Thermal Barrier Coatings: Current Status, Search, and Analysis
Source abstract
Abstract
The principles for selecting materials to be used as thermal barrier coatings (TBCs) are presented. The advantages and disadvantages of new methods for TBC deposition are briefly described. After measurement of the thermal conductivity and thermal expansion coefficient, it is required to ascertain that such materials do not interact with the thermally grown aluminum oxide and then to determine their strength, fracture toughness, hardness, and Young’s modulus. The thermal conductivity of TBC can be reduced by increasing its porosity and suppressing its sintering. The need for and drawbacks of multilayer coatings are shown. If TBC meets all the requirements, then TBC corrosion resistance to Na2SO4, V2O5, P2O5, sand, and volcanic ash in operation and ways to protect TBC against damage need to be determined. The prospects and areas for development of these techniques are outlined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. R. A. Miller, “Current status of thermal barrier coating: an overview,” Surf. Coat. Technol., 30, 1−11 (1987).10.1016/0257-8972(87)90003-X ↗
2. D. R. Clarke and S. R. Phillpot, “Thermal barrier coating materials,” Mater. Today, 22−29 (2005).10.1016/S1369-7021(05)70934-2 ↗
3. V. Kumar and B. Kandasubramanian, “Processing and design methodologies for advanced and novel thermal barrier coatings for engineering application,” Particuology, 27, 1−29 (2016).10.1016/j.partic.2016.01.007 ↗
4. X. Q. Cao, R. Vassen, and D. Stoever, “Ceramic materials for thermal barrier coatings,” J. Eur. Ceram. Soc., 24, 1−10 (2004).10.1016/S0955-2219(03)00129-8 ↗
5. D. Zhu, Y. L. Chen, and R. A. Miller, “Defect clustering and nano-phase structure characterization of multi-component rare earth oxide doped zirconia-yttria thermal barrier coatings,” Ceram. Eng. Sci. Proc., 24, 525–534 (2003).10.1002/9780470294802.ch75 ↗
6. C. G. Levi, “Emerging materials and processes for thermal barrier systems,” Curr. Opin. Solid State Mater. Sci., 8, No. 1, 77–91 (2004).10.1016/j.cossms.2004.03.009 ↗
7. J. R. Nicholls, K. J. Lawson, A. Johnstone, and D. S. Rickerby, “Methods to reduce the thermal conductivity of EB−PVD TBCs,” Surf. Coat. Technol., 151–152, 383–391 (2002).10.1016/S0257-8972(01)01651-6 ↗
8. D. Zhu and R. A. Miller, “Thermal conductivity and sintering behavior of advanced thermal barrier coatings,” Ceram. Eng. Sci. Proc., 23, 457–468 (2002).10.1002/9780470294758.ch51 ↗
9. R. Vassen, X. Cao, F. Tietz, et al., “Zirconates as new materials for thermal barrier coatings,” J. Am. Ceram. Soc., 83, 2023–2028 (2000).10.1111/j.1151-2916.2000.tb01506.x ↗
10. J. Wu, X. Wei, N. P. Padture, et al., “Low-thermal-conductivity rare-earth zirconates for potential thermal barrier coating applications,” J. Am. Ceram. Soc., 85, 3031 (2002).10.1111/j.1151-2916.2002.tb00574.x ↗
11. Q. L. Li, X. Zh. Cui, S. Q. Li, et al., “Synthesis and phase stability of scandia, gadolinia, and ytterbia codoped zirconia for thermal barrier coating application,” J. Therm. Spray Technol., 24, 136–143 (2015).
12. K. Matsumoto, Y. Itoh, and Y. Ishiwata, “Thermal conductivity and sintering behavior of hafnia-based thermal barrier coating using EB-PVD,” in: Proc. Int. Gas Turb. Congress (Tokyo, 2003, Nov. 2–7), Tokyo (2003), pp. 1−6.
