Source abstract
Abstract
We report a robust, 100% atom-efficiency strategy for preparing waste polycarbonate (WPC)-derived epoxy resin. To demonstrate the preparation process, we perform a pyridine-catalyzed model reaction between diphenyl carbonate (DPC) and diglycidyl ether of bisphenol A (DGEBA) in a molar ratio of 1:2. After epoxy-equivalent titration and two-dimensional nuclear magnetic resonance (2D-NMR) analysis, we confirm that the product is bis(1-(4-(2-(4-(oxiran-2-ylmethoxy)phenyl)propan-2-yl)phenoxy)-3-phenoxypropan-2-yl) carbonate (DPC-EP2). Based on the model reaction, three WPC-based epoxy resins (WPC-EPX, X = 2, 3, and 4) were prepared by the reaction of WPC with DGEBA in a molar ratio of 1:2, 1:3, and 1:4 in the presence of pyridine. The WPC-EPX epoxy resins were cured with WPC, phenol novolac (PN), diamino diphenylmethane (DDM), and dicyandiamide (DICY). The mechanical and thermal properties of the thermosets were discussed. We also prepared epoxy/carbon fiber composites and investigated the degradation of epoxy thermosets and the recycling of the carbon fiber. When the WPC-EP2 epoxy resin was cured with WPC, it can be successfully degraded to a phenoxy resin and 1,3-dihyexylurea through a catalyst-free aminolysis process. Undamaged carbon fibers have been recycled, according to the scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDS) and tensile stress–strain data. The transformation of WPC to WPC-EPX, the aminolysis of WPC-EP2/WPC to a phenoxy resin and 1,3-dihexylurea, and the recycling of carbon fiber in the composite have been successfully demonstrated. Therefore, we believe that this work contributes greatly to the field of “sustainable approaches in waste utilization.”
Source: openalex_inverted_index · Quality: baseline
Affiliations
Department of Chemical Engineering, National Chung Hsing University, No. 145, Xingda Road, South District, Taichung 40227, Taiwan
Advanced Research Center for Green Materials Science and Technology, National Taiwan University, 106, No. 1, Section 4, Roosevelt Road (Room 219, School of Engineering Complex), Taipei 10617, Taiwan
Advanced Material Development Department, Swancor Highpolymer Company Limited, Nantou 54066, Taiwan
Department of Chemistry and Biochemistry, University of California, Santa Barbara, California 93106-9510, United States
Funding
Ministry of Science and Technology · Advanced Research Center for Green Materials Science and Technology, National Taiwan University