journal article·2020-01

Influence of surface roughness on tribological and mechanical properties of micro-milled and laser ablated poly (methyl methacrylate) PMMA organic glass

Nalini Ranganathan, F. Anto Lawrence, S. Rajkumar, R. Joseph Bensingh, M. Abdul Kader, Sanjay K. Nayak

Polymer Testing· Volume 81
Publisher page

Abstract

Abstract Poly (methyl methacrylate) organic glass is used in aircraft windshield application; these structures should have better fatigue and fracture resistance to yield good service life. The tendency towards achieving these properties is lost during manufacturing process. This study aims to determine the effect of grooving on PMMA Organic glass. The grooves are manufactured using two different processes namely Micro-Milling (MM) and Laser Ablation (LA). The tribological properties of laser ablated PMMA (LA-PMMA) and micro-milled PMMA (MM-PMMA) were studied using Pin-on-disc tribometer. The grooved surface roughness of both MM-PMMA and LA-PMMA samples has decreased with increase in wear time, whereas after reaching minimum roughness the coefficient of friction has increased; due to higher adhesion between polymer and sliding metal. The tensile properties of differently machined samples have not shown significant difference; whereas the fracture toughness values were higher with LA-PMMA samples. This effect indicated LA-PMMA had greater capacity to resist crack propagation compare to MM-PMMA samples. Similarly the fatigue endurance limit was found higher with LA-PMMA compared to MM-PMMA, due to better finish of LA-PMMA. Further, the microscopic analysis of laser grooved sample before and after fracture have also shown smoother surface and less conic shapes (fracture point) compare to MM-PMMA.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Tribology and Lubrication Engineering · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Rheological, mechanical and morphological properties of poly (methyl methacrylate)/poly (ethylene terephthalate) blend with dual reactive interfacial compatibilization10.1590/0104-1428.1924 ↗
2. Effects of surface roughness on scratch resistance and stress-strain fields during scratch tests10.1063/1.4979332 ↗
3. Jaske
4. Fracture behaviour of notched round bars made of PMMA subjected to torsion at room temperature10.1016/j.engfracmech.2012.05.001 ↗
5. Study on fatigue crack propagation behavior of YB-MD-3 PMMA plates
6. Fatigue crack propagation of PMMA
7. Effect of surface roughness on fatigue life of notched carbon steel
8. The influence of Porosity on Short fatigue crack growth at large stain amplitudes10.1016/0142-1123(91)90364-5 ↗
9. Grain-boundary strengthening in nano-crystalline chromium and the Hall–Petch coefficient of body-centered cubic metals
10. Influence of microstructure on near- threshold fatigue-crack propagation in ultra-high strength steel10.1179/msc.1977.11.8-9.368 ↗
11. Modification of an epoxy resin with a fluoroepoxy oligomer for improved mechanical and tribological properties10.1016/j.msea.2008.12.008 ↗
12. Experimental approach to the laser machining of PMMA substrates for the fabrication of microfluidic devices10.1016/j.optlaseng.2010.11.013 ↗
13. Investigation on the turning parameters for surface roughness using Taguchi analysis10.1016/j.proeng.2013.01.112 ↗
14. Correlation between surface roughness Characteristics in CO2 laser cutting of mild steel
15. Laser-assisted machining of hardened steel parts with surface integrity analysis10.1016/j.ijmachtools.2009.09.001 ↗
16. Evaluation of surface roughness in laser-assisted machining of aluminum oxide ceramics with Taguchi method10.1016/j.ijmachtools.2006.02.009 ↗
17. Evaluation of cutting quality of PMMA using CO2 lasers10.1007/s00170-006-0766-1 ↗
18. Abdelbary · 2015
19. Correlation of the tribological behaviors with the mechanical properties of poly-ether-etherketone (PEEKs) with different molecular weights and their fiber filled composites10.1016/j.wear.2008.07.004 ↗
20. Effect of counterface surface roughness and its evolution on the wear and friction of PEEK and PEEK-bonded carbon fibre composites on stainless steel10.1016/S0043-1648(98)00148-3 ↗
21. The effect of controlled surface topographical features on the unlubricated transfer and wear PEEK10.1016/S0043-1648(96)07354-1 ↗
22. On sliding friction and wear of PEEK and its composites10.1016/0043-1648(94)07051-2 ↗
23. Friction and wear variations of short carbon fiber (SCF)/PTFE/graphite (10 vol.%) filled PEEK: effect of fiber orientation and nominal contact pressure10.1016/j.wear.2009.12.001 ↗
24. Influence of surface roughness on mechanical properties of two computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic materials10.2341/11-391-L ↗
25. Effect of thickness and surface roughness on mechanical properties of aluminum sheets10.1007/s12206-010-0707-7 ↗
26. Effect of surface roughness on fatigue life of machined component of Inconel 718
27. Fracture toughness and creep performance of PMMA composites containing micro and nanosized carbon filaments10.1016/j.compscitech.2010.03.005 ↗
28. The reinforcement effect of nano and microfillers on fracture toughness of two provisional resin materials10.1016/j.matdes.2006.05.029 ↗
29. Structure property relation of hybrid bio-composites based on Jute, Viscose and Polypropylene: the effect of the fibre content and the length on the fracture toughness and the fatigue properties10.1016/j.compositesa.2015.10.037 ↗
30. Effect of filler incorporation on the fracture toughness properties of denture base poly (methyl methacrylate)
31. Influence of surface roughness on ultra –High-Cycle fatigue of Aisi 4140 steel
32. The effect of surface finish on the low cycle fatigue of low and medium carbon steel
33. Evaluation of the effect of surface roughness on crack initiation life
34. Understanding fast macroscale fracture from micro-crack post mortem patterns10.1073/pnas.1113205109 ↗
35. The interpretation and use of fracture-surface morphology—a special case for polystyrene10.1007/BF00353039 ↗
36. Computer simulation of conic-shaped patterns on fracture surfaces of polymers10.1002/app.12352 ↗