13. U. Schulz, B. Saruhan, K. Fritscher, and C. Leyens, “Review on advanced EB–PVD ceramic top coats for TBC applications,” Int. J. Appl. Ceram. Technol., 1, No. 4, 302–315 (2004).10.1111/j.1744-7402.2004.tb00182.x ↗
14. M. N. Rahaman, J. R. Gross, R. E. Dutton, and H. Wang, “Phase stability, sintering, and thermal conductivity of plasma-sprayed ZrO2–Gd2O3 compositions for potential thermal barrier coating applications,” Acta Mater., 54, 1615–1621 (2006).10.1016/j.actamat.2005.11.033 ↗
15. M. Matsumoto, H. Takayama, D. Yokoe, et al., “Thermal cycle behavior of plasma sprayed La2O3, Y2O3 stabilized ZrO2 coatings,” Scr. Mater., 54, 2035–2039 (2006).
16. Z.-G. Liu, J.-H. Ouyang, B.-H. Wang, et al., “Thermal expansion and thermal conductivity of Sm x Zr1–xO2–x/2 (0.1 ≤ x ≤ 0.5) ceramics,” Ceram. Int., 35, 791–796 (2009).10.1016/j.ceramint.2008.02.016 ↗
17. G. Di Girolamo, C. Blasi, M. Schioppa, and L. Tapfer, “Structure and thermal properties of heat treated plasma sprayed ceria–yttria co-stabilized zirconia coatings,” Ceram. Int., 85, 3031–3035 (2002).
18. X. Song, M. Xie, X. Hao, et al., “Structure and thermal conductivity of Zr1–xGd x O2–x/2 solid solutions,” J. Alloys Compd., 497, L5–L8 (2010).10.1016/j.jallcom.2010.02.185 ↗
19. H. Liu, S. Li, Q. Li, et al., “Microstructure, phase stability and thermal conductivity of plasma sprayed Yb2O3, Y2O3 co-stabilized ZrO2 coatings,” Solid State Sci., 13, 513–519 (2011).10.1016/j.solidstatesciences.2010.11.043 ↗
20. M. R. Loghman-Estarkia, R. S. Razavib, H. Edrisa, et al., “Life time of new SYSZ thermal barrier coatings produced by plasma spraying method under thermal shock test and high temperature treatment,” Ceram. Int., 40, 1404–1414 (2014).
21. L. Qu and K.-L. Choy, “Thermophysical and thermochemical properties of new thermal barrier materials based on Dy2O3–Y2O3 co-doped zirconia,” Ceram. Int., 40, 11593–11599 (2014).
22. R. Vaßen, F. Tietz, G. Kerkhoff, and D. Stöver, “New materials for advanced thermal barrier coatings,” in: J. Lecomte-Beckers, F. Schuber, and P. J. Ennis (eds.), Proc. 6th Liége Conf. Materials for Advanced Power Engineering (Forshungszentrum Jülich, Jülich, Germany, 1998), Jülich (1998), pp. 1627–1635.
23. J. Thornton and A. Majumdar, “Ceria precipitation and phase stability in zirconia based thermal barrier coatings,” in: A. Ohmori (ed.), Proc. 14th International Thermal Spray Conference: Thermal Spray–Current Status and Future Trends, ASM International, Materials Park, OH, USA (1995), pp. 1075–1080.
24. R. L. Jones, “Development of hot-corrosion-resistant zirconia thermal barrier coatings,” Mater. High Temp., 9, 228–236 (1991).10.1080/09603409.1991.11689664 ↗
25. R. L. Jones, “Some aspects of the hot corrosion of thermal barrier coatings,” J. Therm. Spray Technol., 6, No. 1, 77–84 (1997).10.1007/BF02646315 ↗
26. W. Ma and H. Dong, “Ceramic thermal barrier coating materials,” in: Thermal Barrier Coatings (2011), pp. 25−52.
27. P. Ramaswamy, S. Seetharamu, K. R. Varma, and K. J. Rao, “Thermal shock characteristics of plasma sprayed mullite coatings,” J. Therm. Spray Technol., 7, No. 4, 497–504 (1999).10.1361/105996398770350710 ↗
28. M. J. Maloney, Thermal Barrier Coating Systems and Materials, US Patent No. 6,117.560 (2000).
29. V. P. Red’ko, Physicochemical Study of M 4 Zr(Hf) 3 O 12 Compounds in the ZrO 2 (HfO 2 )–Rare Earth Oxide Systems [in Russian], Author’s Abstract of PhD Thesis, Kyiv (1990), p. 20.
