journal article·2020-11Open access

Effect of Anode Slippage on Cathode Cutoff Potential and Degradation Mechanisms in Ni-Rich Li-Ion Batteries

Wesley M. Dose, Chao Xu, Clare P. Grey, Michael F.L. De Volder

Cell Reports Physical Science· Volume 1· Issue 11

Abstract

Li-ion batteries based on Ni-rich layered cathodes are the state-of-the-art technology for electric vehicles; however, batteries using these advanced materials suffer from rapid performance fading. In this work, we report a critical turning point during the aging of graphite/LiNi0.8Mn0.1Co0.1O2 (NMC811) full cells, after which the degradation is significantly accelerated. This turning point was identified using differential voltage analysis (DVA) applied to standard two-electrode data, which shows that graphite becomes progressively less lithiated, as confirmed by operando long-duration X-ray diffraction, and therefore has a higher electrochemical potential at the end of charge. This increase leads to a proportional increase in the cathode potential, and an accelerated impedance increase is observed from this point. This mechanism is expected to be universal for the vast majority of Li-ion battery chemistries, particularly for Ni-rich cathodes, whose degradation is extremely sensitive to the upper cutoff voltage, and our work provides fundamental guidelines for developing effective countermeasures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Performance and cost of materials for lithium-based rechargeable automotive batteries10.1038/s41560-018-0107-2 ↗
2. High-nickel layered oxide cathodes for lithium-based automotive batteries10.1038/s41560-019-0513-0 ↗
3. Learning from Electrochemical Data: Simple Evaluation and Classification of LiMO2-type-based Positive Electrodes for Li-Ion Batteries10.1002/ente.201700068 ↗
4. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
5. Oxygen Release and Its Effect on the Cycling Stability of LiNixMnyCozO2 (NMC) Cathode Materials for Li-Ion Batteries10.1149/2.0021707jes ↗
6. Capacity Fading of Ni-Rich Li[NixCoyMn1–x−y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?10.1021/acs.chemmater.7b05269 ↗
7. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries10.1016/j.electacta.2010.05.072 ↗
8. Electrolyte and SEI Decomposition Reactions of Transition Metal Ions Investigated by On-Line Electrochemical Mass Spectrometry10.1149/2.0511814jes ↗
9. Identifying the components of the solid-electrolyte interphase in Li-ion batteries10.1038/s41557-019-0304-z ↗
10. Chemical Reactivity Descriptor for the Oxide-Electrolyte Interface in Li-Ion Batteries10.1021/acs.jpclett.7b01655 ↗
11. Revealing electrolyte oxidation via carbonate dehydrogenation on Ni-based oxides in Li-ion batteries by in situ Fourier transform infrared spectroscopy10.1039/C9EE02543J ↗
12. Surface degradation of Li1–xNi0.80Co0.15Al0.05O2 cathodes: correlating charge transfer impedance with surface phase transformations10.1063/1.4954800 ↗
13. Cycling Behavior of NCM523/Graphite Lithium-Ion Cells in the 3–4.4 V Range: Diagnostic Studies of Full Cells and Harvested Electrodes10.1149/2.0081701jes ↗
14. Editors’ Choice—Hindering Rollover Failure of Li[Ni0.5Mn0.3Co0.2]O2/Graphite Pouch Cells during Long-Term Cycling10.1149/2.0801904jes ↗
15. Editors’ Choice—Capacity Fading Mechanisms of NCM-811 Cathodes in Lithium-Ion Batteries Studied by X-ray Diffraction and Other Diagnostics10.1149/2.0821915jes ↗
