Thermal Crystallization of Copper Indium Diselenide Films in Flowing or Pressurized Atmosphere
Source abstract
Abstract
Structural, electrical, and optical properties of CuInSe2 films crystallized by annealing in flowing or pressurized N2 atmosphere are investigated. The samples are made by vacuum deposition from a stoichiometric compound without substrate heating. Though the as-deposited film was noncrystalline, CuInSe2 films oriented strongly along the (112) plane are obtained after annealing in N2 atmosphere in the temperature range of 200 to 650 °C. The orientation to the (112) plane is much more favored whith increasing the annealing temperature above 400 °C in flowing N2. The thin films annealed in pressurized N2 remain approximately of stoichiometric composition, independent of the annealing temperature, while In and Se deficiencies increase with increasing annealing temperature for the films annealed in flowing N2. All the thin films show p-type conductivity, and the resistivity of the thin films annealed in flowing and pressurized N2 are in the range of 10−3 to 5 × 10−3 ficm and 10−1 to 10Ωcm, respectively. The band gap of all the thin films was about 1.0 eV, independent of the annealing conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.