30. W. Ma, Sh. Gong, Н. Xu, and X. Cao, “The thermal cycling behavior of lanthanum–cerium oxide thermal barrier coating prepared by EB–PVD,” Surf. Coat. Technol., 200, 5113–5118 (2006).
31. Q. Xu, W. Pan, J. Wang, et al., “Rare-earth zirconate ceramics with fluorite structure for thermal barrier coatings,” J. Am. Ceram. Soc., 89, No. 1, 340–342 (2006).10.1111/j.1551-2916.2005.00667.x ↗
32. L. Ling, X. Qiang, W. Fuchi, and Z. Hongsong, “Thermophysical properties of complex rare-earth zirconate ceramic for thermal barrier coatings,” J. Am. Ceram. Soc., 91, No. 7, 2398–2401 (2008).10.1111/j.1551-2916.2008.02433.x ↗
33. Z.-G. Liu, J.-H. Ouyang, Y. Zhou, and X.-L. Xia, “Electrical conductivity and thermal expansion of neodymium–ytterbium zirconate ceramics,” J. Power Sources, 195, 3261–3265 (2010).10.1016/j.jpowsour.2009.11.135 ↗
34. K. S. Lee, K. I. Jung, Y. S. Heo, et al., “Thermal and mechanical properties of sintered bodies and EBPVD layers of Y2O3 added Gd2Zr2O7 ceramics for thermal barrier coatings,” J. Alloys Compd., 507, 448–455 (2010).10.1016/j.jallcom.2010.07.196 ↗
35. Zh. Xu, L. He, X. Chen, et al., “Thermal cycling behavior of La2Zr2O7 coating with the addition of Y2O3 by EB-PVD,” J. Alloys Compd., 508, 85–93 (2010).10.1016/j.jallcom.2010.04.124 ↗
36. Ch. Wan, W. Zhang, Y. Wang, et al., “Glass-like thermal conductivity in ytterbium-doped lanthanum zirconate pyrochlore,” Acta Mater., 58, 6166–6172 (2010).10.1016/j.actamat.2010.07.035 ↗
37. B. Liu, J. Y. Wang, F. Z. Li, and Y. C. Zhou, “Theoretical elastic stiffness, structural stability, and thermal conductivity of La2T2O7 (T = Ge, Ti, Sn, Zr, Hf) pyrochlore,” Acta Mater., 58, 4369–4377 (2010).10.1016/j.actamat.2010.04.031 ↗
38. H. Chen, Y. Liu, Y. Gao, et al., “Design, preparation, and characterization of graded YSZ/La2Zr2O7 thermal barrier coatings,” J. Am. Ceram. Soc., 93, No. 6, 1732–1740 (2010).
39. H. Zhao, M. R. Begley, A. Heuer, et al., “Reaction, transformation and delamination of samarium zirconate thermal barrier coatings,” Surf. Coat. Technol., 205, 4355–4365 (2011).10.1016/j.surfcoat.2011.03.028 ↗
40. H. Zhang, S. Liao, X. Dang, et al., “Preparation and thermal conductivities of Gd2Ce2O7 and (Gd0.9Ca0.1)2Ce2O6.9 ceramics for thermal barrier coatings,” J. Alloys Compd., 509, 1226–1230 (2011).10.1016/j.jallcom.2010.09.196 ↗
41. Zh. Xu, Sh. He, L. He, et al., “Novel thermal barrier coatings based on La2(Zr0.7Ce0.3)2O7/8YSZ doubleceramic-layer systems deposited by electron beam physical vapor deposition,” J. Alloys Compd., 509, 4273–4283 (2011).10.1016/j.jallcom.2010.12.203 ↗
42. Ch. Wan, Zh. Qu, A. Du, and W. Pan, “Order–disorder transition and unconventional thermal conductivities of the (Sm1–xYb x )2Zr2O7 series,” J. Am. Ceram. Soc., 94, No. 2, 592–596 (2011).
43. L. Liu, F. Wang, Zh. Ma, et al., “Thermophysical properties of (Mg x La0.5xSm0.5)2(Zr0.7Ce0.3)2O7x (x = 0, 0.1, 0.2, 0.3) ceramic for thermal barrier coatings,” J. Am. Ceram. Soc., 94, No. 3, 675–678 (2011).
