, J. Kim, and Y. K. Lee, “Carbide precipitation kinetics in austenite of a Nb–Ti–V microalloyed steel,” Mater. Sci. Eng. A, 528, Nos. 16–17, 5529–5535 (2011).10.1016/j.msea.2011.03.086 ↗
24. C. Cui, Z. Guo, H. Wang, and J. Hu, “In situ TiC particles reinforced grey cast iron composite fabricated by laser cladding of Ni–Ti–C system,” J. Mater. Proc. Tech., 183, Nos. 2–3, 380–385 (2007).10.1016/j.jmatprotec.2006.10.031 ↗
25. A. Emamian, S. F. Corbin, and A. Khajepour, “Correlation between temperature distribution and in-situ formed microstructure of Fe–TiC deposited on carbon steel using laser cladding,” Appl. Surf. Sci., 258, No. 22, 9025–9031 (2012).10.1016/j.apsusc.2012.05.143 ↗
26. A. M. Sage, “An overview of the use of microalloys in HSLA steels with particular reference to vanadium and titanium,” in: HSLA Steels: Processing Properties and Applications, Minerals, Metals and Materials Society Warrendale, PA (1992), pp. 51–60.
27. H. Karabulut and S. Gündüz, “Effect of vanadium content on dynamic strain ageing in microalloyed medium carbon steel,” Mater. Des., 25, No. 6, 521–527 (2004).10.1016/j.matdes.2004.01.005 ↗
28. S. Qing-Yun, L. Gui-Yan, Q. Li-Feng, and Y. Ping-Yuan, “Effect of cooling rate and coiling temperature on precipitate in ferrite of a Nb–V–Ti microalloyed strip steel,” J. Iron Steel Resear., Int., 14, No. 5, Suppl. 1, 316–319 (2007).
29. M. Jahazi and B. Eghbali, “The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels,” J. Mater. Proc. Tech., 113, Nos. 1–3, 594–598 (2001).10.1016/S0924-0136(01)00599-4 ↗
30. D. T. Llewellyn and R. C. Hudd, Steels: Metallurgy and Applications, Reed Educational and Professional Publishing Ltd, Oxford (1998), p. 389.
31. L. C. Cuddy and J. C. Raley, “Austenite grain coarsening in microalloyed steels,” Metall. Trans. A, 14, No. 10, 1989–1995 (1983).10.1007/BF02662366 ↗
32. K. Narita, “Physical chemistry of the groups IVa (Ti, Zr), Va (V,Nb, Ta) and the rare earth elements in steels,” Transact. ISIJ, 15, No. 3, 145–152 (1975).
33. Z. Jia, R. D. K. Misra, R. O. Malley, and S. J. Jansto, “Fine-scale precipitation and mechanical properties of thin slab processed titanium–niobium bearing high strength steels,” Mater. Sci. Eng. A, 528, Nos. 22–23, 7077–7083 (2011).10.1016/j.msea.2011.05.073 ↗
34. S. K. Mishra, S. Das, and S. Ranganathan, “Precipitation in high strength low alloy (HSLA) steel: a TEM study,” Mater. Sci. Eng. A, 323, Nos. 1–2, 285–292 (2002).
35. H. Najafi, J. Rassizadehghani, and A. Halvaaee, “Mechanical properties of cast microalloyed steels containing V, Nb, and Ti,” Mater. Sci. Tech., 23, No. 6, 699–705 (2007).10.1179/174328407X179755 ↗
36. X. Guang, G. Xiaolong, M. Guojun, L. Feng, and Z. Hang, “The development of Ti-alloyed high strength microalloy steel,” Mater. Des., 31, No. 6, 2891–2896 (2010).10.1016/j.matdes.2009.12.032 ↗
37. F. B. Pickering and T. Gladman, “Metallurgical developments in carbon steels,” ISI Special Report No: 81, London, 10–20 (1963).
38. M. A. Erden, S. Gündüz, M. Türkmen, and H. Karabulut, “Microstructural characterization and mechanical properties of microalloyed powder metallurgy steels,” Mater. Sci. Eng. A, 616, 201–206 (2014).10.1016/j.msea.2014.08.026 ↗
39. D. Sharma, K. Chandra, and P. S. Misra, “Design and development of powder processed Fe–P based alloys,” Mater Des., 32, No. 6, 198–204 (2011).10.1016/j.matdes.2011.02.046 ↗
40. V. S. Warke, Jr. R. D. Sisson, and R. D. Makhlouf, “The effect of porosity on the austenite to ferrite transformation in powder metallurgy steels,” Mater. Sci. Eng. A, 528, Nos. 10–11, 3533–3538 (2011).
41. D. Wilbert, W. Ángel, L. T. Jurado, et al., “Effect of copper on the mechanical properties of alloys formed by powder metallurgy,” Mater. Des., 58, 12–18 (2012).
42. A. Bergmark and L. Alzati, “Fatigue crack path in Cu–Ni–Mo alloyed PM steel”, Fatigue Fract. Eng. Mater. Struct., 28, Nos. 1–2, 229–235 (2005).10.1111/j.1460-2695.2004.00841.x ↗
43. W. Roberts, A. Sandberg, T. Siwecki, and T. Werlefors, in: HSLA Steels: Technology and Applications, ASM, Metals Park, OH (1984), p. 67.
44. E. Dudrová and M. Kabátová, “Fractography of sintered iron and steels,” Powder Metall. Prog., 8, No. 2, 59–75 (2008).
45. T. Murphy, B. Lindsley, and C. Schade, “Effect of pearlite spacing and chemical composition on the axialfatigue behavior of fully pearlitic PM steels: A metallographic study,” Inter. J. Powder Metall., 48, No. 5, 23–39 (2012).