article·1986-03-16

The Influence of Mg Doping on the Optical and Electrical Properties of GaAs/(Al, Ga) As Injection Lasers

H. Bachert, W. Pittroff, I. Reciienberg, St. Stoeff, Klaus Vogel

Publisher page

Abstract

Mg is used in LPE (liquid phase epitaxy) as the p-type dopant instead of Ge. The initial doping of only the p-type guiding layer of usual laser quality double heterostructures (DHS) leads to a controllable diffusion through the thin active layer into the n-type guiding layer. The depth and the acceptor concentration are functions of the Mg concentration (wt%) in the melt. Although Mg has a high affinity to oxygen it is possible to get nearly defect free structures with improved properties compared to the Ge-doped ones. 3 μm planar stripe lasers are prepared showing good reliability, a T0 of more than 200 K, power efficiency of 0.3 mW/mA and a threshold current below 80 mA (T0 from is ∼ exp (T/T0), with T – the temperature in K, is – the threshold current).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor Lasers and Optical Devices · Solid State Laser Technologies · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.