44. K.-H. Kwak, B.-Ch. Shim, S.-M. Lee, et al., “Formation and thermal properties of fluorite-pyrochlore composite structure in La2(Zr x Ce1–x)2O7 oxide system,” Mater. Lett., 65, 2937–2940 (2011).10.1016/j.matlet.2011.06.043 ↗
45. J. Feng, B. Xiao, C. L. Wan, et al., “Electronic structure, mechanical properties and thermal conductivity of Ln2Zr2O7 (Ln = La, Pr, Nd, Sm, Eu and Gd) pyrochlores,” Acta Mater., 59, 1742–1760 (2011).10.1016/j.actamat.2010.11.041 ↗
46. G. Moskal, L. Swadzba, M. Hetmanczyk, et al., “Characterization of microstructure and thermal properties of Gd2Zr2O7-type thermal barrier coating,” J. Eur. Ceram. Soc., 32, 2025–2034 (2012).10.1016/j.jeurceramsoc.2011.11.043 ↗
47. G. Moskal, L. Swadzba, M. Hetmanczyk, et al., “Characterization of the microstructure and thermal properties of Nd2Zr2O7 and Nd2Zr2O7/YSZ thermal barrier coatings,” J. Eur. Ceram. Soc., 32, 2035–2042 (2012).10.1016/j.jeurceramsoc.2011.12.004 ↗
48. Zh. Xu, L. He, R. Mu, et al., “Thermal cycling behavior of YSZ and La2(Zr0.7Ce0.3)2O7 as double-ceramiclayer systems EB-PVD TBCs,” J. Alloys Compd., 525, 87–96 (2012).
49. H.-S. Zhang, X.-G. Chen, G. Li, et al., “Influence of Gd2O3 addition on thermophysical properties of La2Ce2O7 ceramics for thermal barrier coatings,” J. Eur. Ceram. Soc., 32, 3693–3700 (2012).10.1016/j.jeurceramsoc.2012.06.003 ↗
50. M. Zhao, X. Ren, and W. Pan, “Mechanical and thermal properties of simultaneously substituted pyrochlore compounds (Ca2Nb2O7) x (Gd2Zr2O7)1–x,” J. Eur. Ceram. Soc., 35, 1055–1061 (2015).10.1016/j.jeurceramsoc.2014.10.009 ↗
51. A. Joulia, M. Vardelle, and S. Rossignol, “Synthesis and thermal stability of Re2Zr2O7 (Re = La, Gd) and La2(Zr1–xCe x )2O7–δ compounds under reducing and oxidant atmospheres for thermal barrier coatings,” J. Eur. Ceram. Soc., 33, 2633–2644 (2013).10.1016/j.jeurceramsoc.2013.03.030 ↗
52. H. Zhang, L. Guo, Y. Ma, et al., “Thermal cycling behavior of (Gd0.9Yb0.1)2Zr2O7/8YSZ gradient thermal barrier coatings deposited on Hf-doped NiAl bond coat by EB-PVD,” Surf. Coat. Technol., 258, 950–955 (2014).10.1016/j.surfcoat.2014.07.051 ↗
53. Y. Zhang, M. Xiea, F. Zhou, et al., “Low thermal conductivity in La2Zr2O7 pyrochlore with a-site partially substituted with equimolar Yb2O3 and Er2O3,” Ceram. Int., 40, 9151−9157 (2014).10.1016/j.ceramint.2014.01.130 ↗
54. L. Guo, H. Guo, H. Peng, and Sh. Gong, “Thermophysical properties of Yb2O3 doped Gd2Zr2O7 and thermal cycling durability of (Gd0.9Yb0.1)2Zr2O7/YSZ thermal barrier coatings,” J. Eur. Ceram. Soc., 34, 1255–1263 (2014).10.1016/j.jeurceramsoc.2013.11.035 ↗
55. Z.-G. Liu, W.-H. Zhang, J.-H. Ouyang, and Y. Zhou, “Novel double-ceramic-layer (La0.8Eu0.2)2Zr2O7/YSZ thermal barrier coatings deposited by plasma spraying. Part 2,” Ceram. Int., 40, No. 7, 11277–11282 (2014).
56. M. Zhao, X. Ren, and W. Pan, “Mechanical and thermal properties of simultaneously substituted pyrochlore compounds (Ca2Nb2O7) x (Gd2Zr2O7)1–x,” J. Eur. Ceram Soc., 35, 1055–1061 (2015).
