article·1987-12-16

Internal Friction Peaks Associated with the Polygonization Boundaries in Aluminium and Dilute Aluminium-Copper Alloys

Sisi Yan, T. S. Kê

Publisher page

Abstract

Measurements on internal friction and elastic modulus of 99.999 wt% aluminium are made with a forced vibration torsion pendulum. The fully annealed aluminium specimen is bent at room temperature and then annealed at 402 °C for 3 h. Internal friction is then measured at 396 °C as a function of vibration frequency and a very high peak (Q−1 = 0.26) is observed around 8 × 10−3 Hz. The activation energy associated with this peak as measured by a change of temperature of measurement is 1.5 eV. On converting the frequency of measurement to 1 Hz, the optimum temperature of this internal friction peak should be about 530 °C. This peak disappears after an annealing at 450 °C or higher. X-ray studies show that the appearance of this internal friction peak corresponds to the occurrence of polygonization in the specimen which is evidenced by the splitting of the Laue spots. Experiments with Al-0.015 wt% Cu show that the internal friction peak survives after an annealing at 630 °C and the peak appears at 580 °C (f = 0.3 Hz) with Q−1 = 0.22 measured with a conventional torsion pendulum as function of temperature of measurement.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Force Microscopy Techniques and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.