Electrode Materials for Composite and Multilayer Electrospark-Deposited Coatings from Ni–Cr and WC–Co Alloys and Metals
Source abstract
Abstract
The layer-by-layer electrospark deposition of Cu, In, Pb, Cd, and Sn group metals and Ti, V, and W metals, as well as their carbides and hardmetals of WC type, onto metallic surfaces is studied. This technique improves the quality and wear resistance of the surface layer compared to coatings without a sublayer. The sintered electrode materials containing 10–30 wt.% of the (Ni–Cr–Si–B)–WC6 alloy allow electrospark coatings with thickness up to 100 μm and microhardness 12.3–14.2 GPa to be formed. The wear resistance and service life of these coatings are substantially higher than of those made of standard hardmetal WC6. Among the Ni–Cr–Al alloys, the best effectiveness in worn-part recovery is shown by the alloy from the ternary eutectic region (50.3 wt.% Ni, 40.2 wt.% Cr, 9.5 wt.% Al), which may provide coating thickness up to 1.0 mm. The novel coating technique and proposed electrode materials increase the resistance of cutting tools and life of equipment parts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Coatings · Engineering Technology and Methodologies · Advanced Theoretical and Applied Studies in Material Sciences and Geometry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. R. J. Wang, Y. Y. Qian, and J. Liu, “Structural and interfacial analysis of WC92–Co8 coating deposited on titanium alloy by electrospark deposition,” Appl. Surf. Sci., 228, No. 4. – P. 405–409. 2004.10.1016/j.apsusc.2004.01.043 ↗
2. Yu. G. Tkachenko, D. Z. Yurchenko, V. F. Britun, et al., “Structure and properties of wear-resistant spark-deposited coatings produced with a titanium carbide alloy anode,” Powder Metall. Met. Ceram., 52, No. 5–6, 306–313 (2013).10.1007/s11106-013-9527-5 ↗
3. V. N. Gadalov, Yu. V. Boldyrev, and E. V. Ivanova, “Wear- and corrosion-resistant spark-deposited eutectic alloy coatings on steel 30KhGSA,” Uprochn. Tekhnol. Pokryt., No. 1, 22–25 (2006).
4. A. V. Paustovskii, Yu. G. Tkachenko, R. A. Alfintseva, et al., “Optimization of the composition, structure, and properties of electrode materials and spark-deposited coatings for strengthening and recovery of metallic surfaces,” Électron. Obrab. Mater., 49, No. 1, 4–13 (2013).
5. M. S. Koval’chenko, Yu. G. Tkachenko, V. F. Britun, et al., “Structure, mechanical and erosive properties of AlN–MoSi2 composite materials and their electrospark-deposited coatings,” Powder Metall. Met. Ceram., 47, No. 3–4, 183–190 (2008).10.1007/s11106-008-9003-9 ↗
6. I. A. Podchernyaeva, D. V. Yurechko, and A. D. Panasyuk, “Mass transfer and adhesion in electrospark alloying of AL9 alloy with AlN–Ti(Zr)B2–Ti(Zr)Si2 ceramic electrodes,” Powder Metall. Met. Ceram.,. 43, No. 9–10, 473–479 (2004).10.1007/s11106-005-0008-3 ↗
7. Z. Chen and Y. Zhou, “Surface modification of resistance welding electrode by electro-spark deposited composite coatings. Part I: Coating characterization,” Surf. Coat. Technol., 201, No. 3–4, 1503–1510 (2006).10.1016/j.surfcoat.2006.02.015 ↗
8. I. A. Podchernyaeva, V. M. Panashenko, A. I. Dukhota, et al., “Formation and tribological behavior of multilayer wear-resistant ZrB2-containing spark-deposited and spark-laser coatings on titanium alloy,” Probl. Tribol., No. 4, 96–101 (2012).
9. A. V. Paustovskii, Yu. G. Tkachenko, R. A. Alfintseva, et al., “Development of electrode materials for electrospark deposition and recovery of worn surfaces and structure and properties of coatings,” Électron. Obrab. Mater., 47, No. 2, 30–36 (2011).
10. A. N. Smirnov, V. K. Knyaz’kov, M. V. Radchenko, et al., “Effect of nanosized Al2O3 particles on structural and phase composition of Ni–Cr–B–Si–Fe/WC coatings produced by plasma powder welding,” Svarka Diagnos., No. 5, 32–37 (2012).
11. A. D. Pogrebnyak, S. N. Bratushka, V. V. Uglov, et al., “Structure and properties of Ni–Cr–B–Si–Fe/WC–Co coatings deposited on steel and copper substrates,” Fiz. Inzhen. Poverkhn., 6, No. 1–2, 92–97 (2008).
12. L. A. Ivanov and G. P. Parkhomenko, “Sintered coatings for parts operating under erosive wear conditions,” Powder Metall. Met. Ceram., 13, No. 2, 160–163 (1974).10.1007/BF00791351 ↗
13. V. B. Tarel’nik, “Improvement in the service properties of surface iron layers by application of composite electrospark coatings,” Électron. Obrab. Mater., No. 4, 61–62 (1995).
14. V. B. Tarel’nik, Quality Control of Surface Layers Applying Combined Electrospark Deposition [in Russian], McDen, Sumy (2002), p. 323.
15. A. E. Gitlevich, V. V. Mikhailov, N. Ya. Parkanskii, and V. M. Revutskii, Electrospark Deposition of Metallic Surfaces [in Russian], Shtiintsa, Kishinev (1985), p. 196.
16. V. M. Leshchinskii and V. B. Tarel’nik, “Application of composite electrospark coatings with further plastic surface working,” Khim. Neft. Mashinostr., No. 3, 71–72 (1996).