journal article·2014-03

Effect of Hot Recompaction Parameters on the Structure and Properties of Diamond–(Fe–Cu–Ni–Sn–CrB2) Composites

V. A. Mechnik

Powder Metallurgy and Metal Ceramics· Volume 52· Issue 11-12
Publisher page

Abstract

The paper explains the mechanisms whereby components in the diamond–(Fe–Cu–Ni–Sn–CrB2) system and products of their interaction influence the micro- and nanostructure as well as mechanical properties of the composites sintered in molds in a muffle furnace followed by hot recompaction. The p–t parameters of hot recompaction that provide decarburization in the diamond–matrix transition zone by forming Fe3C, Cr3C2, Cr7C3, and Cr1.65Fe0.35B0.96 layers are determined. The wear resistance of these composites is three times as high as that of the samples produced from feedstock without chromium diboride.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Tunneling and Rock Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. N. V. Novikov (ed.), N. A. Bondarenko, A. N. Zhukovskii, and V. A. Mechnik, Basis for Developing Diamond Composites for Rock Cutting Tools [in Russian], Inst. Sverkhtverd. Mater., NAN Ukrainy, Kiev (2008), p. 456.
2. Yu. M. Semenov, É. D. Kizikov, and E. K. Bondarev, Binder for Diamond Tools [in Russian], USSR Inventor’s Certificate 357073, IPC3 B24d3/06; appl. May 25, 1970; Bulletin No. 33, publ. October 31 (1972), p. 4.
3. É. É. Mitrova, E. B. Vernik, V. N. Galitskii, et al., Metal Binder for Abrasive Tools [in Russian], USSR Inventor’s Certificate 339393, IPC3 B24d3/05; appl. August 12, 1970; Bulletin No. 17, publ. May 24 (1972), p. 3.
4. Hyun Sam Che, Method of Receipt for Polycrystalline, Pressed in Form of a ‘Sandwich’, Materials, Request 2639633 France; decl. October 30, 1988, General Electric Company, USA; publ. June 1 (1990), p. 6.3
5. V. N. Galitskii, A. V. Kirishchuk, S. I. Lishchinskii, et al., Metal Binder for Diamond Tools [in Russian], USSR Inventor’s Certificate 985111, IPC3 C22C9/16, B24d3/06; appl. December 16, 1980; Bulletin No. 48, publ. December 30 (1982), p. 4.
6. N. Ramakrishnan, “An analytical study on strengthening of particulate reinforced metal matrix composites,” Acta Mater., 44, 69–77 (1996).10.1016/1359-6454(95)00150-9 ↗
7. M. O. Bondarenko, V. A. Mechnik, O. M. Zhukovskii, et al., Charge for Making Abrasive Material [in Ukrainian], Ukrainian Patent 64274, IPC B24D3/04, B22F3/12, E21B10/46, C22C29/14; appl. February 24, 2003, Inst. Sverkhtverd. Mater. NAN Ukrainy; Bulletin No. 12, publ. December 15 (2005), p. 5.
8. E. A. Levashov, V. A. Andreev, and V. V. Kurbatkina, Binder for Fabrication of Diamond Tools [in Russian], Russian Federation Patent 2286242, IPC B24D3/06; appl. November 14, 2005; publ. October 27 (2006), p. 3.
9. Z. Mickiewicz and M. Skiers, “Tin influence on diamond–metal hot pressed tools for stone cutting,” J. Mater. Process. Technol., 175, No. 1–3, 306–315 (2006).
10. E. A. Levashov, V. F. Andreev, and V. V. Kurbatkina, Binder for the Fabrication of Diamond Tool, US Patent 2009107291, B22F1/00; publ. April 30 (2009), p. 5.
