Neutron irradiation damage in a plastically deformed Fe–40 at% Al ordered alloy
Source abstract
Abstract
Samples of a Fe–40 at% Al ordered alloy are plastically deformed by tensile deformation to various degrees up to 3%. Then they are irradiated at liquid hydrogen temperature with fission neutrons up to an integrated dose of 7.2 × 1017 n/cm2 (E > 1 MeV) and the influence of cold working on the production and the recovery of radiation induced point defects is studied by electrical resistivity measurements. The production rate dΔϱ/dt as a function of Δϱ appears to obey in good approximation a linear relationship, except at the beginning of the process. It is clearly noticed that the presence of dislocations enhances the defect retention as it has already been reported in pure metals. As concerns the isochronal annealing of the radiation induced resistivity, two main results are observed when the degree of deformation increases. First the magnitude of the two later stages labelled C and D increases; secondly, the peak temperature of stage C is shifted to lower temperatures. This enhancement of the recovery rate indicates that the mean number of jumps for a mobile defect decreases when the density of sinks increases. Such a behaviour is in agreement with other experimental evidences and seems consistent with the free migration of interstitials during stage C while vacancies anneal out during stage D.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.