Strain Hardening Characteristics of 99.70% Pure Silver
Source abstract
Abstract
The variation of the Young modulus, strain-hardening coefficient, Xp, and stress sensitivity parameter of the creep rate, m, at different annealing temperature is studied for technically pure silver (99.70% pure). Also the dependence of these parameters on pre-twisting deformation of these samples is examined. It is found that Y and m decrease, at first, with increasing the prior annealing temperature up to 600 °C. Above this temperature, both Y and m tend to increase. Also, Xp is found to increase to a maximum at about 600 °C and then decreases with the increase of the pre-annealing temperatures. This behaviour is attributed to the formation of Cottrell atmospheres around dislocations at temperatures below 600 °C, and to the decrease in the internal stresses above 600 °C, of the tested silver samples. Annealed samples at 600 °C, are tested in tension at different temperature (T/Tm) in the range 0.22 to 0.59. It is found that, Young modulus, Y, yield stress, σy, fracture stress, σf, and fracture strain, σf, decrease markedly with the increase of temperature. For the pre-twisted samples it is found that only Y is a temperature independent parameter, while the other mechanical parameters decrease, in general, with temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.