11. M. O. Bondarenko, A. F. Lisovskii, and V. A. Mechnik, Superhard Composite Material [in Ukrainian], Ukrainian Patent 63989, IPC B24D3/04, B24D3/06; appl. April 4, 2011, Inst. Sverkhtverd. Mater. NAN Ukrainy; Bulletin No. 20, publ. October 25 (2011), p. 4.
12. V. R. Howes, “The graphitization of diamond,” Proc. Phys., 80, No. 3, 648–662 (1962).10.1088/0370-1328/80/3/310 ↗
13. M. Seal, “The effect of surface orientation on the graphitization of diamond,” Phys. Stat. Sol., 3, No. 4, 658–664 (1963).10.1002/pssb.19630030408 ↗
14. M. O. Bondarenko and V. A. Mechnik, “Effect of hot recompaction parameters on the structure and properties of diamond–Fe–Cu–Ni–Sn composites for rock cutting tools,” Nauk. Prats. DonNTU. Ser. Girn. Geol., 181, Issue 14, 143–149 (2011).
15. N. V. Novikov, N. A. Bondarenko, V. A. Mechnik, et al., “Physical and mathematical modelling of sintering of multicomponent diamond-bearing composites. 1. Mathematical model,” Fiz. Mezomekh., 7, No. 3, 71–77 (2004).
16. N. V. Novikov. N. A. Bondarenko, O. G. Kulik, et al., “Physical and mathematical modelling of sintering of multicomponent diamond-bearing composites. 2. Physical and chemical features of structure and properties,” Fiz. Mezomekh., 7, No. 3, 79–87 (2004).
17. M. O. Bondarenko, V. A. Mechnik, and M. V. Suprun, “Effect of sintering conditions on shrinkage kinetics and mechanical properties of diamond–(Fe–Cu–Ni–Sn) inserts,” Rozv. Rozrob. Naft. Gas. Rodov., 32, No. 3, 18–22 (2009).
18. Z. Zhang and D. L. Chen, “Consideration of Orovan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength,” Scripta Mater., 54, No. 7, 1321–1326 (2006).10.1016/j.scriptamat.2005.12.017 ↗
19. V. A. Mechnik, “Energy aspects of structural improvement of superhard materials. Diamond–(Fe + Cu + Ni + Sn) system,” Probl. Mashinostr., 10, No. 3, 87–93 (2007).
20. V. A. Mechnik, “Energy aspects of structural improvement of superhard materials. Diamond–(Fe + Cu + Ni + Sn + CrB2) system,” Probl. Mashinostr., 10, No. 4, 92–98 (2007).
21. M. O. Bondarenko, V. A. Mechnik, and M. V. Suprun, “Shrinkage and its rate in the Cdiamond–Fe–Cu–Ni–Sn–CrB2 system during hot pressing of samples produced by pressureless sintering,” Sverkhtverd. Mater., No. 4, 29–39 (2009).
22. M. O. Bondarenko, V. A. Mechnik, and M. V. Suprun, “Effect of pressure on the structure and properties of rock cutting ‘diamond–Fe–Cu–Ni–Sn–CrB2’ elements,” Nauk. Visn. Ivan. Frankiv. Univ. Naft. Gaz., 3, No. 21, 79–84 (2009).
23. M. O. Bondarenko, V. A. Mechnik, M. V. Suprun, et al.., “Strengthening of diamond-bearing systems with interacting components for rock cutting tools,” Nauk. Visn. Nats. Derzh. Univ., No. 10, 16–20 (2009).
24. M. O. Bondarenko, V. A. Mechnik, M. V. Suprun, et al., “Solid-phase and liquid-phase sintering of diamond-bearing materials for rock cutting tools,” Nauk. Visn. Nats. Derzh. Univ., No. 11, 6–12 (2009).
25. M. O. Bondarenko, V. A. Mechnik, M. V. Suprun, et al., “Effect of diamond concentration on shrinkage kinetics in the Fe–Cu–Ni–Sn–CrB2 system during hot pressing,” Nauk. Prats. DonNTU. Ser. Girn. Geol., 11, No. 161, 69–74 (2010).
