journal article·2025-12

X-ray diffraction pattern analysis of CrFeCoNi high-entropy alloy deposited via cold spray

Alessio Silvello, José María Cabrera, Irene Garcia-Cano, Claudio Aguilar

Powder Diffraction· Volume 40· Issue 4
Publisher page

Abstract

Abstract CrFeCoNi high-entropy alloy (HEA) powder with an equimolar composition was produced via gas atomization and applied as a coating using the cold-spray technique. X-ray diffraction patterns were analyzed to characterize the microstructure of the raw HEA powder and cold-sprayed coatings using Rietveld refinement methods. The HEA powders exhibited a single-phase face-centered cubic crystal structure with a lattice parameter of 0.357349(1) nm, a low microstrain of 4.3(0.17) × 10 −4 , and a crystallite size of 225(8) nm, attributed to the rapid cooling during atomization. In contrast, the cold-sprayed coatings exhibited broadened diffraction peaks, with a reduced crystallite size of 67.9(1.2) nm and an increased microstrain of 2.2(0.23) × 10 −3 , showing crystallite size refinement and an increase in the density of crystalline defects due to severe plastic deformation during deposition. Additional microstructural analysis revealed texture in the {200} plane and intrinsic stacking fault probabilities increasing to 4.4(0.21) × 10 −3 . These findings highlight microstructural changes produced by the cold-spray process. This study provides valuable insights into optimizing cold-spray parameters and tailoring HEA properties for industrial applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

CPT -Thermal Spray Centre-Universitat de Barcelona

Technical University of Catalonia

Fundació Centre CIM-UPC

Universidad Técnica Federico Santa María

Funding

Fondo Nacional de Desarrollo Científico y Tecnológico

References (62)

Show source-provided references
1. 10.1016/j.apt.2022.10380910.1016/j.apt.2022.103809 ↗
2. 10.1016/j.heliyon.2024.e3966010.1016/j.heliyon.2024.e39660 ↗
3. 10.1016/j.surfcoat.2024.13144210.1016/j.surfcoat.2024.131442 ↗
4. 10.1007/s10853-006-0696-110.1007/s10853-006-0696-1 ↗
5. 10.1016/j.colsurfa.2024.13541310.1016/j.colsurfa.2024.135413 ↗
6. 10.1016/j.msea.2016.07.10210.1016/j.msea.2016.07.102 ↗
7. 10.1007/978-3-319-27013-510.1007/978-3-319-27013-5 ↗
8. MAUD: A Friendly Java Program for Material Analysis Using Diffraction
9. 10.3390/coatings1102016810.3390/coatings11020168 ↗
10. German · 2005 · 38
11. 10.1016/j.jmrt.2023.03.14910.1016/j.jmrt.2023.03.149 ↗
12. 10.1016/j.jmrt.2024.05.09910.1016/j.jmrt.2024.05.099 ↗
13. 10.1016/j.msea.2019.05.02210.1016/j.msea.2019.05.022 ↗
14. 10.1361/10599630377034838410.1361/105996303770348384 ↗
15. 10.1016/j.colsurfa.2024.13534510.1016/j.colsurfa.2024.135345 ↗
16. 10.1017/S088571561700004510.1017/S0885715617000045 ↗
17. 10.1016/j.matlet.2006.11.07010.1016/j.matlet.2006.11.070 ↗
18. 10.1107/S002188989000238210.1107/S0021889890002382 ↗
19. Warren · 1990
20. 10.3390/e1704235510.3390/e17042355 ↗
21. 10.1016/j.mattod.2015.11.02610.1016/j.mattod.2015.11.026 ↗
22. 10.1016/j.intermet.2015.11.00510.1016/j.intermet.2015.11.005 ↗
23. 10.1002/pssb.20160064110.1002/pssb.201600641 ↗
24. 10.1007/s11661-021-06137-410.1007/s11661-021-06137-4 ↗
25. 10.1016/0001-6160(53)90006-610.1016/0001-6160(53)90006-6 ↗
26. 10.1007/s11085-016-9696-y10.1007/s11085-016-9696-y ↗
27. 10.1016/j.triboint.2024.11046510.1016/j.triboint.2024.110465 ↗
28. 10.1016/j.msec.2020.11090810.1016/j.msec.2020.110908 ↗
29. 10.1016/j.intermet.2018.01.02110.1016/j.intermet.2018.01.021 ↗
30. 10.1007/978-3-319-27013-5_1210.1007/978-3-319-27013-5_12 ↗
31. 10.1016/j.heliyon.2024.e2646410.1016/j.heliyon.2024.e26464 ↗
32. 10.1016/j.jallcom.2010.05.06110.1016/j.jallcom.2010.05.061 ↗
33. 10.1016/j.jallcom.2021.16096210.1016/j.jallcom.2021.160962 ↗
34. 10.1016/j.intermet.2014.04.00110.1016/j.intermet.2014.04.001 ↗
35. 10.1557/jmr.2019.3710.1557/jmr.2019.37 ↗
36. 10.1016/j.jmapro.2024.12.07710.1016/j.jmapro.2024.12.077 ↗
37. 10.1107/S002188986900655810.1107/S0021889869006558 ↗
38. 10.1016/j.jalmes.2024.10010110.1016/j.jalmes.2024.100101 ↗
39. Effect of Shot Peening on Residual Stresses and Surface Work-Hardening in Cold Sprayed Coatings
40. 10.1107/S002188989700979510.1107/S0021889897009795 ↗
41. 10.1016/0502-8205(59)90015-210.1016/0502-8205(59)90015-2 ↗
42. Multicomponent high-entropy Cantor alloys
43. Hirth · 1982
44. 10.1107/S002188988201203510.1107/S0021889882012035 ↗
45. 10.3390/met912130710.3390/met9121307 ↗
46. 10.1016/j.ijfatigue.2013.09.00110.1016/j.ijfatigue.2013.09.001 ↗
47. 10.1016/j.powtec.2011.02.02610.1016/j.powtec.2011.02.026 ↗
48. 10.1080/21663831.2014.98585510.1080/21663831.2014.985855 ↗
49. 10.1016/S1359-6454(03)00274-X10.1016/S1359-6454(03)00274-X ↗
50. 10.1093/oso/9780198555773.003.000810.1093/oso/9780198555773.003.0008 ↗
51. 10.1016/j.jallcom.2023.17085410.1016/j.jallcom.2023.170854 ↗
52. 10.1063/1.11795110.1063/1.117951 ↗
53. De Cooman · 2018 · 142 · 283
54. 10.1016/j.pmatsci.2021.10083910.1016/j.pmatsci.2021.100839 ↗
55. 10.1017/S088571560001918710.1017/S0885715600019187 ↗
56. 10.3390/met1206095510.3390/met12060955 ↗
57. 10.4028/www.scientific.net/MSF.560.110.4028/www.scientific.net/MSF.560.1 ↗
58. 10.1016/j.matdes.2021.10953210.1016/j.matdes.2021.109532 ↗
59. ASTM International, “ASTM E1920-03, Standard Guide for Metallographic Preparation of Thermal Sprayed Coating.” 2021.
60. 10.1007/978-3-662-06723-910.1007/978-3-662-06723-9 ↗
61. An overview of various applications of cold spray coating process
62. 10.3390/met702004310.3390/met7020043 ↗