The precipitation of Ta64C in dilute tantalum–carbon alloys
Source abstract
Abstract
The precipitation of Ta64C in dilute tantalum–carbon alloys is investigated using transmission electron microscopy. The alloys are prepared by depositing carbon on pure tantalum foils followed by diffusion annealing. On ageing the solution treated samples at 300°C it is noticed that the body centred tetragonal Ta64C phase is precipitated in a plate shape along {100}Ta planes. These precipitates are found to contain {110} “perpendicular twin boundaries” at equal intervals suggesting that the c-axes of both the twin components lie on the habit plane of the precipitate. This leads to the conclusion that the habit plane is subjected to a uniform dilatation of about 6.5% and that the strain in the direction normal to the habit plane is almost zero. The results are discussed in the light of computed values of total non-chemical free energy requirements for different configurations of the precipitate. The formation of these precipitates with the observed configuration and the size is shown to be energetically favourable when the mismatch between the lattices of the matrix and the precipitate phases across the habit interface is corrected by the introduction of a square grid array of dislocations.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.