Metal vapour vacuum arc ion implantation to synthesize FeSi2 layers on Si(100) and Si(111)
Source abstract
Abstract
Using a metal vapour vacuum arc (MEVVA) ion source, high current Fe ion implantations directly into Si or through an iron film deposited on Si wafers are carried out at an extraction voltage of 40 kV with a current density from 65 to 152 μA cm−2 at a nominal dose from 3 × 1017 to 3 × 1018 cm−2. For the directly implanted Si wafers, at a fixed dose of 4 × 1017 cm−2, a semiconducting β-FeSi2 layer gradually grows with increasing current density. The unique semiconductivity of the formed β-FeSi2 layer is evidenced by the measured Hall mobility being in the range of 60 to 100 cm2/Vs. Implanting with the current density of 152 μA cm−2, the β-FeSi2 transforms into a metallic α-FeSi2 phase with a sheet resistance of 42 Ω/□ at a nominal dose of 3 × 1018 cm−2. For the Si wafers with deposited Fe film, β-FeSi2 is also formed by Fe ion implantation. Post-implantation annealing of the implanted samples provides some useful information for the understanding of the formation mechanism, which is discussed in terms of the simultaneous thermal annealing caused by beam heating during implantation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and interfaces · Semiconductor materials and devices · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.