article·1984-10-16

On the Optimal Choice of Substrate for Hgo.8Cdo.2Te Epitaxial Layers

H. Booyens, J. H. Basson

Publisher page

Abstract

The requirements for minimizing the introduction of misfit dislocations into epitaxial layers of Hgo.8Cdo.2Te on ZnzCd1−zTe and CdSeyTe1−y substrates are considered. On the basis of previously published results on the yield stress of Hgo.8Cdo.2Te, it is predicted that misfit dislocations cannot be avoided during LPE growth and that the optimum choice of substrate composition is z = 0.049 for ZnzCd1−zTe and y = 0.042 for CdSeyTe1−y at 500 °C. It is shown that MBE growth has significant advantages as far as the introduction of misfit dislocation is concerned. In fact, misfit dislocations may be largely avoided if the growth temperature could be reduced and cooling rate increased. The optimum substrate compositions for MBE growth at 200 °C are z = 0.045 for ZnzCd1−zTe and y = 0.039 for CdSeyTe1−y. Temperature cycling between 77 K and room temperature is not expected to make a significant difference as regards the introduction of dislocations, compared with the effects of cooling after growth.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Semiconductor Detectors and Materials · Nuclear Materials and Properties · Machine Learning in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.