article·1984-03-16

Reduction of copper contamination in germanium on heat treatments above 700 °C

Yōichi Kamiura, Fumio Hashimoto, S. Yoneyama, T. Nobusada

Publisher page

Abstract

Two classes of experimental results are presented of reducing the copper contamination in germanium on heat treatments above 700 °C. The first class of the results presented is concerned with the comparison of various gettering techniques developed so far. The gallium coating is found to be the best in view of the gettering ability and the convenience of application. It is essentially important in this technique to pre-heat Ga-coated samples at 700 °C for 1 h prior to the main heat treatments at any higher temperatures. The second class are the results of the degree of copper contamination in various furnaces. Conventional resistance-heated furnaces with nichrome-wire heaters or Sic heating elements are not suitable for high-purity heat treatments, since the heaters may possibly be a principal source of the contamination. The infrared furnace shows a low density of contaminating copper, ≈ 1013cm−3, on heat treatments at 700 °C.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Aluminum Alloy Microstructure Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.