article·1988-12-16

Charge injection into SiO2 films at fields between 1 and 3 MV cm−1 after electrical stress

H. Krause, Hedva Bar

Publisher page

Abstract

SiO2 films on monocrystalline silicon substrates are stressed at fields up to 10 MV cm−1. After stress currents in the field range below 4 MV cm−1 with current densities of 10−12 A cm−2 to larger than 10−10 A cm−2 are observed. From experimental results about current–time behaviour and simultaneously measured flatband voltage–time behaviour it is concluded that the stress generated currents are caused by tunnel injection of electrons (and possibly also holes) into trap clusters within the interface regions of the SiO2 films. At strong action of stress microchannels become generated through whole the film where hopping conduction takes place. Currents in the lower field range flowing in the conduction band or valence band caused by locally lowered barriers or by simple emptying of flat traps can be excluded. Also moving internal charge distributed homogeneously in the SiO2 films is not in agreement with experimental results.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · High voltage insulation and dielectric phenomena · Advancements in Semiconductor Devices and Circuit Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.