Materials Effect in Sensing Performance Based on Surface Plasmon Resonance Using Photonic Crystal Fiber
Source abstract
Abstract
This article explores the effect of sensing performances with subject to change in different types of material and this study is carried out by the support of plasmon-coated photonic crystal fiber (PCF). Three different materials gold, niobium, and doping materials (niobium and Al2O3) have been used as sensing materials to find out the best performance of the raised structure. Each material deposited sequentially on the PCF surface and the structural characterization is analyzed by finite element method (FEM).The investigation shows that it can provide the enhanced wavelength sensitivity of 5000 nm/RIU, 8000 nm/RIU, and 10,000 nm/RIU; and amplitude sensitivity of 171 RIU−1, 188 RIU−1, and 249 RIU−1 for gold, niobium, and doping materials, respectively, at analytes 1.37 and 1.38. In both cases, doping materials show best outcome. Moreover, the proposed model is also investigated to detect the change of phase matching point with the variation of center air hole diameter. The obtained results ensure that it may be helpful for any chemical or biological analytes detection.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Fiber Optic Sensors · Plasmonic and Surface Plasmon Research · Photonic Crystals and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Lee B, Roh S, Park J (2009) Current status of micro-and nano-structured optical fiber sensors. Optical Fiber Technol 15(3):209–221. https://doi.org/10.1016/j.yofte.2009.02.00610.1016/j.yofte.2009.02.006 ↗
2. Homola J (2003) Present and future of surface plasmon resonance biosensors. Anal Bioanal Chem 377:528–539. https://doi.org/10.1007/s00216-003-2101-010.1007/s00216-003-2101-0 ↗
3. Otupiri R, Akowuah E, Haxha S, Ademgil H, AbdelMalek F, Aggoun A (2014) A novel birefrigent photonic crystal fibre surface plasmon resonance biosensor. IEEE Photon J 6:1–11. https://doi.org/10.1109/JPHOT.2014.233571610.1109/JPHOT.2014.2335716 ↗
4. Ortega-Mendoza JG, Padilla-Vivanco A, Toxqui-Quitl C, Zaca-Morán P, Villegas-Hernández D, Chávez F (2014) Optical fiber sensor based on localized surface plasmon resonance using silver nanoparticles photodeposited on the optical fiber end. Sensors 14:18701–18710. https://doi.org/10.3390/s14101870110.3390/s141018701 ↗
5. Akowuah EK, Gorman T, Ademgil H, Haxha S, Robinson GK, Oliver JV (2012) Numerical analysis of a photonic crystal fiber for biosensing applications. IEEE J Quantum Electron 48:1403–1410. https://doi.org/10.1109/JQE.2012.221380310.1109/JQE.2012.2213803 ↗
6. Rifat AA, Ahmed R, Yetisen AK, Butt H, Sabouri A, Mahdiraji GA, Yun SH, Adikan FM (2017) Photonic crystal fiber based plasmonic sensors. Sensors Actuators B: Chemical 1(243):311–325. https://doi.org/10.1016/j.snb.2016.11.11310.1016/j.snb.2016.11.113 ↗
7. Maier SA (2006) Plasmonics: The promise of highly integrated optical devices. IEEE Journal of selected topics in Quantum Electronics 12(6):1671–1677. https://doi.org/10.1109/JSTQE.2006.88408610.1109/JSTQE.2006.884086 ↗
8. Verma R, Srivastava SK, Gupta BD (2012) Surface-plasmon-resonance-based fiber-optic sensor for the detection of low-density lipoprotein. IEEE Sensors J 12(12):3460–3466. https://doi.org/10.1109/JSEN.2012.221040210.1109/JSEN.2012.2210402 ↗
9. Kelkar PV, Coppinger F, Bhushan AS, Jalali B (1999) Time-domain optical sensing. Electron Lett 16.35(19):1661–1662. https://doi.org/10.1049/el:1999111610.1049/el:19991116 ↗
10. Azzam SI, Hameed MF, Shehata RE, Heikal AM, Obayya SS (2016) Multichannel photonic crystal fiber surface plasmon resonance based sensor. Opt Quant Electron 48(2):142. https://doi.org/10.1007/s110810.1007/s11082-016-0414-4 ↗
