Low-temperature dislocation pinning and breakaway observed in Ta containing H
Source abstract
Abstract
Internal friction (IF) and modulus below 100 K in high purity Ta polycrystalline specimens containing very low concentration of H (RRR = 2600 to 5000, CH = 8 to 20 at ppm) are studied after various treatments, i.e. quenching into liquid He, high amplitude vibration (ϵh ≈ 2 to 5 × 10−5) at 5 K (HAV(5K)) and the slow cool-down with or without vibration at low amplitude (ϵ1 ≈ 2 × 10−6) (the ON- or OFF-cool-down). During warm-up after the OFF-cool-down from ≈ 60 K, an anomalous softening is observed to occur below 60 K, but during the ON-cool-down from ≈ 60 K, this decreased modulus is almost remained but not recovered. This observation is reproducible repeatedly. Detailed observations suggest that there are at least two types of H pinners in this temperature range; the one is responsible for an appearance of the anomalous softening through the breakaway of dislocations from them, the weak H pinners (WHP's), and the other, responsible for the remaining part of the pinning, the strong H pinners (SHP's). During the high amplitude vibration at 5 K, these WHP's and a part of the SHP's are broken up and H atoms thus released from dislocations are considered to move into the matrix to be trapped by the various traps. During warm-up after this, dislocation pinnings are observed to occur at about 7 and 30 K. Similar pinnings are also observed during warm-up after quenching into liquid He. The temperatures of these pinnings show a good correlation with those of the recovery stages of the quenched-in resistivity reported by Hanada. Besides these results, it is also observed between 2 and 5 K that both IF and modulus decrease with increasing temperature. From the effect of deformation on these decreases, it is suggested that there should be a relaxation peak below 2 K which is associated with kink diffusion in non-screw dislocations.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.