article·2001-10-01

Characteristics of Photoconductive MoS2 Films Grown on NaCl Substrates by a Sequential Process

N. Barreau, J.C. Bernède, J. Pouzet, Maryline Guilloux‐Viry, A. Perrin

Publisher page

Abstract

MoS2 thin film deposition has been achieved on NaCl substrates. The films were obtained by solid state reaction between the constituents in thin film form. Multilayered sequences Mo/S/Mo … Mo/S were annealed under argon flow at 1023 K for half an hour. The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), electron microprobe analysis (EPMA), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and photo-electrical measurements. The films are nearly stoichiometric and crystallized in the expected 2H-MoS2 structure. Moreover, the films are textured with the c-axis of the crystallites perpendicular to the plane of the substrate. XPS analysis reveals a small oxygen contamination of the films, while Na, but no Cl, was detected at the surface of the samples. The high conductivity and photoconductivity of the films agrees with a high crystalline quality. It is shown that Na is the key to achieve photoconductive films. The crystallization process is discussed in the frame of a van der Waals texturation model (pseudo epitaxy) onto dangling bond sulfur terminated surfaces, assisted and strongly enhanced by Na diffusion through the MoS2 films thickness.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · MXene and MAX Phase Materials · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.