article·1998-07-01

Grain Growth of Fe–Al Wire Fabricated by the Liquid Metal Spinning Method

M. Takeda, Masashi Kurihara, Kimio FUJIE, I. Ohnaka, Tomohiro Endo

Publisher page

Abstract

The grain growth behavior and the geometrical aspects of grain boundaries in Fe–Al wire which was fabricated by the liquid metal spinning method (LMSM) were investigated with respect to grain size distributions and geometrical features of the grain boundaries. An improved method previously proposed by the present authors was applied to Scanning Electron Microscopy-Electron Channeling Pattern (SEM-ECP) in order to clarify the boundary characteristics. The present investigation showed that grains initially smaller in size than the diameter of the wire grew up during heat treatments, and subsequently transformed into the “bamboo-like” structure in which the grains were aligned one-dimensionally along the wire direction. General boundaries were much more frequently observed than special boundaries after the heat treatments. Most of the boundary planes which remained until the late stages of the heat treatments were asymmetric, i.e., they had two different sets of crystallographic indices which were individually attached with two grains adjacent to each other. In the characterization of the tilt–twist component of the grain boundaries, double peaks outstandingly appeared in the distribution curves. The mobility of the grain boundaries was not sensitive to the crystallographic symmetry of the boundaries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.