57. X. Zhou, Z. Xu, X. Fan, et al., “Y4Al2O9 ceramics as a novel thermal barrier coating material for high-temperature applications,” Mater. Lett., 134, 146–148 (2014).10.1016/j.matlet.2014.07.027 ↗
58. Y. Zhou, H. Xiang, and Z. Feng, “Theoretical investigation on mechanical and thermal properties of a promising thermal barrier material Yb3Al5O12,” J. Mater. Sci. Technol., 30, No. 7, 631–638 (2014).
59. K. Matsumoto, Y. Itoh, and T. Kameda, “EB-PVD process and thermal properties of hafnia-based thermal barrier coating,” Sci. Technol. Adv. Mater., 4, 153–158 (2003).10.1016/S1468-6996(03)00009-3 ↗
60. M. Zhao, X. Ren, J. Yang, and W. Pan, “Thermomechanical properties of ThO2-doped Y2O3 stabilized ZrO2 for thermal barrier coatings,” Ceram. Int., 42, 501–508 (2016).10.1016/j.ceramint.2015.08.137 ↗
61. R. Gadow and M. Lischka, “Lanthanum hexaaluminate—novel thermal barrier coatings for gas turbine applications,” Surf. Coat. Technol., 151–152, 392–399 (2002).10.1016/S0257-8972(01)01642-5 ↗
62. W. Ma, D. E. Mack, R. Vaβen, and D. Stover, “Perovskite-type strontium zirconate as a new material for thermal barrier coatings,” J. Am. Ceram. Soc., 91, No. 8, 2630–2635 (2008).10.1111/j.1551-2916.2008.02472.x ↗
63. H. Liu, W. Zhao, Q. An, et al., “Nanomechanical properties and microstructure of ZrO2/Al2O3 plasma sprayed coatings,” Mat. Sci. Eng. A, 518, 185–189 (2009).10.1016/j.msea.2009.05.043 ↗
64. A. Du, Ch. Wan, Zh. Qu, and W. Pan, “Thermal conductivity of monazite-type REPO4 (RE = La, Ce, Nd, Sm, Eu, Gd),” J. Am. Ceram. Soc., 92, No. 11, 2687–2692 (2009).10.1111/j.1551-2916.2009.03244.x ↗
65. X. Chen, Y. Zhang, X. Zhong, et al., “Thermal cycling behaviors of the plasma sprayed thermal barrier coatings of hexaluminates with magnetoplumbite structure,” J. Eur. Ceram. Soc., 30, 1649–1657 (2010).10.1016/j.jeurceramsoc.2010.01.013 ↗
66. Z. Negahdari, M. Willert-Porada, and F. Scherm, “Thermal properties of homogenous lanthanum hexaaluminate/alumina composite ceramics,” J. Eur. Ceram. Soc., 30, 3103–3109 (2010).10.1016/j.jeurceramsoc.2010.07.026 ↗
67. Y.-H. Wang, J.-H. Ouyang, and Z.-G. Liu, “Influence of dysprosium oxide doping on thermophysical properties of LaMgAl1O19 ceramics,” Mater. Des., 31, 3353–3357 (2010).10.1016/j.matdes.2010.01.058 ↗
68. Ch. Wan, T. D. Sparks, P. Wei, and D. R. Clarke, “Thermal conductivity of the rare-earth strontium aluminates,” J. Am. Ceram. Soc., 93, No. 5, 1457–1460 (2010).10.1111/j.1551-2916.2009.03594.x ↗
69. F. Yang, X. Zhao, and P. Xiao, “Thermal conductivities of YSZ/Al2O3 composites,” J. Eur. Ceram. Soc., 30, 3111–3116 (2010).10.1016/j.jeurceramsoc.2010.07.007 ↗
70. Q. Yu, Ch. Zhou, H. Zhang, and F. Zhao, “Thermal stability of nanostructured 13 wt.% Al2O3–8 wt.% Y2O3–ZrO2 thermal barrier coatings,” J. Eur. Ceram. Soc., 30, 889–897 (2010).10.1016/j.jeurceramsoc.2009.10.005 ↗
71. E. Garcia, J. Mesquita-Guimaraes, M. I. Osendi, and P. Miranzo, “Thermal conductivity in mullite/ZrO2 composite coatings,” Ceram. Int., 36, 1609–1614 (2010).10.1016/j.ceramint.2010.02.037 ↗