11. Hasan MR, Akter S, Rahman MS, Ahmed K (2017) Design of a surface plasmon resonance refractive index sensor with high sensitivity. Opt Eng 56(8):087101. https://doi.org/10.1117/1.OE.56.8.08710110.1117/1.OE.56.8.087101 ↗
12. Hasan MR, Akter S, Rifat AA, Rana S, Ahmed K, Ahmed R, Subbaraman H, Abbott D (2018) Spiral photonic crystal fiber-based dual-polarized surface plasmon resonance biosensor. IEEE Sensors Journal 18(1):133–140. https://doi.org/10.1109/JSEN.2017.276972010.1109/JSEN.2017.2769720 ↗
13. Ritchie RH (1957) Plasma losses by fast electrons in thin films. Phys Rev 106(5):874–881. https://doi.org/10.1103/PhysRev.106.87410.1103/PhysRev.106.874 ↗
14. Liedberg B, Nylander C, Lunström I (1983) Surface plasmon resonance for gas detection and biosensing. Sensors Actuators 1(4):299–304. https://doi.org/10.1016/0250-6874(83)85036-710.1016/0250-6874(83)85036-7 ↗
15. Jorgenson RC, Yee SS (1993) A fiber-optic chemical sensor based on surface plasmon resonance. Sensors Actuators B: Chemical 12(3):213–220. https://doi.org/10.1016/0925-4005(93)80021-310.1016/0925-4005(93)80021-3 ↗
16. Rifat AA, Mahdiraji GA, Shee YG, Shawon MJ, Adikan FM (2016) A novel photonic crystal fiber biosensor using surface plasmon resonance. Procedia Eng 1(140):1–7. https://doi.org/10.1016/j.proeng.2015.08.110710.1016/j.proeng.2015.08.1107 ↗
17. Qin W, Li S, Yao Y, Xin X, Xue J (2014) Analyte-filled core self-calibration microstructured optical fiber based plasmonic sensor for detecting high refractive index aqueous analyte. Optics Lasers Eng 1(58):1–8. https://doi.org/10.1016/j.optlaseng.2014.01.00310.1016/j.optlaseng.2014.01.003 ↗
18. Hasan MR, Akter S, Ahmed K, Abbott D (2018) Plasmonic refractive index sensor employing niobium nanofilm on photonic crystal fiber. IEEE Photonics Technol Lett 30(4):315–318. https://doi.org/10.1109/LPT.2017.278647510.1109/LPT.2017.2786475 ↗
19. Hasan MR, Hasan MI, Anower MS (2015) Tellurite glass defect-core spiral photonic crystal fiber with low loss and large negative flattened dispersion over S+ C+ L+ U wavelength bands. Appl Optics 54(32):9456–9461. https://doi.org/10.1364/AO.54.00945610.1364/AO.54.009456 ↗
20. Vial A, Grimault AS, Macías D, Barchiesi D, de La Chapelle ML (2005) Improved analytical fit of gold dispersion: application to the modeling of extinction spectra with a finite-difference time-domain method. Phys Rev B 71(8):085416. https://doi.org/10.1103/PhysRevB.71.08541610.1103/PhysRevB.71.085416 ↗
21. Chakma S, Khalek MA, Paul BK, Ahmed K, Hasan MR, Bahar AN (2018) Gold-coated photonic crystal fiber biosensor based on surface plasmon resonance: design and analysis. Sensing Bio-sensing Res 1(18):7–12. https://doi.org/10.1016/j.sbsr.2018.02.00310.1016/j.sbsr.2018.02.003 ↗
22. Dash JN, Jha R (2014) Graphene-based birefringent photonic crystal fiber sensor using surface plasmon resonance. IEEE Photon Technol Lett 26(11):1092–1095. https://doi.org/10.1109/LPT.2014.231523310.1109/LPT.2014.2315233 ↗
23. Sharma AK, Jha R, Gupta BD (2007) Fiber-optic sensors based on surface plasmon resonance: a comprehensive review. IEEE Sensors J 7(8):1118–1129. https://doi.org/10.1109/JSEN.2007.89794610.1109/JSEN.2007.897946 ↗
24. Aoni RA, Ahmed R, Alam MM, Razzak SA (2013) Optimum design of a nearly zero ultra-flattened dispersion with lower confinement loss photonic crystal fibers for communication systems. Int J Sci Eng Res 4:1–4
25. Lu Y, Hao CJ, Wu BQ, Musideke M, Duan LC, Wen WQ, Yao JQ (2013) Surface plasmon resonance sensor based on polymer photonic crystal fibers with metal nanolayers. Sensors 13(1):956–965. https://doi.org/10.3390/s13010095610.3390/s130100956 ↗