Analysis of kaolinite/chrysotile mixtures by ashing and x-ray diffraction
Source abstract
Abstract
A simple ashing procedure for a mixture containing kaolinite and chrysotile is described that converts kaolinite to amorphous metakaolinite while retaining the diffraction intensity of chrysotile. This ashing procedure removes the X-ray diffraction (XRD) pattern overlap between kaolinite and chrysotile that can interfere with the analysis of even high concentrations of chrysotile. Samples are ashed at 460 °C in a muffle furnace for 40 h to completely convert kaolinite to metakaolinite. The complete conversion of 1 g of kaolinite under these conditions was determined for two standard kaolinite samples from Georgia, KGa-1 and KGa-2. Two of the most common types of commercial chrysotile, long-fiber Canadian and short-fiber Californian chrysotile, are demonstrated to retain diffraction intensity after ashing at 460 °C. Both chrysotile samples have the same integrated intensity for the (002) reflection prior to ashing, although the peak breadths for the two samples are quite different. Ashing at 480 and 500 °C reduces the diffraction intensities of both chrysotile samples by 15%, and broadens the peaks by approximately 3%. Using the prescribed ashing procedure and x-ray diffraction with an internal corundum standard, two kaolinite-bearing building materials containing chrysotile near 0.01 mass fraction were analyzed. The ashing procedure has additional advantages in reducing some samples to powders and removing volatile components, thereby eliminating some sample preparation procedures and concentrating any chrysotile present in the sample. The removal of volatile components improves the sensitivity of XRD analysis to concentrations below 0.01 mass fraction chrysotile.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Clay minerals and soil interactions · Concrete and Cement Materials Research · Soil and Unsaturated Flow
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. 10.1111/j.1151-2916.2001.tb00784.x10.1111/j.1151-2916.2001.tb00784.x ↗
2. 10.1017/S088571560001079410.1017/S0885715600010794 ↗
3. Campbell W. J. , Huggins C. W. , and Wylie A. G. (1980). Chemical and Physical Characterization of Amosite, Chrysotile, Crocidolite, and Nonfibrous Tremolite for Oral Ingestion Studies by the National Institute of Environmental Sciences, U.S. Bureau of Mines Report of Investigation 8452 (USGPO, Washington, DC), 1980-603-102/41.
4. 10.1127/ejm/12/1/001710.1127/ejm/12/1/0017 ↗
5. 10.1016/0003-2670(80)87034-610.1016/0003-2670(80)87034-6 ↗
6. Giese, Jr., R. F. (1988). Kaolin Minerals: Structures and Stabilities, in Reviews in Mineralogy Vol. 19, edited by S. W. Bailey (Mineralogical Society of America, Washington D.C.), pp. 29–62.
7. 10.1021/ac960179p10.1021/ac960179p ↗
8. 10.1017/S088571560001496210.1017/S0885715600014962 ↗
9. Hodgson A. A. (1979). Chemistry and Physics of Asbestos, in Asbestos, Properties, Applications, and Hazards Vol. 1, edited by L. Michaels and S. S. Chissik (Wiley, New York), pp. 67–114.
10. Massart, D. L., Vandeginste, B. G. M., Deming, S. N., Michotte Y., and Kaufman, L. (1988). Chemometrics: A Textbook (Elsevier, Amsterdam), p. 86.
11. 10.1093/annhyg/38.2.13710.1093/annhyg/38.2.137 ↗
12. 10.1346/CCMN.1975.023020910.1346/CCMN.1975.0230209 ↗
13. 10.1016/0040-6031(84)87006-910.1016/0040-6031(84)87006-9 ↗
14. Klein · 1993 · 7
15. 10.1111/j.1151-2916.1999.tb02165.x10.1111/j.1151-2916.1999.tb02165.x ↗
16. Perkins, R. L. and Harvey, B. W. (1993). “Method for the determination of asbestos in bulk building materials,” U.S. Environmental Protection Agency EPA/600/R-93/116, Office of Research and Development, Washington, DC 20460.
17. 10.1038/234093a010.1038/234093a0 ↗
18. 10.1111/j.1151-2916.2000.tb01444.x10.1111/j.1151-2916.2000.tb01444.x ↗
19. U.S. EPA (1982). “Interim method for the determination of asbestos in bulk insulation samples,” U.S. Environmental Protection Agency, 600/M4-82-020.
20. Veblen · 1993 · 28 · 61
21. 10.1017/S088571560001082410.1017/S0885715600010824 ↗
22. Modeling asbestos populations: A fractal approach10.3749/1499-1276-31.2.437 ↗
23. Wicks, F. J. and O’Hanley, D. S. (1988). Serpentine Minerals: Structures and Petrology, in Reviews in Mineralogy Vol. 19, edited by S. W. Bailey (Mineralogical Society of America, Washington D.C.), pp. 91–159.