Effect of Phosphorus Ion Implantation on the Fatigue Behaviour of Polycrystalline Nickel
Source abstract
Abstract
Polycrystalline nickel is implanted with 150 keV phosphorus ions to a dose of 5 × 1016 ions/cm2 at room temperature. The specimens with and without phosphorus implantation are tested in load-unload tensile fatigue under stress-controlled condition, and the implanted surface layer is investigated with AES, SEM, and TEM. It is found that the implanted surface region consists of an amorphous NiP phase and a Ni3P compound. Corresponding measurements of microhardness indicate that phosphorus implannation enhances the surface microhardness of nickel. A 19% increase in the endurance limit is found after phosphorus implantation. Compared with the unimplanted specimens under the same fatigue conditions, the number of surface grains in which slip bands could be found decreases, the slip bands become finer and homogeneous, and the surface is smooth. It is also found that the cyclic loading at room temperature can lead to migration of implanted phosphorus out of the surface layer and recrystallization of amorphous NiP phase. Possible strengthening mechanisms for these experimental results are discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Ion-surface interactions and analysis · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.