Jute/PP composites for covering honeycomb panels: Designability and mechanical behaviors
Source abstract
Abstract
An approach involving low energy consumption was used to transform jute/polypropylene prepregs into a sustainable sandwich structure for automotive application. Fiber orientation and stacking sequence were modified to investigate their influence on the physical-mechanical properties of the prepregs as well as cyclic flexural properties, compression fatigue behaviors and 3D microstructure of honeycomb sandwich panels. The mechanical properties of the face sheets were comparable with GF-SMC; but since they are derived from natural fiber they present a more sustainable and renewable alternative to GF-SMC. Stacking sequence and fiber orientation were found remarkably factors for the limitation of structure and performance design. The honeycomb panels occurred fatigue failures under the compression cyclic loading for 131–547 times. The flexural and shear buckling modes correlated with each other and all the materials failed in a combination of face wrinkling, partial crushing and debonding. It was found that the prepregs could provide more possibilities for optimum structural design of honeycomb sandwich panels, benefiting for the applications in the automotive lightweight field.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Cellular and Composite Structures · Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Recent advancements of plant-based natural fiber–reinforced composites and their applications10.1016/j.compositesb.2020.108254 ↗
2. Composite plastic hybrid for automotive front bumper beam10.3390/jcs7040162 ↗
3. Preparation, characteristics, and application of biopolymer materials reinforced with lignocellulosic fibres10.1155/2023/1738967 ↗
4. Flame retardancy and fire mechanical properties for natural fiber/polymer composite: a review10.1016/j.compositesb.2023.111069 ↗
5. Development of interior and exterior automotive plastics parts using kenaf fiber reinforced polymer composite10.3390/eng4020096 ↗
6. Development of natural fiber-reinforced composite with comparable mechanical properties and reduced energy consumption and environmental impacts for replacing automotive glass-fiber sheet molding compound10.1016/j.jclepro.2018.02.257 ↗
7. Kenaf fiber reinforced composites: a review10.1016/j.matdes.2011.04.008 ↗
8. Life-cycle assessment of bio-based polymers and natural fiber composites
9. A Review on characteristic of polymer composites with natural fiber used as a reinforcement material10.22214/ijraset.2018.1184 ↗
10. A comprehensive review of current developments on the waste-reinforced polymer-matrix composites for automotive, sports goods and construction applications: materials, processes and properties
11. A review on natural fiber reinforced polymer composite and its applications10.1155/2015/243947 ↗
12. Upcycling of waste polyolefins in natural fiber and sustainable filler-based biocomposites: a study on recent developments and future perspectives10.1016/j.compositesb.2023.110852 ↗
13. Use of recycled natural fibres in industrial products: a comparative lca case study on acoustic components in the brazilian automotive sector10.1016/j.resconrec.2013.12.010 ↗
14. Development of interior and exterior automotive plastics parts using kenaf fiber reinforced polymer composite10.3390/eng4020096 ↗
15. Next step for automotive materials10.1016/S1369-7021(03)00429-2 ↗
16. Production and characterization of bamboo and sisal fiber reinforced hybrid composite for interior automotive body application
17. Natural-fiber-reinforced polymer composites in automotive applications
18. Ecodesign of automotive components making use of natural jute fiber composites10.1016/j.jclepro.2009.10.022 ↗
19. Developments in chemical treatments, manufacturing techniques and potential applications of natural-fibers-based biodegradable composites10.3390/coatings11030293 ↗
20. Composites get greener10.1016/S1369-7021(03)00427-9 ↗
21. A review of bast fibres and their composites. Part 1 - fibres as reinforcements10.1016/j.compositesa.2010.06.001 ↗
22. Composite plastic hybrid for automotive front bumper beam10.3390/jcs7040162 ↗
23. Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications10.1016/j.compositesb.2013.08.019 ↗
24. A comprehensive review on light weight kenaf fiber for automobiles
25. Effect of fabric architecture on the shear and impact properties of natural fibre reinforced composites10.1016/j.compositesb.2020.108069 ↗
26. Experimental investigation on characteristics of sisal fiber as composite material for light vehicle body applications
27. Engineering and characterisation of the interface in flax fibre/polypropylene composite materials. Part I. Development and investigation of surface treatments10.1016/S1359-835X(02)00082-9 ↗
28. A review on new bio-based constituents for natural fiber-polymer composites10.1016/j.jclepro.2017.02.132 ↗
29. Improving the impact strength of natural fiber reinforced composites by specifically designed material and process parameters10.1177/1558925004os-1300405 ↗
30. Natural fiber polymer composites: a review10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X ↗
31. Lightweight, strong, moldable wood via cell wall engineering as a sustainable structural material10.1126/science.abg9556 ↗
32. Mechanical performance of PC-based biocomposites10.1016/B978-1-78242-373-7.00004-4 ↗
33. He · 2016
34. Rock mechanical properties and in situ stresses10.1016/B978-0-12-849871-2.00013-7 ↗
35. Plane anisotropy by the polar method10.1007/s11012-005-2132-z ↗
36. Bending behaviors and toughening mechanism of carbon fiber-aluminum honeycomb sandwich structures with stitched fiber belts
37. Mechanical, thermal and interfacial properties of jute fabric-reinforced polypropylene composites: effect of potassium dichromate
38. Damage occurrence at edges of non-crimp-fabric thin-ply laminates under off-axis uniaxial loading10.1016/j.compscitech.2014.04.014 ↗
39. Fabrication and testing of carbon fiber reinforced truss core sandwich panels
40. Three-point bending properties of carbon fiber/honeycomb sandwich panels with short-fiber tissue and carbon-fiber belt interfacial toughening at different loading rate
41. Low-velocity impact response and compression behaviour after the impact of 3d-printed ccfr self-sensing honeycomb structures10.1016/j.compositesb.2023.110992 ↗
42. Marmorini · 1990
43. Modelling the interaction between matrix cracking and delamination in carbon–epoxy laminates under low velocity impact10.1016/j.compscitech.2003.08.008 ↗
44. The low velocity impact response of foam-based sandwich structures10.1016/S1359-8368(02)00009-4 ↗
45. The high velocity impact response of composite and fml-reinforced sandwich structures10.1016/S0266-3538(03)00197-0 ↗
46. New approach for residual compressive strength prediction of impacted cfrp laminates10.1016/0010-4361(95)96809-K ↗
47. Bending and shear improvements in 3d-printed core sandwich composites through modification of resin uptake in the skin/core interphase region10.1016/j.compositesb.2023.110912 ↗
48. Modeling compression failure of laminated composites containing multiple through-the-width delaminations10.1177/002199839202600303 ↗
49. Micro-ct analysis of deviations in fiber orientation and composite stiffness near the microvascular channels embedded in glass-fiber reinforced composites10.1016/j.compstruct.2020.111896 ↗
50. Measuring the impregnation of an out-of-autoclave prepreg by micro-ct10.1016/j.compscitech.2010.12.009 ↗
51. Prediction of low velocity impact damage in carbon-epoxy laminates10.1016/S1359-835X(01)00119-1 ↗
52. Low-velocity impact damage initiation in graphite/epoxy/nomex honeycomb-sandwich plates10.1016/S0266-3538(97)00089-4 ↗