article·1990-12-16

Effect of Surface Charge and Coating on the Field Distribution of Si High-Voltage Thyristor-Like Structures with Bevelled Contours

M. Brauer

Publisher page

Abstract

Results of numerical calculations concerning the electic field distribution at the edge of bevelled p+np+-structures both in structures both in dependence on an assumed surface charge Nss and on the dielectric coating properties of the passivation substance are presented. It is shown that the amount of the peak electric surface field E at the edge of the structure is a sensitive function of the bevel angle θ as well as the polarity and concentration of the surface charge with the influence of the latter becoming rather weak in the case of small values of θ. However, a positive surface charge changes the breakdown characteristic of the structure mentioned for the worse in any case. In dependence on the bevel angle the value of E either passes through a maximum or decreases monotonously to zero in the whole range of surface charges investigated with the former (latter) case being valid for the negatively (positively) bevelled junction. Concerning the extension of the depletion layer width on the slanted edges of the device corresponding curves are obtained. The results presented can serve as a basis for the design of high-voltage thyristor structures. Es werden die Ergebnisse numerischer Berechnungen zur Verteilung der elektrischen Feldstärke auf dem Rande abgeschrägter p+np+-Strukturen sowohl in Abhängigkeit von einer angenommenen Oberflächenladung Nss als auch von den Eigenschaften der Beschichtungssubstanz dargestellt. Dabei erweist sich der Wert der Maximalfeldstärkc E auf dem Rande der Struktur als eine empfindliche Funcktion des Abschrägungswinkels θ sowie der Polarität und Konzentration der Oberflächenladung, wobei für kleine Beträge von θ der Einfluß letzterer weitgehend zurückgeht. Ein positiver Wert von Nss verschlechtert jedoch in jedem Falle die Durchbruchseigenschaften der zugrundegelegten Struktur. In Abhängigkeit vom Abschrägungswinkel durchläuft die Maximalfeldstärke E für alle untersuchten Werte von Nss je nach Art der Abschrägung entweder ein Maximum (negative Abschrägung) oder fällt monoton gegen Null ab (positive Abschrägung). Entsprechende Kurven ergeben sich für die Ausdehnung der Raumladungszone auf den angeschliffenen Flächen am Rande der pn-Übergänge. Die vorgelegten Ergebnisse können als Grundlage bei der Entwurfsgestalung von Thyristorstrukturen im Hochvoltbereich Verwendung finden.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Electromagnetic Compatibility and Noise Suppression · Electrostatic Discharge in Electronics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.