Dislocation-structure changes during the dip tests and the dynamical internal stress in AlMg alloys at high temperatures
Source abstract
Abstract
On the basis of the features of individual dislocation motion observed by HVEM in-situ experi-ments, two kinds of steady states during creep and constant strain-rate deformation in Class-I AlMg alloys at high temperatures arc dcscribcd by applying Sumino's two deformation rules. Both the deformation rules give not only an identical combination of the moving disloration density and the average dislocation velocity but also an identical value of the average (dynamical) internal stress; these results show the existence of a duality relation, first found in plastic defor-mation. A systematic discrepancy between the normalized internal stress derived and the one measured by the extrapolation method of dip test is reasonably explained by subboundary forma-tion and small displacements of individual dislocativns which arc observed to occur inevitably upon partial unloading in the present HVEM in-situ experiments. Auf der Grundlage der Einzelheiten der bei HVEM-in-situ-Experimenten beobachtcten indivi-duellen Versetzungsbewegung werden zwei Arten von stationären Zuständen während des Krie-chens und der Deformation bei konstanter Verformungsgcschwindigkeit in AlMg-Legierungen der Klasse I bei hohen Temperaturen unter Anwendung der beiden Deformationsrcgcln von Sumino beschrieben. Beide Deformatiansregcln ergeben nicht nur eine identische Kombination der Dichte der beweglichen Versetzungen und der mittleren Versetzungsgeschwindigkcit, sondern auch einen identischen Wert der mittleren (dynamischen) inneren Spannung. Diese Ergebnisse meisen auf die Existenz einer Dualitätsbeziehung hin, die erstmals bei plastischer Deformation gefunden wird. Eine systematische Diskrepanz zwischen der daraus abgeleiteten normicrtcn inneren Spannung und der init dem Extrapolationsverfahren der Abfallmethode gemessenen inneren Spannung wird durch Teilgrenzenbildung und kleine Verschiebungen von individuellen Ver-setziingen befriedigend erklärt, die nach partieller Unbelastung in den dargestellten HVEM-in-situ-Experimenten unvermeidlich auftreten.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.