journal article·2014-06

Residual stress and quantitative phase mapping on complex geometries

Masoud Allahkarami, Jay C. Hanan

Powder Diffraction· Volume 29· Issue 2
Publisher page

Abstract

As a consequence of substantial advances in computer-aided design and manufacturing technology, engineering parts are no longer restricted to combination of simple geometrical shapes. Implementing complex curved surfaces in engineering components in combination with finite-element geometry optimization has become a prevalent means of designing a part. Measuring residual stresses using X-ray diffraction (XRD) on complex curved surfaces requires further development of current measurement methods. Here we investigate how a laboratory XRD system equipped with a five-axis stage and two-dimensional detector can execute sin 2 ψ residual stress measurements on curved surfaces. Shadowing that blocks the diffracted beam to reach the detector was avoided using proper rotations and tilting of the sample. A standard video-laser alignment system commonly used to manually place the sample in the center of diffraction was used to also generate virtual maps of the sample's curved surfaces on a fine mesh grid. The geometry was then used for setting the required rotations and tilt angles. A set of diffraction frames collected using this method on a model zirconia dental ceramic, afforded the opportunity to superimpose phase and stresses on a complex geometry. This is a step forward for the XRD technology, and its usefulness applies to many different industries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Optical measurement and interference techniques · Advanced X-ray Imaging Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Bale H. A. , Tamura N. , and Hanan J. C. (2010). “Cyclic impact fatigue and macroscopic failure considering grain-to-grain residual stress in ceramic dental restorations”. SEM 2010 Annual Conference & Exposition on Experimental and Applied Mechanics.
2. He · 2011
3. 10.1073/pnas.96.25.1420810.1073/pnas.96.25.14208 ↗
4. 10.1016/S0041-624X(99)00181-X10.1016/S0041-624X(99)00181-X ↗
5. 10.1016/j.dental.2011.09.00410.1016/j.dental.2011.09.004 ↗
6. 10.1107/S002188981104222110.1107/S0021889811042221 ↗
8. 10.1007/3-540-47789-6_1910.1007/3-540-47789-6_19 ↗
9. Krawitz · 2001
10. 10.1080/01411594.2011.62534710.1080/01411594.2011.625347 ↗
11. Janushevskis A. , Auzins J. , Melnikovs A. , and Ancane A. G. (2012). “Shape Optimization of Mechanical Components for Measurement Systems,” Advanced Topics in Measurements, Prof. Zahurul Haq (Ed.), chapter 12, 243–264.10.5772/36297 ↗
12. Hagan M. , Demuth H. , and Beale M. (2002). Neural Network Design.
13. Generation of 3-D finite element models of restored human teeth using micro-CT techniques
14. Forest J. and Salvi J. (2002). A review of laser scanning three-dimensional digitizers. Proceedings of the 2002 IEE/RSJ Intl. Conference on Intelligent Robots and Systems EPFL, Lausanne, Switzerland.
15. 10.1016/j.dental.2006.03.01310.1016/j.dental.2006.03.013 ↗
16. Retractable knife-edge for XRD combinatorial screening
17. BrukerAXS Inc. (2005). M86-EXX007 GADDS User Manual, Chapter 12, Madison, Wisconsin, USA.
18. 10.1002/9781118217504.ch610.1002/9781118217504.ch6 ↗
19. Coelho A. A. (2007). TOPAS-Academic, version 4.1 (Computer Software), Coelho Software, Brisbane.