journal article·1995-03

Microstructural effect on corrosion of tungsten in SF 6 environment

W. Wong-Ng, C. S. Choi, L. P. Cook

Powder Diffraction· Volume 10· Issue 1
Publisher page

Abstract

Reaction of tungsten (W) with SF 6 has been studied using two types of samples. The first type (type I) consisted of rods fabricated by a drawing process and the second type (type II) consisted of square plates cut from a hot pressed billet. After the corrosion experiments, scanning electron microscopy (SEM) examination of the type I sample indicated the presence of deep pits parallel to the rod axis. X-ray analysis of these rods showed preferred orientation. Pole figure measurement was subsequently conducted to quantify the preferred orientation by using neutron diffraction. A significant orientation effect on the corrosion process was found, possibly originating from the considerable granular elongation parallel with the rod axis produced during the fabrication process. In contrast, the type II sample showed no directional corrosion and insignificant preferred orientation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (5)

Show source-provided references
1. 5 Powder Diffraction File (PDF), produced by the International Centre for Diffraction Data, Newtown Square, PA 19073.
2. 10.1107/S002188988800027510.1107/S0021889888000275 ↗
3. 10.1107/S002188987901263210.1107/S0021889879012632 ↗
4. Preferred Orientation Analysis in Textured Materials
5. 10.1016/0921-5093(91)90355-Q10.1016/0921-5093(91)90355-Q ↗