article·1979-11-16

Modulus effect and internal friction of copper and some copper alloys cold-worked at 78 K

A. van den Beukel, G. J. Den Otter

Publisher page

Abstract

Measurements are performed on the change of the elastic moduli and the internal friction during plastic deformation at 78 K of pure polycrystalline Cu and various Cu based solid solutions containing Ni, Zn, or Au. From the results it should be possible, in principle, to determine the dislocation density Λ and the average dislocation line length Lm as a function of plastic deformation with the use of the Koehler-Granato-Lücke (KGL) theory of viscous dislocation damping. It is concluded that this analysis fails because of the presence of a second term in the dislocation damping, which can be identified as Bordoni relaxation. Methods are developed to separate the internal friction observed in a KGL and a Bordoni component. After the separation Λ and Lm may be determined as a function of plastic strain. The presence of solute atoms gives rise to a reduction of modulus effect and internal friction due to dislocation pinning. The pinning effect of Au is stronger than that of Ni and Zn. It is concluded from the experimental results that the distance between two impurity pinning points along the dislocation line is proportional to c−0.6 (c is the solute concentration) and that this distance is larger by a factor of 10 to 40 than the average distance of solute atoms along the dislocation line.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Magnetic Properties and Applications · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.