72. X. Xie, H. Guo, S. Gong, and H. Xu, “Thermal cycling behavior and failure mechanism of LaTi2Al9O19/YSZ thermal barrier coatings exposed to gas flame,” Surf. Coat. Technol., 205, 4291–4298 (2011).10.1016/j.surfcoat.2011.03.047 ↗
73. X. Chen, Y. Zhao, W. Huang, et al., “Thermal aging behavior of plasma sprayed LaMgAl11O19 thermal barrier coating,” J. Eur. Ceram. Soc., 31, 2285–2294 (2011).10.1016/j.jeurceramsoc.2011.05.036 ↗
74. J. Frodelius, E. M. Johansson, J. M. Cordoba, et al., “Annealing of thermally sprayed Ti2AlC coatings,” Int. J. Appl. Ceram. Technol., 8, No. 1, 74–84 (2011).10.1111/j.1744-7402.2010.02569.x ↗
75. J. Hostasa, W. Pabst, and J. Matejicek, “Thermal conductivity of Al2O3–ZrO2 composite ceramics,” J. Am. Ceram. Soc., 94, No. 12, 4404–4409 (2011).
76. Y.-H. Wang, Z.-G. Liu, J.-H. Ouyang, et al., “Preparation and thermophysical properties of LaMgAl11O19–Yb3Al5O12 ceramic composites,” Ceram. Int., 37, 2489–2493 (2011).10.1016/j.ceramint.2011.03.039 ↗
77. L.-D. Zhao, Y.-L. Pei, Y. Liu, et al., “InFeZnO4 as promising thermal barrier coatings,” J. Am. Ceram. Soc., 94, No. 6, 1664–1666 (2011).10.1111/j.1551-2916.2011.04550.x ↗
78. M. Noor-A-Alam and C. V. Ramana, “Structure and thermal conductivity of yttria-stabilized hafnia ceramic coatings grown on nickel-based alloy,” Ceram. Int., 38, 2957–2961 (2012).
79. H. Dong, D. Wang, Y. Pei, et al., “Optimization and thermal cycling behavior of La2Ce2O7 thermal barrier coatings,” Ceram. Int., 39, 1864−1870 (2013).10.1016/j.ceramint.2012.08.034 ↗
80. L. He, X. Zhou, B. Zhong, et al., “Phase evolution, interdiffusion, and failure of La2(Zr0.7Ce0.3)2O7/YSZ thermal barrier coatings prepared by electron beam-physical vapor deposition,” J. Alloys Compd., 624, 137–147 (2015).10.1016/j.jallcom.2014.10.094 ↗
81. J. S. V. Sluytman, S. Krämer, V. K. Tolpygo, and C. G. Levi, “Microstructure evolution of ZrO2–YbTaO4 thermal barrier coatings,” Acta Mater., 96, 133−142 (2015).10.1016/j.actamat.2015.06.007 ↗
82. X. Wang, H. Xiang, X. Sun, et al., “Mechanical properties and damage tolerance of bulk Yb3Al5O12 ceramic,” J. Mater. Sci. Technol., 31, 369−374 (2015).10.1016/j.jmst.2015.01.002 ↗
83. M. Zhao, X. Ren, J. Yang, and W. Pan, “Thermomechanical properties of ThO2-doped Y2O3 stabilized ZrO2 for thermal barrier coatings,” Ceram. Int., 42, 501−508 (2016).10.1016/j.ceramint.2015.08.137 ↗
84. C. Xiao, H. Zhang, H. S. Zhang, et al., “Ce1–xSmxO2–x/2—a novel type of ceramic materials for thermal barrier coatings,” J. Adv. Ceram., 5, No. 3, 244–252 (2016).
85. S. M. Lakiza and L. M. Lopato, “Stable and metastable phase relations in the system alumina–zirconia–yttria,” J. Am. Ceram. Soc., 80, No. 4, 893–902 (1997).10.1111/j.1151-2916.1997.tb02919.x ↗
86. S. Lakiza, O. Fabrichnaya, M. Zinkevich, and F. Aldinger, “On the phase relations in the ZrO2–YO1.5–AlO1.5 system,” J. Alloys Compd., 420, 237–245 (2006).10.1016/j.jallcom.2005.09.079 ↗
87. S. M. Lakiza and L. M. Lopato, “Phase diagram of the Al2O3–ZrO2–La2O3 system,” J. Eur. Ceram. Soc., 25, No. 8, 1373–1380 (2005).