26. E. Levashov, V. Kurbatkina, and A. Zaytsev, “Improved mechanical and tribological properties of metalmatrix composites dispersion-strengthened by nanoparticles,” Materials, No. 3, 97–109 (2010).10.3390/ma3010097 ↗
27. V. A. Mechnik, “Diamond–Fe–Cu–Ni–Sn composite materials with predicted stable characteristics,” Fiz. Khim. Mekh. Mater., No. 5, 34–42 (2012).
28. V. V. Skorokhod, Rheological Fundamentals of Sintering Theory [in Russian], Naukova Dumka, Kiev (1972), p. 151.
29. V. V. Skorokhod, Yu. M. Solonin, and I. V. Uvarova, Chemical, Diffusion, and Rheological Processes in Powder Metallurgy [in Russian], Naukova Dumka, Kiev (1990), p. 248.
30. V. V. Skorokhod and A. V. Ragulya, “Anomalous diffusional mass transport in the initial stage of the sintering of powders,” Powder Metall. Met. Ceram., 31, No. 12, 1006‒1009 (1992).10.1007/BF00797757 ↗
31. V. V. Skorokhod and A. V. Ragulya, “Sintering at a controlled rate as a method for regulating the microstructure of ceramics and similar sintered materials,” Powder Metall. Met. Ceram., 33, No. 3–4, 109–117 (1995).10.1007/BF00559765 ↗
32. V. V. Skorokhod, “Challenges in the production and study of the structure and properties of nanocrystalline materials,” in: Nanocrystalline Materials [in Russian], Inst. Probl. Materialoved. NAN Ukrainy, Kiev (1998), pp. 4–15.
33. H. Gleiter, “Nanostructure materials: basic concepts and microstructure,” Acta Mater., 48, No. 1, 1–29 (2000).10.1016/S1359-6454(99)00285-2 ↗
34. V. V. Skorokhod, I. V. Uvarova, and A. V. Ragulya, Physicochemical Kinetics in Nanostructured Systems [in Ukrainian], Akademperiodika, Kiev (2001), p. 180.
35. R. A. Andrievskii, “Nanomaterials: concept and current challenges,” Ros. Khim. Zh., 46, No. 5, 50–56 (2002).
36. V. V. Skorokhod and A. V. Ragulya, “Nanostructured ceramics and nanocomposites: advances and prospects,” in: Advanced Materials and Technologies [in Ukrainian], 2 Vols., Akademperiodika, Kiev (2003), Vol. 2, pp. 7–34.
37. M. S. Koval’chenko, “Strain hardening of a powder body in pressing,” Powder Metall. Met. Ceram., 48, No. 3–4, 133–144 (2009).10.1007/s11106-009-9118-7 ↗
38. M. S. Koval’chenko, “Pressure sintering of powder materials,” Powder Metall. Met. Ceram., 50, No. 1–2, 18–33 (2011).10.1007/s11106-011-9299-8 ↗
39. R. A. Andrievskii, “Research into sintering and related phenomena: personal experience,” Powder Metall. Met. Ceram., 50, No. 1–2, 2–17 (2011).10.1007/s11106-011-9298-9 ↗
40. V. A. Mechnik, “Production of diamond–(Fe–Cu–Ni–Sn) composites with high wear resistance,” Powder Metall. Met. Ceram., 52, No. 9–10, 577–587 (2013).
41. G. V. Samsonov and I. M. Vinnitskii (eds.), Refractory Compounds: Handbook [in Russian], Metallurgiya, Moscow (1976), p. 560.
42. W. Kraus and G. Nolze, “Powder Cell—a program for the representation and manipulation of crystal structures and calculation of the resulting X-ray powder patterns,” J. Appl. Cryst., 29, 301–303 (1996).10.1107/S0021889895014920 ↗
43. Powder Diffraction File 1974, Search Manual Alphabetical Listing and Search Section of Frequently Encountered Phases. Inorganic, Philadelphia (1974).