article·1990-08-16

Influence of Preparation Conditions on the Radiative Recombination in a–Si:H Films

J. Ataev, O. I. Kon’kov, E. I. Terukov, V. Vassilev, А. С. Волков

Publisher page

Abstract

A study of the main features of cw photoluminescence (PL) in glow-discharge (GD) deposited films of a–Si:H is performed to establish a correlation between PL properties and growth conditions: composition of gas mixture [m = 5 to 100%, mSiH4–(100 − m) Ar] rf GD power (P = 0.3 to 1.5 W/cm2) and deposition temperature (Ts = 200 to 590 °C). It is found that the best PL results can be obtained with films prepared at m = 40 to 60%, P ≦ 0.3 W/cm2, and Ts = 250 to 400 °C. These films contain about 11 at.% of hydrogen and possess a high quantum efficiency η > 10%, PL peak energy hvm = 1.4 eV and half-width of spectra Δ = 0.30 eV as well reveal a strong temperature quenching of PL (To = 27 K). Any deviations of deposition conditions from the optimum lead to decreasing of η, shift hvm to lower energies, broadening of spectra and increasing of Ts. The conclusion drawn is that the films prepared under optimal conditions possess the narrowest tails of localized states and a minimum concentration of defect states (dangling bonds) in the forbidden gap.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.