journal article·2015-05

Spectroscopic analysis of post drawing relaxation in poly(lactic acid) with oriented mesophase

Yaming Wang, Lulu Liu, Ming Li, Wei Cao, Chuntai Liu, Changyu Shen

Polymer Testing· Volume 43
Publisher page

Abstract

Abstract Uniaxial deformation of amorphous poly(lactic acid) (PLA) film was performed at 60 °C (around the glass transition temperature). The deformed samples revealed a strain-induced mesophase, and its fraction and thermal stability increased with draw strain. Further annealing was performed in situ at constant length, at the drawing temperature for the films drawn to strains of 100% and 230%. Interestingly, the orientation of amorphous phase relaxed more rapidly for the 100% sample compared with the 230% one. This could be ascribed to the constraint effect of mesophase on the amorphous chains. In addition, the chains of mesophase relaxed slightly for the 100% sample while it retained high orientation for the 230% sample. Meanwhile, the mesophase fraction decreased, and the trend was more significant for the sample drawn to 100%. These effects can be ascribed to the melting of mesophase and the different thermal stabilities of the mesophases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Polymer composites and self-healing · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Processing technologies for poly(lactic acid)10.1016/j.progpolymsci.2008.05.004 ↗
2. Morphological contributions to glass transition in poly(L-lactic acid)10.1021/ma047934i ↗
3. Effect of phthalimide as an efficient nucleating agent on the crystallization kinetics of poly(lactic acid)10.1016/j.polymertesting.2013.06.005 ↗
4. Crystallization kinetics and morphology of partially melted poly(lactic acid)10.1016/j.polymertesting.2014.05.012 ↗
5. Comparison of the effects of commercial nucleation agents on the crystallization and melting behaviour of polylactide10.1016/j.polymertesting.2012.08.011 ↗
6. Structure variation of tensile-deformed amorphous poly(L-lactic acid): effects of deformation rate and strain10.1016/j.polymer.2011.07.003 ↗
7. Strain-induced molecular ordering in polylactide upon uniaxial stretching10.1021/ma9024366 ↗
8. New insights on the strain-induced mesophase of poly(D,L-lactide): in situ WAXS and DSC study of the thermo-mechanical stability10.1021/ma101430c ↗
9. Morphology of polylactic acid crystallized during annealing after uniaxial deformation10.1002/polb.23231 ↗
10. Effect of constrained annealing on the microstructures of extrusion cast polylactic acid films10.1016/j.matlet.2011.07.090 ↗
11. Orientation and structural development of semicrystalline poly(lactic acid) under uniaxial drawing assessed by infrared spectroscopy and X-ray diffraction10.1016/j.polymertesting.2014.11.010 ↗
12. Mesophase formation and its thermal transition in the stretched glassy polylactide revealed by infrared spectroscopy10.1016/j.polymer.2011.08.023 ↗
13. Spectroscopic analysis on cold drawing-induced PLLA mesophase10.1016/j.polymer.2012.09.012 ↗
14. Unusual structural evolution of poly(lactic acid) upon annealing in the presence of an initially oriented mesophase10.1039/c3sm52611a ↗
15. Morphological study on thermal shrinkage and dimensional stability associated with oriented poly(lactic acid)10.1021/ma051022e ↗
16. An analysis of the correlation between structural anisotropy and dimensional stability for drawn poly(lactic acid) films10.1002/app.2100 ↗
17. Crystallinity and dimensional stability of biaxial oriented poly(lactic acid) films10.1016/j.polymdegradstab.2010.02.032 ↗
18. High speed melt spinning of poly(L-lactic acid) filaments10.1002/(SICI)1099-0488(19980430)36:6<1005::AID-POLB9>3.0.CO;2-V ↗
19. Alexander · 1969 · 137
20. Infrared spectrum of poly(L-lactide): application to crystallinity studies10.1021/ma061890r ↗
21. Roles of physical aging on crystallization kinetics and induction period of poly(L-lactide)10.1021/ma801436f ↗
22. Crystal modifications and thermal behavior of poly(L-lactic acid) revealed by infrared spectroscopy10.1021/ma051232r ↗
23. Physical aging enhanced mesomorphic structure in melt-quenched poly(L-lactic acid)10.1021/jp2087863 ↗
24. Preparation of oriented beta-form poly(L-lactic acid) by solid-state coextrusion: effect of extrusion variables10.1021/ma030050z ↗