On the Behaviour of Interaction of Copper Atoms with Lattice Defects in Quenched and Cold-Worked NiCu Alloys
Source abstract
Abstract
Isochronal annealing experiments in the recovery regions of stage III, IV, and V are performed on NiCu alloys after quenching and cold-working, using internal friction and electrical resistance measurements. The annealing stage III appears only in the recovery of cold-worked sample, activated by 1.18 eV, is inferred to the release of interstitials trapped on Cu atoms. The binding energy between the interstitial and Cu atom is found to be 0.12 eV. The recovery stage IV, attributed to the annealing of vacancyCu pairs with the possible formation of complex aggregates, is found to be activated by an energy 1.58 eV. The mechanisms responsible for these two recovery stages are enhanced by increasing Cu atoms content in the matrix. The annealing stage V occurred in the recovery spectrum of both quenched and cold-worked NiCu alloys. For quenched samples this stage is discussed as annealing of vacancy clusters formed during the quenching, while for cold-worked samples, stage V is attributed to recrystallization. Mittels Messungen der inneren Reibung und des elektrischen Widerstands werden isochrone Aus-heilexperimente im Erholungsbereich der Stufen III, IV und V an NiCu-Legierungen nach Abschrecken und Kaltwalzen durchgeführt. Die Ausheilstufe III, die nur bei der Erholung von kaltgewalzten Proben mit einer Aktivierungsenergie von 1,18 eV auftritt, wird der Freisetzung von Interstitials zugeschrieben, die an Cu-Atomen angehaftet sind. Die Bindungsenergie zwischen dem Interstitial und dem Cu-Atom wird zu 0,12 eV bestimmt. Die Erholungsstufe IV, die der Ausheilung von Cu–Leerstellen-Paaren mit der möglichen Bildung von komplexen Aggregaten zugeschrieben wird, besitzt eine Aktivierungsenergie von 1,58 eV. Der für diese beiden Erholungsstufen verantwortliche Mechanismus nimmt mit wachsendem Cu-Atomgehalt in der Matrix zu. Die Ausheilstufe V tritt im Erholungsspektrum sowohl von abgeschreckten als auch von kaltgewalzten NiCu-Legierungen auf. Für abgeschreckte Proben wird diese Stufe diskutiert als Ausheilung von Leerstellenclustern, die während der Abschreckung gebildet werden, während für kaltgewalzte Proben die Stufe V einer Rekristallisation zugeordnet wird.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Semiconductor materials and interfaces · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.