journal article·2023-12-08

Tunable Stereolithography Photopolymerization Resin for Molding Water-Soluble Cavities

Charles Rafalko, Benjamin J. Stovall, Tawanda Zimudzi, Michael A. Hickner

ACS Applied Polymer Materials· Volume 5· Issue 12
Publisher page

Abstract

Vat photopolymerization (VP), or stereolithography, is rapidly being adopted as an additive manufacturing (AM) technique that yields parts with high precision and feature sizes below 100 μm. As such, the development of materials for VP is essential for extending this printing technology into a variety of application spaces. In this work, we describe a thermoset acrylate polymer system suitable for fabricating sophisticated parts via vat polymerization (VP) with excellent strength ( E = 1500 MPa) and toughness (strain to break = 13%–46%). The printed parts can be formulated to be completely water-soluble for cavity molding applications. While the material does not dissolve in neutral or acidic aqueous conditions, it rapidly dissolves in the presence of base, a property afforded by using methacrylic anhydride as a hydrolytically cleavable cross-linker. Additionally, adjustment of the monomer ratio and cross-linker content in the resin formulation tunes the mechanical properties of the printed polymer. The resulting material is readily processed with vat polymerization additive manufacturing techniques, allowing for direct and rapid construction of intricate and complex parts for applications such as tissue engineering or lost-wax casting.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Photopolymerization techniques and applications · 3D Printing in Biomedical Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemistry, The Pennsylvania State University, University Park, Pennsylvania 16802, United States

Department of Chemical Engineering and Materials Science, Michigan State University, 428 South Shaw Lane, Room 2258, East Lansing, Michigan 48824, United States

Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802, United States

Materials Characterization Lab, The Pennsylvania State University, University Park, Pennsylvania 16802, United States

Materials Research Institute, The Pennsylvania State University, University Park, Pennsylvania 16802, United States

References (48)

Show source-provided references
1. 10.1016/j.actbio.2020.10.00110.1016/j.actbio.2020.10.001 ↗
2. 10.1016/j.bprint.2021.e0014010.1016/j.bprint.2021.e00140 ↗
3. 10.1002/adfm.20200872910.1002/adfm.202008729 ↗
4. 10.3390/polym1310154110.3390/polym13101541 ↗
5. 10.1016/j.addma.2021.10200110.1016/j.addma.2021.102001 ↗
6. 10.1016/j.addma.2021.10240810.1016/j.addma.2021.102408 ↗
7. 10.1016/j.pmatsci.2020.10073610.1016/j.pmatsci.2020.100736 ↗
8. Basso, A.; Mendez Ribo, M.; Halina Danielak, A.; Yang, B.; Kjeldsteen, P.; Valler, P.; Bue Pedersen, D.; Zhang, Y. 3D Printed Mold for Powder Injection Molding Process. In Proceedings of the Joint Special Interest Group Meeting between Euspen and ASPE Advancing Precision in Additive Manufacturing; The European Society for Precision Engineering and Nanotechnology, 2019; pp 71–74. www.euspen.eu
9. 10.1007/978-3-030-57997-5_8310.1007/978-3-030-57997-5_83 ↗
10. 10.1016/j.eurpolymj.2020.11009410.1016/j.eurpolymj.2020.110094 ↗
11. 10.1002/adma.20190397010.1002/adma.201903970 ↗
12. 10.1002/app.2202510.1002/app.22025 ↗
13. 10.1016/j.cej.2022.13940110.1016/j.cej.2022.139401 ↗
14. 10.1016/j.cej.2021.13158010.1016/j.cej.2021.131580 ↗
15. 10.1021/acsapm.2c0191610.1021/acsapm.2c01916 ↗
16. 10.1109/MEMS46641.2020.905620810.1109/MEMS46641.2020.9056208 ↗
17. 10.1021/acsami.8b0417710.1021/acsami.8b04177 ↗
18. 10.1016/j.biomaterials.2017.06.00510.1016/j.biomaterials.2017.06.005 ↗
19. 10.1002/adma.20210775910.1002/adma.202107759 ↗
20. 10.1021/acsami.8b1303110.1021/acsami.8b13031 ↗
21. 10.1016/j.addma.2018.03.01310.1016/j.addma.2018.03.013 ↗
22. 10.3389/fchem.2019.0076010.3389/fchem.2019.00760 ↗
23. 10.1002/app.3149110.1002/app.31491 ↗
24. 10.1007/s11837-017-2657-310.1007/s11837-017-2657-3 ↗
25. 10.1002/mame.20200032510.1002/mame.202000325 ↗
26. 10.1016/j.compscitech.2022.10940310.1016/j.compscitech.2022.109403 ↗
27. 10.3390/applmech204005510.3390/applmech2040055 ↗
28. 10.1021/acs.chemrev.7b0007410.1021/acs.chemrev.7b00074 ↗
29. 10.1016/j.bioactmat.2019.12.00310.1016/j.bioactmat.2019.12.003 ↗
30. 10.1021/acsapm.2c0035810.1021/acsapm.2c00358 ↗
31. 10.3390/su1303131310.3390/su13031313 ↗
32. 10.1016/S0079-6700(03)00045-510.1016/S0079-6700(03)00045-5 ↗
33. 10.1039/C8PY01792A10.1039/C8PY01792A ↗
34. 10.1002/adfm.20170180710.1002/adfm.201701807 ↗
35. 10.3390/polym1421451110.3390/polym14214511 ↗
36. 10.1021/acsomega.1c0535410.1021/acsomega.1c05354 ↗
37. 10.1126/sciadv.150138110.1126/sciadv.1501381 ↗
38. Bellamy L. J. · 1975 · 3710.1007/978-94-011-6017-9_3 ↗
39. 10.1021/acs.jchemed.8b0065910.1021/acs.jchemed.8b00659 ↗
40. 10.3390/ijms2402110910.3390/ijms24021109 ↗
41. 10.1002/adem.20220178510.1002/adem.202201785 ↗
42. 10.1063/1.172379210.1063/1.1723792 ↗
43. 10.3390/ma1403047810.3390/ma14030478 ↗
44. 10.1016/j.polymer.2003.12.04010.1016/j.polymer.2003.12.040 ↗
45. jwolee. Pulmonary arteries - 2 Piece Snap-Fit. jwolee. Pulmonary arteries - 2 Piece Snap-Fit. CAD model used under Creative Commons-attribution license. https://www.thingiverse.com/thing:94872 (accessed November 19, 2021).
46. 10.1007/s10439-016-1643-110.1007/s10439-016-1643-1 ↗
47. 10.1002/adhm.20170124910.1002/adhm.201701249 ↗
48. 10.1038/srep2722610.1038/srep27226 ↗