journal article·2023-02Open access

Principle and application of air-layer integrated radiant cooling unit under hot and humid climates

Nan Zhang, Hang Wan, Yuying Liang, Huijun Wu, Xinhua Xu, Sek Ming Suen, Gongsheng Huang

Cell Reports Physical Science· Volume 4· Issue 2

Abstract

Radiant cooling systems offer several advantages over conventional air-cooling systems, such as better thermal comfort, quieter operation, and less air ductwork. However, their application is limited owing to high condensation risk, particularly in hot and humid climates. To reduce this risk and enhance the cooling capacity, an air-layer-integrated radiant cooling unit (AIRCU) is developed. The unit uses an infrared transparent membrane to seal a dry-air layer between the membrane and the radiant cooling surface, separating the radiant cooling surface from the air-contact surface. Here, we report a comprehensive study on the AIRCU, including (1) suitable membrane materials; (2) a method for estimating the membrane temperature; (3) the feasible range of the radiant cooling surface temperature; and (4) the cooling capacity and thermal comfort under different humidity environments. The experimental and numerical analysis results demonstrate that AIRCU is a potential alternative cooling system for hot and humid climates.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · Building Energy and Comfort Optimization · Radiative Heat Transfer Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Owen · 2016
2. Ten questions about radiant heating and cooling systems10.1016/j.buildenv.2016.11.030 ↗
3. Thermal comfort assessment and application of radiant cooling: a case study10.1016/j.buildenv.2006.04.025 ↗
4. Model predictive control of radiant slab systems with evaporative cooling sources10.1016/j.enbuild.2014.11.037 ↗
5. Effects of radiant terminal and air supply terminal devices on energy consumption of cooling load sharing rate in residential buildings10.1016/j.enbuild.2012.02.052 ↗
6. A model predictive control strategy to optimize the performance of radiant floor heating and cooling systems in office buildings10.1016/j.apenergy.2019.03.209 ↗
7. A model-based multi-objective optimization of energy consumption and thermal comfort for active chilled beam systems10.1016/j.apenergy.2021.116531 ↗
8. Indoor climate in rooms with cooled ceiling systems10.1016/0360-1323(94)90024-8 ↗
9. Evaluation of cooling ceiling and mechanical ventilation systems on thermal comfort using CFD study in an office for subtropical region10.1016/j.buildenv.2011.09.002 ↗
10. Hydronic radiant cooling—preliminary assessment10.1016/0378-7788(95)00922-K ↗
11. Experimentally-determined characteristics of radiant systems for office buildings10.1016/j.apenergy.2018.03.121 ↗
12. Indoor humidity behaviors associated with decoupled cooling in hot and humid climates10.1016/S0360-1323(02)00018-5 ↗
13. A combined system of chilled ceiling, displacement ventilation and desiccant dehumidification10.1016/j.buildenv.2006.08.020 ↗
14. A case study on feasible performance of a system combining an airbox convector with a radiant panel for tropical climates10.1016/j.buildenv.2014.10.012 ↗
15. Experimental investigation on the heat transfer performance and water condensation phenomenon of radiant cooling panels10.1016/j.buildenv.2013.09.016 ↗
16. Condensation issues with radiant cooling panels
17. Heat transfer and cooling characteristics of concrete ceiling radiant cooling panel10.1016/j.applthermaleng.2015.03.045 ↗
18. Thermal comfort and IAQ analysis of a decentralized DOAS system coupled with radiant cooling for the tropics10.1016/j.buildenv.2014.09.001 ↗
19. Evaluation of thermal comfort using combined CFD and experimentation study in a test room equipped with a cooling ceiling10.1016/j.buildenv.2008.11.015 ↗
20. Performance of desiccant dehumidification with hydronic radiant cooling system in hot humid climates10.1016/j.enbuild.2012.01.031 ↗
21. Performance evaluation of a radiant floor cooling system integrated with dehumidified ventilation10.1016/j.applthermaleng.2007.10.020 ↗
22. Application of radiant floor cooling in large space buildings - a review10.1016/j.rser.2015.11.028 ↗
24. Advanced textiles for personal thermal management and energy10.1016/j.joule.2020.02.011 ↗
26. Temperature regulation in colored infrared-transparent polyethylene textiles10.1016/j.joule.2019.03.015 ↗
27. Smart polyethylene textiles for radiative and evaporative cooling10.1016/j.joule.2021.03.019 ↗
28. Membrane-assisted radiant cooling for expanding thermal comfort zones globally without air conditioning10.1073/pnas.2001678117 ↗
29. The cold tube: membrane assisted radiant cooling for condensation-free outdoor comfort in the tropics10.1088/1742-6596/1343/1/012080 ↗
30. A fresh (air) look at ventilation for COVID-19: estimating the global energy savings potential of coupling natural ventilation with novel radiant cooling strategies10.1016/j.apenergy.2021.116848 ↗
31. Heat exchange coefficient between floor surface and space by floor cooling — theory or a question of definition
32. Fanger · 1970
33. Owen · 2017
34. Howell · 2010
35. Natural convection and radiation in a panel heated room
36. Natural convective heat transfer coefficient - a review II. Surfaces in two- and three-dimensional enclosures10.1016/S0196-8904(00)00043-1 ↗
37. Natural convective heat transfer coefficient - a review I. Isolated vertical and horizontal surfaces10.1016/S0196-8904(00)00042-X ↗
38. New equations for computing vapor pressure and enhancement factor10.1175/1520-0450(1981)020<1527:NEFCVP>2.0.CO;2 ↗
39. Liu · 2019
40. Adaptability of a temperature and humidity independent control air-conditioning system in green office buildings
41. Thermal comfort under radiant asymmetries of floor cooling system in 2 h and 8 h exposure durations10.1016/j.enbuild.2019.02.009 ↗
42. Estimating clothing thermal insulation using an infrared camera10.3390/s16030341 ↗
43. Clothing insulation and temperature, layer and mass of clothing under comfortable environmental conditions10.1186/1880-6805-32-11 ↗
44. Humidity’s impact on greenhouse gas emissions from air conditioning10.1016/j.joule.2022.02.013 ↗
45. Overhead radiation and comfort