article·1982-07-16

Impurity Profiles at Multi-Pulse Electron-Beam Annealing of Ion-Implanted Silicon

А. В. Двуреченский, R. Grötzschel, N. M. Igonina, B. P. Kashnikov, N. I. Komolova

Publisher page

Abstract

The distribution profiles of impurities (P, As, Sb) implanted into silicon are studied with the back scattering technique, measurements of sheet resistivity and Hall effect in combination with anodic oxidation and subsequent etching of an oxide in the samples annealed with nanosecond multi-pulse electron beams. It is found that with an increase of the number of pulses the impurity profiles change their shape and extend deeper into the sample. The results can be explained on the basis of the melting model of a surface layer whose depth exceeds a diffusion length of an impurity during the existence of the melt after the action of the first electron pulse. A theoretical calculation of the impurity redistribution in accordance with this model agrees well with experiment. It is shown that leakage currents at −1 V do not exceed 10−6 A/cm2 after additional heat treatment at 300°C in diodes prepared by electron multi-pulse annealing.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Ion-surface interactions and analysis · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.