journal article·2013-05

Thermal stability of nanocrystalline electrodeposited nickel–iron

M.‐T. Schmitt, J. E. Hoffmann, D. Eifler

physica status solidi (a)· Volume 210· Issue 5
Publisher page

Abstract

Abstract During the serial production process of a microgearbox, nickel–iron coatings are electrodeposited onto copper discs using various current densities and are subsequently annealed in a vacuum furnace in the temperature range between 200 and 800 °C. The microstructure (grain size and lattice strain) is characterised via X‐ray diffraction (XRD) measurements. Following electrodeposition, nanocrystalline microstructures result whose grain sizes range from 8 to 12 nm. The iron content of the investigated coatings amounts to 5.7, 8.8 and 17.7 wt.%. By means of an annealing treatment, a reduction in the lattice strain and subsequent grain growth are observed. The change of the microstructural parameters is shifted to higher temperatures in the case of increasing iron content. Light microscope and scanning electron microscope (SEM) images show the formation of precipitations at about 400 °C. The indentation hardness and the indentation modulus change considerably after annealing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Microstructure and mechanical properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Engineering University of Applied Sciences Kaiserslautern Germany

Institute of Materials Science and Engineering University of Kaiserslautern Germany

Funding

Micromotion GmbH in Mainz-Gonsenheim, Germany

References (18)

Show source-provided references
1. 10.1007/s00542-008-0607-210.1007/s00542-008-0607-2 ↗
2. Thommes A. · Wissenschaftliche Berichte FZKA · 1995 · 5586
3. 10.1016/S0921-5093(02)00586-510.1016/S0921-5093(02)00586-5 ↗
4. 10.1016/S0965-9773(99)00050-110.1016/S0965-9773(99)00050-1 ↗
5. 10.1007/s10853-006-0969-810.1007/s10853-006-0969-8 ↗
6. 10.3139/146.10178510.3139/146.101785 ↗
7. Fath A. · Galvanotechnik · 2000 · 91 · 1690
8. Fath A. · Electrochem. Soc. Proc. · 2000 · 19 · 7
9. 10.1107/S002188989900933410.1107/S0021889899009334 ↗
10. 10.1002/adem.20120025310.1002/adem.201200253 ↗
11. Neff H. · 1962
12. Petzow G. · 1994
13. 10.1143/JJAP.45.708410.1143/JJAP.45.7084 ↗
14. 10.4028/www.scientific.net/MSF.654-656.243010.4028/www.scientific.net/MSF.654-656.2430 ↗
15. 10.1016/j.surfcoat.2008.01.01810.1016/j.surfcoat.2008.01.018 ↗
16. Petch N. J. · J. Iron Steel Inst. · 1953 · 174 · 25
17. Knödler A. · Metalloberfläche Angew. Elektrochem. · 1973 · 27 · 48
18. 10.1016/0965-9773(95)00114-X10.1016/0965-9773(95)00114-X ↗