88. S. Lakiza and L. Lopato, “Phase diagram of the alumina–zirconia–samaria system,” J. Am. Ceram. Soc., 89, No. 11, 3516–3521 (2006).10.1111/j.1551-2916.2006.01263.x ↗
89. S. M. Lakiza and L. M. Lopato, “Phase diagram of the Al2O3–ZrO2–Nd2O3 system,” J. Eur. Ceramic Soc., 26, 3725–3732 (2006).10.1016/j.jeurceramsoc.2005.12.005 ↗
90. S. Lakiza, O. Fabrichnaya, Ch. Wang, et al., “Phase diagram of the ZrO2–Gd2O3–Al2O3 system,” J. Eur. Ceram. Soc., 26, 233–246 (2006).10.1016/j.jeurceramsoc.2004.11.011 ↗
91. S. M. Lakiza and L. M. Lopato, “Phase diagram of the Al2O3–ZrO2–Er2O3 system,” J. Eur. Ceramic Soc., 28, No. 12, 2389–2397 (2008).10.1016/j.jeurceramsoc.2008.01.012 ↗
92. S. M. Lakiza, V. P. Red’ko, and L. M. Lopato, “The Al2O3–ZrO2–Yb2O3 phase diagram. I. Isothermal sections at 1250 and 1650°C,” Powder Metall. Met. Ceram., 47, Nos. 3–4, 202–210 (2008).10.1007/s11106-008-9006-6 ↗
93. S. M. Lakiza and L. M. Lopato, “Phase diagrams of the systems Al2O3–ZrO2–Ln(Y)2O3 as a source of multiphase eutectics for creating composite structural and functional materials,” J. Eur. Ceram. Soc., 31, 1293–1303 (2011).10.1016/j.jeurceramsoc.2010.12.004 ↗
94. S. M. Lakiza, Ya. S. Tishchenko, V. P. Red’ko, and L. M. Lopato, “The Al2O3–HfO2–La2O3 phase diagram. II. Phase equilibria at 1250 and 1600°C,” Powder Metall. Met. Ceram., 50, Nos. 5–6, 345−349 (2011).10.1007/s11106-011-9338-5 ↗
95. J. S. Tyschenko, S. M. Lakiza, and E. V. Dudnik, “Phase diagrams of the Al2O3−TiO2−Ln2O3 (Ln = La, Gd, Er, and Y) systems as the basis for creating new structural and functional eutectic ceramics,” in: Abstracts DSECV (April 3–7, 2016, Warsaw, Poland), Warsaw (2016), p. 68.
96. Ya. S. Tyshchenko, S. M. Lakiza, V. P. Red’ko, and O. V. Dudnik, “Isothermal sections of the Al2O3–TiO2–Y2O3 phase diagram at 1550 and 1400°C,” Powder Metall. Met. Ceram., 55, No. 11–12, 698−706 (2017).10.1007/s11106-017-9857-9 ↗
97. J. R. Nicholls, M. J. Deakin, and D. S. Rickerby, “A comparison between the erosion behavior of thermal spray and electron-beam physical vapor deposition thermal barrier coatings,” Wear, 233–235, 352–361 (1999).10.1016/S0043-1648(99)00214-8 ↗
98. U. Schulz, C. Leyens, K. Fritscher, et al., “Some recent trends in research and technology of advanced thermal barrier coatings,” Aerospace Sci. Technol., 7, 73–80 (2003).10.1016/S1270-9638(02)00003-2 ↗
99. S. M. Meier and D. K. Gupta, “The evolution of thermal barrier coatings in gas turbine engine applications,” Trans. ASME, 116, 250–257 (1994).10.1115/1.2910869 ↗
100. B. P. Bewlay, M. R. Jackson, J.-C. Zhao, et al., “Ultrahigh temperature Nb-silicide based composites,” MRS Bull., 28, 646–653 (2003).10.1557/mrs2003.192 ↗