journal article·2002-07

Synthesis of Alloy Ti ― 6Al ― 4V with Low Residual Porosity by a Powder Metallurgy Method

Orest M. Ivasishin, Dmitrii G. Savvakin, Francis H. Froes, Kseniya A. Bondareva

Powder Metallurgy and Metal Ceramics· Volume 41· Issue 7-8
Publisher page

Abstract

The possibility of producing titanium alloy Ti ― 6Al ― 4V with minimal residual porosity from mixtures of elemental powders by the method of pressing and sintering without hot deformation during or after sintering was investigated. Various powder mixtures based on titanium and titanium hydride with alloying additions of either elemental powders having different particle sizes, or master alloys, were studied. It was shown that the synthesis of Ti ― 6Al ― 4V from mixtures of titanium hydride and master alloys is optimal with respect to the attainment of high relative density. In this case the sintered material has density up to 99%, homogeneous microstructure with relatively small (100-120 μm) β-phase grains, and a low concentration of impurities, in particular oxygen, which provide a high level of mechanical properties σ(ten = 970 MPa, δ = 6%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Surface Treatment and Coatings · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. F. H. Froes and D. Eylon, “Powder metallurgy of titanium alloys: Review,” in: Titanium Technology: Present Status and Future Trends, F. H. Froes, D. Eylon, and H. B. Bomberger (eds.), Titanium Development Assn., Dayton (1985), pp. 49–59.
2. S. Abkowits and D. Rowell, “Superior fatigue properties for blended elemental P/M Ti - 6Al - 4V,” J. Metals, August, 36–39 (1986).10.1007/BF03257786 ↗
3. M. Hagivara, Y. Kaieda, Y. Kawabe, and S. Miura, “Property enhancement of a-ß? titanium alloys by blended elemental P/M method,” Titanium '92. Science and Technology: Proc. of 7 th World Conference on Titanium (San Diego, June 29-July 2, 1992), F. H. Froes and I. L. Caplan (eds.), TMS, Warrendale (1993), pp. 887–894.
4. H. Fujii, K. Takahashi, K. Fujisawa, et al., “Low cost process of blended elemental powder metallurgy,” Titanium '95, Science and Technology, Proc. 8 th World Conf. on Titanium(Birmingham, 22–26 October, 1995), P. A. Blenkinsop, W. J. Evans, and E. M. Flower (eds.), Cambridge University Press (1996), pp. 2547–2554.
5. M. Dahms, G. Leitner, W. Poessnecker, et al., “Pore formation during reactive sintering of extruded titanium-aluminum powder mixtures,” Z. Metallk. 84, No. 5, 351–357 (1993).
6. A. Bohm and B. Kieback, “Investigation of swelling behavior of Ti-Al elemental powder mixtures during reaction sintering,” Z. Metallk. 89, No. 2, 90–95 (1998).
7. O. M. Ivasishin, V. M. Anokhin, A. N. Demidik, and D. G. Savvakin, “Microstructural features of titanium alloys manufactured by elemental powder metallurgy,” Materials Development and Processing: Proc. EUROMAT'99(Munich, September 1999), L. Schultz, D. M. Herlach, and J. V. Wood (eds.), Wiley-VCH (2000), Vol. 8, pp. 345–350.10.1002/3527607277.ch56 ↗
8. O. M. Ivasishin, V. M. Anokhin, A. N. Demidik, and D. G. Savvakin, “Cost-effected blended elemental powder metallurgy of titanium alloys for transportation application,” Key Eng. Mat., 188, 55–62 (2000).10.4028/www.scientific.net/KEM.188.55 ↗
9. B. A. Kolachev, A. A. Il'yin, V. A. Lavrenko, and Yu. V. Levinskii, Hydride Systems: Handbook[in Russian], Metallurgiya, Moscow (1992).
10. O. M. Ivasishin, A. N. Demidik, and D. G. Sawakin, “Phase transformations on synthesis of titanium aluminides from TiH2 and Al powders,” Titanium '95, Science and Technology: Proc. 8 th World Conf. on Titanium(Birmingham, 22–26 October, 1995), P. A. Blenkinsop, W. J. Evans, and H. M. Flower (eds.), University Press, Cambridge (1996), pp. 440–447.
11. O. M. Ivasishin, A. N. Demidik, and D. G. Savvakin, “Use of titanium hydride for the synthesis of titanium aluminides from powder materials,” Poroshk. Metall.Nos. 9–10, 63–70 (1999).
12. P. J. Andersen, “Sintered powder titanium alloy and method of producing same,” Pat. 4432795, USAPubl. February 21 (1982).
13. C. F. Yolton and L. M. Osborn, “Tensile and fracture toughness properties of P/M Ti - 1.3Al - 8V - 5Fe and derivatives,” Titanium '92, Science and Technology: Proc. 7 th World Conference on Titanium(San Diego, June 29-July 2, 1992), F. H. Froes and I. L. Caplan (eds.), TMS, Warrendale (1993), pp. 821–828.
14. F. H. Froes, C. M. Cooke, et al., “Grain growth in blended elemental Ti - 6Al - 4V powder compacts,” Proc. 6 th World Conf. on Titanium(Cannes, 6–9 June, 1988), P. Lacombe, R. Tricot, and G. Beranger (eds.), Les Editions de Physique, Paris (1989), pp. 1161–1166.