16. Transition metal dissolution and deposition in Li-ion batteries investigated by operando X-ray absorption spectroscopy10.1039/C6TA08865A ↗
17. Transition Metal Dissolution, Ion Migration, Electrocatalytic Reduction and Capacity Loss in Lithium-Ion Full Cells10.1149/2.1111702jes ↗
18. Nickel, Manganese, and Cobalt Dissolution from Ni-Rich NMC and Their Effects on NMC622-Graphite Cells10.1149/2.1151902jes ↗
19. Operando Monitoring of Early Ni-mediated Surface Reconstruction in Layered Lithiated Ni–Co–Mn Oxides10.1021/acs.jpcc.7b02303 ↗
20. Singlet oxygen evolution from layered transition metal oxide cathode materials and its implications for lithium-ion batteries10.1016/j.mattod.2018.03.037 ↗
21. Surface changes on LiNi0.8Co0.2O2 particles during testing of high-power lithium-ion cells10.1016/S1388-2481(02)00388-0 ↗
22. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries10.1038/ncomms4529 ↗
23. The Impact of Electrolyte Additives and Upper Cut-off Voltage on the Formation of a Rocksalt Surface Layer in LiNi0.8Mn0.1Co0.1O2 Electrodes10.1149/2.0651704jes ↗
24. Anisotropic Lattice Strain and Mechanical Degradation of High- and Low-Nickel NCM Cathode Materials for Li-Ion Batteries10.1021/acs.jpcc.6b12885 ↗
25. Microstructural Degradation of Ni-Rich Li[NixCoyMn1−x−y]O2 Cathodes During Accelerated Calendar Aging10.1002/smll.201803179 ↗
26. Degradation Mechanism of Ni-Enriched NCA Cathode for Lithium Batteries: Are Microcracks Really Critical?10.1021/acsenergylett.9b00733 ↗
27. Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion Batteries10.1002/aenm.201300787 ↗
28. Mn versus Al in Layered Oxide Cathodes in Lithium-Ion Batteries: A Comprehensive Evaluation on Long-Term Cyclability10.1002/aenm.201703154 ↗
29. Differential voltage analyses of high-power, lithium-ion cells: 1. Technique and application10.1016/j.jpowsour.2004.07.021 ↗
30. Differential voltage analyses of high-power lithium-ion cells: 2. Applications10.1016/j.jpowsour.2004.07.022 ↗
31. Evaluation of commercial lithium-ion cells based on composite positive electrode for plug-in hybrid electric vehicle applications. Part II. Degradation mechanism under 2C cycle aging10.1016/j.jpowsour.2011.08.078 ↗
32. Predicting and Extending the Lifetime of Li-Ion Batteries10.1149/2.060309jes ↗
33. Aging Analysis of Graphite/LiNi1/3Mn1/3Co1/3O2 Cells Using XRD, PGAA, and AC Impedance10.1149/2.0721514jes ↗
34. Differential voltage analyses of high-power lithium-ion cells. 4. Cells containing NMC10.1016/j.jpowsour.2009.08.019 ↗
35. A Wide Range of Testing Results on an Excellent Lithium-Ion Cell Chemistry to be used as Benchmarks for New Battery Technologies10.1149/2.0981913jes ↗
36. Long-Term Low-Rate Cycling of LiCoO2/Graphite Li-Ion Cells at 55°C10.1149/2.056206jes ↗
37. How Do Reactions at the Anode/Electrolyte Interface Determine the Cathode Performance in Lithium-Ion Batteries?10.1149/2.022304jes ↗
38. Aging Mechanisms of LiFePO4. Graphite Cells Studied by XPS: Redox Reaction and Electrode/Electrolyte Interfaces10.1149/2.024204jes ↗
39. Calendar aging of a graphite/LiFePO4 cell10.1016/j.jpowsour.2012.02.068 ↗
40. Electrochemical cycling behavior of LiFePO4 cathode charged with different upper voltage limits10.1016/j.electacta.2011.12.019 ↗
41. Aging in lithium-ion batteries: model and experimental investigation of harvested LiFePO4 and mesocarbon microbead graphite electrodes10.1016/j.electacta.2013.05.081 ↗
