article·1978-12-16

Acoustic absorption and emission associated with the martensitic transformation in an FeNi alloy

Shou-Hsiung Hsu, J. H. Chen, P. C. Clapp

Publisher page

Abstract

Multiple ultrasonic attenuation peaks associated with martensitic transformation are observed in an FeNi (29.58 wt% Ni) alloy. Attenuation peaks are observed just prior to the formation of martensite as indicated by acoustic emission over a wide temperature range. The temperature associated with formation of the martensite plates is obtained by ultrasonic attenuation and acoustic emission in this FeNi alloy. The correlation of attenuation peaks with subsequent martensite formation lends support to the soft mode model of martensite nucleation. The first acoustic emission event is found to be approximately 50°C higher than the published values of Ms in this alloy. It is found that a detectable change of the sample resistivity as a function of temperature occurs only when a large number of martensite plates are formed, whereas the first few martensite plates formed at higher temperatures can be detected only by the more sensitive methods of acoustic emission and ultrasonic attenuation measurements.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Thermography and Photoacoustic Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.