article·1991-03-16

Rapid Thermal Annealing of Arsenic Implanted Monocrystalline Silicon

G. Chaussemy, Christian Gontrand, S. N. Kumar, B. Canut, D. Barbier, A. Laugier

Publisher page

Abstract

A systematic study of the effects of various implantation and annealing conditions during the rapid thermal annealing of arsenic implanted (100) silicon is reported. An amorphous layer is created in the material by implantation and good recrystallization is achieved by the annealing process. Annealing above 1000 °C shows a significant spreading of the dopant profile and piling up of As near the surface region. Annealing beyond 1100 °C results in As outdiffusion from the piled up zone and the outdiffusion is stopped by a 90 nm SiO2 cap on the Si surface. Arsenic diffusion and outdiffusion are modelled by solving the one dimensional Fick's equation with semi infinite boundary conditions using a concentration and temperature dependent diffusion coefficient D(C, T), and assuming that the dopant outdiffusion through the surface is a thermally activated process. The arsenic diffusion is classically attributed to As+V− and As+V0 pairs with the related concentration dependent diffusion coefficients taken from the literature.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.