article·1981-03-16

Recrystallization near low-angle [001] tilt boundaries following cobalt implantation in bicrystalline thin films of gold

Y. Komem, Avital Greenberg, C. Bauer

Publisher page

Abstract

Low-angle [001] tilt boundaries in bicrystalline thin films of gold are produced by vapor deposition and epitaxial growth on bicrystalline substrates of NaCl, and subsequently subjected to cobalt implantation in order to investigate effects of ion implantation, radiation damage, and annealing treatments on structure and kinetic behavior of preselected grain boundaries by scanning transmission electron microscopy. Moderate integrated fluxes of cobalt (≈ 5 × 1013 Co+/cm2) produce approximately 1018 dislocation loops/cm3, measuring about 3 nm in diameter, and, in addition, obscure the original dislocation structure. Following annealing at 200 °C, new grains, characterized by a 〈112〉 crystallographic axis oriented parallel to the original 〈100〉 axes, are observed to nucleate at the original boundary and expand into one grain. Results are interpreted in terms of generation of interstitials and vacancies during cobalt implantation, subsequent condensation of excess vacancies to form dislocation loops, and eventual nucleation and growth of new grains (recrystallization) due to the large strain energy associated with defects produced by the implantation process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ion-surface interactions and analysis · Optical Coatings and Gratings · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.