Creep at low and average stress of several highly concentrated solid solutions of the cubic centered type
Source abstract
Abstract
The high-temperature creep (T/Tf ≧ 0.6) of several cubic centered solid solution of the β type: CuAl, CuSn, CuZn β and β', AgZn, AgCd, and FeCoV is studied in a wide stress range. The existence of a critical stress σc is observed, it separates two behaviours characterised by sensitivity coefficients m, in the region of 6 at low stress and of 3.4 for higher stresses. This behaviour has to be compared to that of f.c.c. solid solutions. For several of these alloys the measurement of the internal stress σi shows that σi is independent of the applied stress at least in the accessible experimental area. The change in slope for σ ≈ σc of the curve (σ*/σ) = f(σ) corroborates the transition on m and shows that there does occur a change in the mechanisms which control the creep rate. Although the strain rate seems to be controlled by recovery at low stresses, (σ → σi), it is shown that the creep of these alloys can be described as a viscous glide of dislocations under the action, of the effective stress σ* in the entire area of applied stress. Indeed, curves ln ϵs = f(ln σ*) are linear and lead to coefficient m* = 3.2. The stacking fault energy is estimated for these β phases by assuming that the transition criterion formulated for face-centered cubic solutions is transposable to cubic-centered solutions. The values order obtained is acceptable.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties · Brake Systems and Friction Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.