Effects of processing parameters on the temperature field of selective laser melting metal powder
Source abstract
Abstract
Based on temperature-dependent thermophysical parameters and nonlinear phase transformation from powder to liquid, a three-dimensional transient thermal finite model of selective laser melting process is developed. Commercial ANSYS software is used to simulate the distribution of the temperature field in selective laser melting. The simulation results show that a lower scan speed, higher laser power, and a lower scan interval enable much higher maximum temperature in the powder bed and wider scan track width. The scan modes also have great influence on the temperature field. Temperature in the powder bed experiences fluctuant variation with transverse scan mode in contrast with moderate variation with lengthwise scan mode. The simulated results are compared with the experimental results and good agreement is found in scan track width.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Surface Roughness and Optical Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. E. C. Santos, M. Shiomi, K. Osakada, and T. Laoui, “Rapid manufacturing of metal components by laser forming,” Int. J. Mach. Tools Manuf., 46, No. 10, 1459–1468 (2006).10.1016/j.ijmachtools.2005.09.005 ↗
2. K. Osakada and M. Shiomi, “Flexible manufacturing of metallic products by selective laser melting of powder,” Int. J. Mach. Tools Manuf., 46, No. 11, 1188–1193 (2006).10.1016/j.ijmachtools.2006.01.024 ↗
3. A. Simchi, “Direct laser sintering of metal powders: Mechanism, kinetics, and microstructural features,” Mater. Sci. Eng. A, 428, No. 1, 148–158 (2006).10.1016/j.msea.2006.04.117 ↗
4. G. Buqeda, M. Cervera, and G. Lombera, “Numerical prediction of temperature and density distributions in selective laser sintering processes,” Rapid Prototyping J., 5, No. 1, 21–26 (1999).10.1108/13552549910251846 ↗
5. X. C. Wang, T. Laoui, J. Bonse, et. al., “Direct selective laser sintering of hard metal powders: experimental study and simulation,” Int. J. Adv. Manuf. Tech., 19, 351–357 (2002).10.1007/s001700200024 ↗
6. M. Labudivic, D. Hu, and R. Kovacevic, “A three-dimensional model for direct laser metal powder deposition and rapid prototyping,” J. Mater. Sci., 38, No. 1, 35–49 (2003).10.1023/A:1021153513925 ↗
7. M. Matsumoto, M. Shiomi, K. Osakada, and F. Abe, “Finite-element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing,” Int. J. Mach. Tools Manuf., 42, No. 1, 61–67 (2002).10.1016/S0890-6955(01)00093-1 ↗
8. S. Kolossov, E. Boillat, R. Glardon, et al., “3D FE simulation for temperature evolution in the selective laser sintering process,” Int. J. Mach. Tools Manuf., 44, No. 2, 117–123 (2004).10.1016/j.ijmachtools.2003.10.019 ↗
9. T. H. C. Childs, C. Hauser, and M. Badrossamay, “Selective laser sintering (melting) of stainless and tool steel powders: Experiments and modeling,” P. I. Mech. Eng. B-J. Eng., 219, No. 4, 339–357 (2005).
10. R. B. Patil and V. Yadava, “Finite element analysis of temperature distribution in single metallic powder layer during metal laser sintering,” Int. J. Mach. Tools. Manuf., 47, No. 7, 1069–1080 (2007).10.1016/j.ijmachtools.2006.09.025 ↗
11. L. Ma and H. Bin, “Temperature and stress analysis and simulation in fractal scanning-based laser sintering,” Int. J. Adv. Manuf. Tech., 3(49), 898–903 (2007).10.1007/s00170-006-0665-5 ↗
12. A. V. Gusarov, I. Yadroitsev, P. Bertrand, and I. Smurov, “Heat transfer modeling and stability analysis of selective laser melting,” Appl. Surf. Sci., 254, No. 4, 975–979 (2007).10.1016/j.apsusc.2007.08.074 ↗
13. T. B. Chen and Y. W. Zhang, “Thermal modeling of laser sintering of two-component metal powder on top of sintered layers via multi-line,” Appl. Phys. A, 86, No. 2, 213–220 (2007).10.1007/s00339-006-3739-1 ↗
14. L. Dong, A. Makradi, S. Ahzi, and Y. Remond, “Three-dimensional transient finite-element analysis of the selective laser sintering process,” J. Mater. Process. Tech., [doi: 10.1016/j.jmatprotec . 2008.02.040].
15. S. S. Sih and J. W. Barlow, “The prediction of the thermal conductivity of powders [A],” in: Proc. 6 th Annual SFF Symp., University of Texas at Austin, Austin (1995), pp. 397–401.
16. W. X. Zhang, Y. S. Shi, J. H. Liu, et al., “Type HRPM machine for selective laser melting process,” in: Proc. 3rd Int. Conf. on Advanced Research in Virtual and Rapid Prototyping (Leiria, Portugal, September 24–29, 2007), Leiria (2007), pp. 541–544.