journal article·2019-10-11

Enhancement of Adhesion Strength of Perfluoroalkylpolyethers on Rough Glassy Silica for Antismudge Coatings

Sung Hoon Lee, Yong Nam Ahn, Venkatesh Botu, Ross J. Stewart, Sang Yoon Oh

ACS Applied Polymer Materials· Volume 1· Issue 10
Publisher page

Abstract

The adhesion behavior of perfluoropolyether (PFPE) on rough silica surfaces is investigated by steered molecular dynamics simulations. To reproduce bond breakage during sliding of PFPE, a dynamic bond breaking method is developed and applied to the PFPE–silica interface. Calculated results reveal that nanoscale roughness is a critical parameter that affects the adhesion strength due to the PFPE film thickness of 1 nm, and the adhesion strength also depends on the molecular density of PFPE on the silica surface. The effect of roughness amplitude, spacing, and molecular weight of PFPE are individually analyzed to find a key parameter for adhesion enhancement. Adhesion strength on a flat surface is highest and decreases with increasing roughness within the considered conditions. When Ra = 17.5 Å, adhesion strength is 3 times lower than the flat surface, and vacant pores at the interface are observed, which implies a reduced molecular density of PFPE from 0.31 to 0.27 molecules/nm2. Increasing the roughness spacing removes vacant pores at the interface and hence, adhesion enhances up to 50% of the original interface. Decreased molecular weight is another way to increase surface density of PFPE, and the highest adhesion is observed with the lowest molecular weight of PFPE. Comparing the change of adhesion strength, both roughness amplitude and molecular weight are determined as key parameters for enhancing adhesion strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Adhesion, Friction, and Surface Interactions · Surface Modification and Superhydrophobicity · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Corning Technology Center Korea, Corning Precision Materials Co., Ltd., 212 Tangjeong-ro, Asan, Chungcheongnam-do, 31454, Republic of Korea

Science and Technology Division, Corning Research & Development Corporation, 1 Science Center Drive, Corning, New York 14831, United States

References (48)

Show source-provided references
1. 10.1016/j.diamond.2010.01.00410.1016/j.diamond.2010.01.004 ↗
2. 10.1007/s11998-010-9293-y10.1007/s11998-010-9293-y ↗
3. 10.1016/S0022-1139(98)00298-X10.1016/S0022-1139(98)00298-X ↗
4. 10.1016/S0300-9440(00)00153-310.1016/S0300-9440(00)00153-3 ↗
5. 10.1021/ma901227k10.1021/ma901227k ↗
6. 10.1021/ma052477710.1021/ma0524777 ↗
7. 10.1002/app.2228310.1002/app.22283 ↗
8. 10.1016/j.apsusc.2014.04.21110.1016/j.apsusc.2014.04.211 ↗
9. 10.1002/adv.2009810.1002/adv.20098 ↗
10. 10.1109/TMAG.2003.81645010.1109/TMAG.2003.816450 ↗
11. 10.1016/S0301-679X(02)00190-110.1016/S0301-679X(02)00190-1 ↗
12. 10.1016/j.wear.2005.01.01310.1016/j.wear.2005.01.013 ↗
13. 10.1016/j.polymer.2005.12.02810.1016/j.polymer.2005.12.028 ↗
14. 10.1002/app.2435010.1002/app.24350 ↗
15. 10.1016/j.jfluchem.2015.08.01910.1016/j.jfluchem.2015.08.019 ↗
16. 10.1021/acs.jpcc.6b0808110.1021/acs.jpcc.6b08081 ↗
17. 10.1021/acs.jpcc.7b0836110.1021/acs.jpcc.7b08361 ↗
18. 10.1021/acs.jpcc.6b1039410.1021/acs.jpcc.6b10394 ↗
19. 10.1016/j.polymer.2016.06.01710.1016/j.polymer.2016.06.017 ↗
20. 10.1016/j.jfluchem.2014.03.00110.1016/j.jfluchem.2014.03.001 ↗
21. 10.1039/c2jm32580b10.1039/c2jm32580b ↗
22. 10.1039/C5RA04483A10.1039/C5RA04483A ↗
23. 10.1126/science.271.5251.99710.1126/science.271.5251.997 ↗
24. 10.1063/1.165147310.1063/1.1651473 ↗
25. 10.1021/cm500365c10.1021/cm500365c ↗
26. 10.1021/la303884610.1021/la3038846 ↗
27. 10.1016/j.colsurfb.2007.06.01810.1016/j.colsurfb.2007.06.018 ↗
28. 10.1021/la802482710.1021/la8024827 ↗
29. 10.1021/la904027p10.1021/la904027p ↗
30. Chuiko A. A. · 2005
31. 10.1006/jcph.1995.103910.1006/jcph.1995.1039 ↗
32. 10.1080/0026897840010120110.1080/00268978400101201 ↗
33. 10.1103/PhysRevA.31.169510.1103/PhysRevA.31.1695 ↗
34. 10.1063/1.32869310.1063/1.328693 ↗
35. 10.1080/0021846860807122710.1080/00218468608071227 ↗
36. 10.1016/j.mseb.2005.03.03010.1016/j.mseb.2005.03.030 ↗
37. 10.1016/0042-207X(87)90018-210.1016/0042-207X(87)90018-2 ↗
38. Lacombe R. · 200510.1201/9781420028829 ↗
39. 10.1149/2.0051409jes10.1149/2.0051409jes ↗
40. 10.1016/S1359-6454(99)00254-210.1016/S1359-6454(99)00254-2 ↗
41. 10.1116/1.56892510.1116/1.568925 ↗
42. 10.1007/BF0241105410.1007/BF02411054 ↗
43. 10.1063/1.480809910.1063/1.4808099 ↗
44. 10.1038/s41598-017-10994-810.1038/s41598-017-10994-8 ↗
45. 10.1016/j.polymer.2014.12.02610.1016/j.polymer.2014.12.026 ↗
46. 10.1063/1.46491310.1063/1.464913 ↗
47. 10.1021/j100096a00110.1021/j100096a001 ↗
48. Materials Studio, Version 2018, Software for Technical Computation; Accelrys, I.S.D.: CA, USA, 2006.