42. Cell degradation in commercial LiFePO4 cells with high-power and high-energy designs10.1016/j.jpowsour.2014.02.052 ↗
43. A Gold Micro-Reference Electrode for Impedance and Potential Measurements in Lithium Ion Batteries10.1149/2.0581610jes ↗
44. Study of Cathode Materials for Lithium-Ion Batteries: Recent Progress and New Challenges10.3390/inorganics5020032 ↗
45. A Mg-Doped High-Nickel Layered Oxide Cathode Enabling Safer, High-Energy-Density Li-Ion Batteries10.1021/acs.chemmater.8b03900 ↗
46. Li-Nb-O Coating/Substitution Enhances the Electrochemical Performance of the LiNi0.8Mn0.1Co0.1O2 (NMC 811) Cathode10.1021/acsami.9b09696 ↗
47. Role of surface coating on cathode materials for lithium-ion batteries10.1039/c0jm00154f ↗
48. Electrolyte additives for lithium ion battery electrodes: progress and perspectives10.1039/C6EE00123H ↗
49. The Role of Additives in Improving Performance in High Voltage Lithium-Ion Batteries with Potentiostatic Holds10.1149/2.0471701jes ↗
50. Dehydration Rather Than HF Capture Explains Performance Improvements of Li-Ion Cells by Ceramic Nanoparticles10.1021/acsaem.9b00976 ↗
51. Multifunctional Manganese Ions Trapping and Hydrofluoric Acid Scavenging Separator for Lithium Ion Batteries Based on Poly(ethylene-alternate-maleic acid) Dilithium Salt10.1002/aenm.201601556 ↗
52. Review—Multifunctional Separators: A Promising Approach for Improving the Durability and Performance of Li-Ion Batteries10.1149/2.0561903jes ↗
53. Electrode Behavior RE-Visited: Monitoring Potential Windows, Capacity Loss, and Impedance Changes in Li1.03(Ni0.5Co0.2Mn0.3)0.97O2/Silicon-Graphite Full Cells10.1149/2.0271606jes ↗
54. On Leakage Current Measured at High Cell Voltages in Lithium-Ion Batteries10.1149/2.1341702jes ↗
55. Staging Phase Transitions in LixCoO210.1149/1.1519850 ↗
56. Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping10.1038/s41560-018-0180-6 ↗
57. Chemical versus Electrochemical Electrolyte Oxidation on NMC111, NMC622, NMC811, LNMO, and Conductive Carbon10.1021/acs.jpclett.7b01927 ↗
58. Selecting the Best Graphite for Long-Life, High-Energy Li-Ion Batteries10.1149/2.1111809jes ↗
59. Does Polarization Increase Lead to Capacity Fade?10.1149/1945-7111/ab956b ↗
60. Formation of Lithium-Graphite Intercalation Compounds in Nonaqueous Electrolytes and Their Application as a Negative Electrode for a Lithium Ion (Shuttlecock) Cell10.1149/1.2220849 ↗
61. Operando X-ray diffraction during battery cycling at elevated temperatures: a quantitative analysis of lithium-graphite intercalation compounds10.1016/j.carbon.2017.02.002 ↗
62. Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries
63. Resistance Growth in Lithium-Ion Pouch Cells with LiNi0.80Co0.15Al0.05O2 Positive Electrodes and Proposed Mechanism for Voltage Dependent Charge-Transfer Resistance10.1149/2.0361910jes ↗
64. Alternating Current Impedance Electrochemical Modeling of Lithium-Ion Positive Electrodes10.1149/1.1928169 ↗
65. A Tutorial into Practical Capacity and Mass Balancing of Lithium Ion Batteries10.1149/2.0961712jes ↗
66. Application of a lithium–tin reference electrode to determine electrode contributions to impedance rise in high-power lithium-ion cells10.1016/j.electacta.2004.05.040 ↗
67. Electrochemical Modeling of Lithium-Ion Positive Electrodes during Hybrid Pulse Power Characterization Tests10.1149/1.2939211 ↗
68. New synchrotron powder diffraction facility for long-duration experiments10.1107/S1600576716019750 ↗