article·1984-05-16

Internal and friction stresses for AlMg class I high temperature creep alloys

D. O. Northwood, I. O. Smith

Publisher page

Abstract

The effective stress, σe, and the internal stress, σi, for high temperature creep are determined by stress-dip tests at 300 °C on AlMg alloys containing 1.74, 4.20, and 7.72 at% Mg. The data are fitted to an equation previously developed by Weertman, σe/σ = (1 − C) (1 − σf/σ), where σ is the applied stress, C is a temperature independent constant and σf is a friction stress. The friction stress increases with increasing Mg content from a value of 1.05 MPa for the Al–1.74 at% Mg alloy to 2.73 MPa for the Al–7.72 at% Mg alloy. A friction stress of this magnitude is consistent with a mechanism involving the drag of a region of strew-induced order. The internal stress increases with increasing applied stress and decreasing stacking fault energy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.