Effect of surface modification on mechanical properties of filature silk waste and nanoclay filler-based polymer matrix composite

Natural fibers have been attracting researchers and engineers as an alternative reinforcement of synthetic fibers in polymer composites due to their low cost, availability from natural resources, satisfactory high modulus and tensile strength, and biodegradability. Filature silk waste (FSW) is the remnant part of the cocoons which is produced during the silk forming process. The current study focuses on the comparison of tensile properties between untreated filature silk waste reinforced epoxy-based composite (UTFSWREC), 2 wt% alkali-treated filature silk waste reinforced epoxy-based composites (TFSWREC) and 2 wt% alkali-treated filature silk waste reinforced epoxy nanocomposites (TFSWRENC). The tensile properties showed that Young’s modulus of composites increases with surface modification of fiber and further enhances with nanoclay filler. TFSWREC and TFSWRENC displayed a higher tensile modulus than UTFSWREC. Scanning Electron Microscopy (SEM) showed the removal of the sericin layer from the surface of fiber, which resulted in the separation of fibrils and further resulted in the enhancement of the mechanical properties. FTIR analysis confirmed that intermolecular bonding improves with the chemical treatment and further refined with nanoclay filler addition.